Instruction/ maintenance manual of the product 1004 Transition Networks
Go to page of 12
Model 1004 (E-TBT -HB-1004) 7366.C For assistance in installing, using, or maintaining the TRANSITION Networks Model 1004 Ethernet™ Repeater Hub, contact TRANSITION Networks T echnical Support at: (800) 260-1312 or contact your local distributor . Model 1004 12-Port Ethernet Hub MODEL 1004 12-PORT HUB SPECIFICA TIONS Standards IEEE 802.
Model 1004 12-Port Ethernet™ Repeater Hub 20 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.
Model 1004 12-Port Ethernet™ Repeater Hub T able of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Model 1004 Repeater Hub . . . . . . . . . . . . . . . . . . . . . . .1 Model 1004 Repeater Hub Features . . . . . . .
Model 1004 12-Port Ethernet™ Repeater Hub 18 1 1. INTRODUCTION This guide is intended for the system or network administrator responsible for installing and monitoring a TRANSITION Networks Model 1004 12-Port Ethernet™ Repeater Hub.
Model 1004 12-Port Ethernet™ Repeater Hub 2 17 Networking the Model 1004 Repeater Hub The Model 1004 Repeater Hub can be installed in an Ethernet network by connecting 10BaseT cable between RJ-45 connectors on the front of the hubs.
Model 1004 12-Port Ethernet™ Repeater Hub 16 3 1004 Repeater Connectors, Indicators and Switch Connectors Twelve (12) RJ-45 10BaseT connectors are located on the front of the Model 1004 Repeater Hub. One (1) power connector is located on the back of the Model 1004 Repeater Hub.
Model 1004 12-Port Ethernet ™ Repeater Hub 4 15 4. OPERA TION The Model 1004 Repeater Hub requires no intervention beyond occasionally monitoring the Power and Status LEDs. Monitoring Power LED The green Power LED is illuminated when the Model 1004 Repeater Hub is connected to power.
Model 1004 12-Port Ethernet ™ Repeater Hub 14 5 Connecting Power to Model 1004 Repeater To power ON the Model 1004 Repeater: 1. At Model 1004 Repeater back, locate the Unit power receptacle and associated fuse. 2. Verify that fuse is installed at correct setting for power source voltage.
Model 1004 12-Port Ethernet ™ Repeater Hub 6 13 Male AUI Connector/PC Connection The male AUI card (E-AUI- DC-SIC) provides a male AUI connector for connection, through an AUI drop cable, to a 10Base5 port on a powered PC.
Model 1004 12-Port Ethernet ™ Repeater Hub 12 7 3. INST ALLA TION To install the Model 1004 Repeater Hub: • Unpack the Model 1004 Repeater Hub. • Install Model 1004 Repeater Hub on flat surface. • Optionally install Slide In Card. • Connect Cable to SIC and RJ-45 connectors.
Model 1004 12-Port Ethernet ™ Repeater Hub T wisted Pair Connector/10BaseT Connection To connect 10BaseT Cable to Model 1004 Repeater RJ-45 connectors: 1.
Model 1004 12-Port Ethernet ™ Repeater Hub 10 9 Connecting Cable to SIC/RJ-45 Connectors Connections between installed Model 1004 Repeater Hub SICs or between a Model 1004 Repeater Hub SIC and a hub.
An important point after buying a device Transition Networks 1004 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks 1004 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks 1004 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks 1004 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks 1004 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks 1004, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks 1004.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks 1004. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks 1004 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
