Instruction/ maintenance manual of the product XM-6802B Toshiba
Go to page of 15
TOSHIBA AMERICA INFORMA TION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA XM-6802B CD-R OM DRIVE USER MANU AL.
CONTENTS Introductio n .............................................................................. 1 Setup ........................................................................................ 3 Using the CD-R OM Drive ..........................
1 INTR ODUCTION – XM-6802B CD-ROM Drive General Features Tray Loading Mechanism 3-way Disc Eject (ej ect button, software, emergency eject hole ) DAE (Digital Audio Extraction) Audio Capability MPC3.
① CD Tray Insert CD Disc in tray ➁ Busy Indicator When you install a disc into the CD -ROM drive, the BUSY light flashes slowly as it attemp ts to locate the disc. One of the following will occur: • BUSY light goes out. The CD-ROM drive is ready to read data from the disc.
3 SETUP – XM-6802B CD-R OM The following steps must be performe d to properly install your drive: • Set CD-ROM Dri ve Jumper Settings • Connect Audio Cable (o ptional) • Attach IDE BUS Cable • Attach Power Cable • Mount Drive Jumper Settings The mode select jumpers are 6 straight angle pi n s located on the rear of the CD-ROM drive.
4 Placing CD-ROM Drive inside your Computer Now that you have set the jumpers, you are read y to install your CD-ROM drive inside your computer. Important Note: Disconnect power fr om your co mputer system befo re beginning installation. Remove computer co ver and faceplate if required.
5 Power Cable - Connect an internal computer p ower supply cable to the power so cket at the back of the CD- ROM drive. One side of the plug has ch amfered edges, so the power conne ctor fits only one way. Push plug completely into the socket making sure t he plug fits correctly.
6 USING THE CD-ROM Drive – XM-6802B Drive Operation Inserting a Disc - Horizontally To insert a disc into a drive that is moun ted horizont ally, perform the following steps: Figure 1.Inserting Disc 1. Open the drive's L oading tra y b y pressing the Eject Button.
7 Removing a Disc To remove a disc from the CD-ROM drive, perform the following steps: 1. Open the Loading T ray by pressing the Eject Button. 2. Grasp disc by edges , and lift out of loading tra y . 3. Press Eject Button again to close Loading T ray .
8 Cleaning Media Try to avoid touching the read area (un derside) of the disc as dirt and smears will degra de the disc accessing speed. If the disc becomes dirty wipe it with a damp soft cloth. Avoid cl eaning in a circular motion, but rather from the inner side outward.
9 TR OUBLESHOO TING – XM-6802B Problem Solution Disc tra y cannot be opened • Check that there is pow er to drive. • Use Emergency Eject instructi ons to open tray . Drive is not recognized by system • Is the drive connected proper ly? Are all cables plugged in proper ly (e.
10 SPECIFICA TIONS –XM-6802B General Interface ATAPI Compatible CD-ROM Standards CD-DA (Red-Book) - Stand ard Audio CD & CD-Text CD-ROM (Yellow-Book Mode 1 & 2) - Standard Data CD-ROM XA (Mo.
11 Power DC Voltage and Current Requi rements 5V 5%, 12V 10% Physical Height 5.83" (148.2mm) Width 1.65" (42mm) Depth 7.24" (184mm) W eight 1.66lbs (740g) Connectors DC input AMP 1-480424-0 or equival ent, 2m max ATAPI Interface Connector 40 Pin ATAPI Standard, 0.
12 DRIVE CONNECT ORS –XM-6802B Figure 1.XM-6802B CD-ROM Drive Rear Panel - Connec tors Power Connector Power is supplied to your CD-ROM d rive by the connection with your computer's +5V/+12V power cable to the powe r socket at the back of drive.
13 Table 1.Interface Pin Assignments INTERFACE PIN ASSIGNMENT PIN NO . I/O SIGNAL NAME HOST SIGNAL NAME PIN NO . I/O SIGNAL NAME HOST SIGNAL NAME 1 I Reset Host Reset 21 O HDRQ DMA Request 2 - GND 22 .
An important point after buying a device Toshiba XM-6802B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba XM-6802B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba XM-6802B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba XM-6802B you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba XM-6802B will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba XM-6802B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba XM-6802B.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba XM-6802B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba XM-6802B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
