Instruction/ maintenance manual of the product TL-POE10R TP-Link
Go to page of 10
User Guide TL-POE10R PoE Splitter Rev:4.0.0 7106503936.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and p roduct names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications no t expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CONTENTS Package Contents ................................................................... 1 Chapter 1 Introduction ........................................................ 1 1.1 Overview of the Product .............................................
1 Package Contents The following items should be found in your package. ¾ TL-POE10R PoE Splitter ¾ One Ethernet (CAT5 UTP ) Cable ¾ One Power Cable ¾ This User Guide ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor.
2 1.2 Features ¾ Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af standards ¾ Data and Power carried over the same cable ¾ Supports optional 5V DC, 9V DC or 12V DC power supply ¾ .
3 Chapter 3 Connecting the PoE Splitter You can use TL-POE10R PoE Splitter with PSE or PoE Injector to expand your net work to where there are no p ower lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. The following steps will tell you how to connect the PoE Splitter correctly.
4 3. Connect the LAN OUT port to the Ethernet device with CAT5 UTP cable for data transmitting. 4. Connect the DC OUT port to th e power port of the same Ethernet device with the provided power cable. ) Note: The power of Ethernet device is suggested to be under 10W.
5 Appendix: Specifications Normal Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab IEEE 802.3af, Voltage Output DC 5V, 9V or 12V Power Output 12V/1A, 9V/1A, 5V/2A Ports 1 10/100/1000Mbps Auto-Negotiati.
An important point after buying a device TP-Link TL-POE10R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TL-POE10R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TL-POE10R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TL-POE10R you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TL-POE10R will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TL-POE10R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TL-POE10R.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TL-POE10R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TL-POE10R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
