Instruction/ maintenance manual of the product 4TWX606OB Trane
Go to page of 8
18-BC55D1-2 Pumps 4TWX6 ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES IMPORTANT -- This Document is customer property and is to remain with this unit. Please return to service information pack upon completion of work.
|nsta||er's Guide @ BASEPAN TAB REMOVAL installing the unit under a bedroom, kitchen, or picture window may be annoying to the customer since conden- sate and fog will occur during the defrost cycle.
|nsta||er's Guide © GAS LiNE SERVICE VALVE CAP _ _ 1/4 TURN ONLY COUNTERCLOCKWISE FOR FULL OPEN I .... POSITION ........ F"_ STE" OF VALVE PRESSURE TAP PORT J GAS LINE CONNECTION CAP _ D.
|nstaI|er's Guide 10. Replace liquid service pressure tap port cap and valve stem cap. These caps MUST BE REPLACED to prevent leaks. Replace valve stem and pressure tap cap finger tight, then tighten an additional 1/6 turn. 11. The gas valve can now be opened.
|nsta||er's Guide H. OPERATIONAL AND CHECKOUT PROCEDURES Final phases of this installation are the unit Operational and Checkout Procedures which are found in this instruction on page 8. To obtain proper performance, all units must be operated and charge adjustments made in accordance with procedures found in the Service Facts.
|nsta||er's Guide 4TWX6 OUTLINE DRAWING NOTE: ALL DIMENSIONS ARE IN IVllVl (INCHES). SERVICE PANEL ...................................... ELECIRICA[ AND REFRIGERANF COMPONENT CLEARANCPS PER PREVA.
|nstal|er's Guide MOUNTING HOLE LOCATION NOTE: ALL DIMENSIONS ARE IN MM (INCHES). _DRIII 4 P[ /.,¢ES }}!_ (i5 i9) 22i (869) NOTE: T 317 (12.48) For model base size, see table on page 6. .......................................... ,82 ( 5 99) ....
|nsta||er's Guide CHECKOUT PROCEDURE After installation has been completed, it is recommended that the entire system be checked against the following list: 1. Refrigerant Line, Leak checked .................................. [ 2. Suction Lines and Fittings properly insulated .
An important point after buying a device Trane 4TWX606OB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Trane 4TWX606OB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Trane 4TWX606OB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Trane 4TWX606OB you will learn all the available features of the product, as well as information on its operation. The information that you get Trane 4TWX606OB will certainly help you make a decision on the purchase.
If you already are a holder of Trane 4TWX606OB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Trane 4TWX606OB.
However, one of the most important roles played by the user manual is to help in solving problems with Trane 4TWX606OB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Trane 4TWX606OB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
