Instruction/ maintenance manual of the product CSEFE10XX-10X Transition Networks
Go to page of 7
User’ s Guide CSEFE10xx-10x Slide-in-Module Media Converter • Switchable Ethernet and Fast Ethernet • 10 Mb/s Copper to Fiber • 100 Mb/s Copper to Fiber Transition Networks CSEFE10xx-10x serie.
2 CSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the jumper or when installing the media converter.
4 CSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Install the Fiber Cable The CSEFE10xx-10x is designed to be installed in pairs over the fiber link, where one is the local media converter and the other is the remote.
6 CSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation -- Continued SNMP Use SNMP at an attached terminal or at a remote location to monitor the media.
8 CSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T echnical Specifications For use with Transition Networks Model CSEFE10xx-10x or equivalent. Standards: IEEE 802.3™, 10Base-T, 100Base-TX, 100Base-FX Data Rate: 10 Mb/s, 100 Mb/s Dimensions: 3.
10 CSEFE10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting -- Continued 6. Is the TP-ACT LED illuminated? NO • Check the twisted-pair copper cables for proper connection. • Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.
An important point after buying a device Transition Networks CSEFE10XX-10X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks CSEFE10XX-10X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks CSEFE10XX-10X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks CSEFE10XX-10X you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks CSEFE10XX-10X will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks CSEFE10XX-10X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks CSEFE10XX-10X.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks CSEFE10XX-10X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks CSEFE10XX-10X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
