Instruction/ maintenance manual of the product MINIAMP AMP800 Behringer
Go to page of 13
User’s Manual Version 1.1 October 2005 MINIAMP AMP800.
2 MINIAMP AMP800 IMPORT ANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
3 MINIAMP AMP800 DEUTSCH AMP800 MINIAMP Ultra-Compact 4-Channel Stereo Headphone Amplifier V Ultra-compact 9.5" headphone amplifier system for studio and stage applications V 4 totally independen.
4 MINIAMP AMP800 FOREWORD Dear Customer, Thank you very much for expressing your confidence in BEHRINGER products by purchasing the MINIAMP AMP800. Writing this foreword for you gives me great pleasur.
5 MINIAMP AMP800 DEUTSCH 1. INTRODUCTION Thank you very much for expressing your confidence in our products by purchasing one of our headphone amplifier systems. This 4-channel stereo headphone amplifier is designed for use with all types of headphones and therefore provides maximum flexibility.
6 MINIAMP AMP800 1.1.2 Initial operation Do not put the AMP800 on any equipment that generates intense heat, for example an amplifier. Ensure that the ventilation openings that are located on the top panel of the AMP800 are not covered or blocked. T o power the AMP800, use only the power supply unit that is delivered with your equipment.
7 MINIAMP AMP800 DEUTSCH 2. CONTROL ELEMENTS BALANCE control : To adjust the stereo image of a signal, turn this control toward L (left) or, alternatively R (right). A + B meter : To monitor the combined level of both signals (A and B), use this meter.
8 MINIAMP AMP800 3. SETUP EXAMPLE LINK OUT A connectors : If you need more than the 4 Headphone Channels that a single AMP800 provides, connect these balanced, ¼" TRS connectors ( L eft and R ight) to the inputs of another AMP800. The LINK OUT A connectors send only the signal of Input Channel A, without any LEVEL or BALANCE settings.
9 MINIAMP AMP800 DEUTSCH 4. AUDIO CONNECTIONS 4. AUDIO CONNECTIONS The following provides illustrations of patch cords that include unbalanced, ¼" TS plugs and balanced, ¼" TRS plugs: Fig. 4.1: Patch cord with unbalanced, ¼" TS plugs Fig.
10 MINIAMP AMP800 5. SPECIFICA TIONS 5. SPECIFICA TIONS INPUT Type ¼" TRS connector, balanced Impedance approx. 20 k Ω, balanced approx. 10 k Ω, unbalanced CMRR 40 dB typ. @ 1 kHz PHONES OUT Type ¼" TRS connector, stereo Impedance min.
11 MINIAMP AMP800 DEUTSCH 6. OTHER MINI PRODUCTS The MINIAMP belongs to the MINI suite of BEHRINGER products, which can operate together and are introduced below: M M M M M INIFEX FEX800 INIFEX FEX800 INIFEX FEX800 INIFEX FEX800 INIFEX FEX800 Ultra-compact 9.
12 MINIAMP AMP800 7. W ARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
13 MINIAMP AMP800 DEUTSCH 4. Damages/defects caused by the following conditions are not covered by this warranty: V improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals.
An important point after buying a device Behringer MINIAMP AMP800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer MINIAMP AMP800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer MINIAMP AMP800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer MINIAMP AMP800 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer MINIAMP AMP800 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer MINIAMP AMP800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer MINIAMP AMP800.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer MINIAMP AMP800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer MINIAMP AMP800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
