Instruction/ maintenance manual of the product TLP-MT7E Toshiba
Go to page of 80
1 Before use CONTENTS O WNER’S MANU AL 3LCD PROJECT OR TLP-MT7E T E M P L A M P O N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U I N P U T V O L / A D J .
2 Before use SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to aler t the user to the presence of uninsulated “ dangerous v oltage ” within the product ’ s enclosure that ma y be of sufficient magnitude to constitute a risk of electric shock to persons .
3 Before use CONTENTS IMPORT ANT PRECAUTIONS In the spaces provided belo w , record the Model and Ser ial No . located at the bottom of y our LCD projector .
4 Before use 3. Source of Light Do not look into the lens while the lamp is on. The strong light from the lamp ma y cause damage to your ey es or sight.
5 Before use CONTENTS 5. Heat The product should be situated aw ay from heat sources such as radiators, heat registers, sto v es, or other products (including amplifiers) that produce heat.
6 Before use 13. Stack Inhibited Do not stack other equipment on this product or do not place this product on the other equipment. T op and bottom plates of this product de v elops heat and ma y give some undesirab le damage to other unit.
7 Before use CONTENTS 17. If glass components, including lens and lamp, should break, contact your dealer for repair service. This product incor porates glass components, including a lens and a lamp . If such par ts should break, please handle with care to av oid injur y and contact your dealer f or repair ser vice.
8 Before use Power supply cord selection If your line v oltage is 220 to 240V , use one of the following types of cable. In Singapore, use the UK type plug cable.
9 Before use CONTENTS Contents Before use SAFETY PRECAUTIONS ...................................................... 2 IMPORT ANT PRECAUTIONS ............................................... 3 IMPORT ANT SAFETY INSTRUCTIONS .............................
10 Before use Names of each part on the main unit Continued T E M P L A M P O N B U S YF A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U IN P U T V O L /A D J . T E M P L A M P O N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N T E R M E N U I N P U T V O L / A D J .
11 Before use CONTENTS Names of each part on the main unit (continued) Continued TEM P LAMP ON BUSY FA N ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL /A DJ. TEMP LAMP ON BUSY F AN ON/ST ANDBY KEYSTONE SET AU TO AU TO EXIT ENTER MENU INPUT V OL/ADJ.
12 Before use COMPONENT IN ( COMPUTER ) CONTROL S-VIDEO VIDEO VIDEO IN R - A UDIO - L A UDIO IN 21 23 22 22 22 21 23 VIDEO jack T o enter video signal from a video equipment, etc. A UDIO(L/R) jacks T o enter audio signal from a video equipment, etc. CONTROL connector (RS-232C connector) T o connect a computer to control the projector .
13 Before use CONTENTS Names of each part on the remote control MENU ON / INPUT ENTER CT-90072 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL/ADJ STANDBY INPUT button MUTE button RESIZE button.
14 Before use Loading batteries Notes Using batteries incorrectly can cause them to leak or burst. Str ictly obser v e the following. • Install the batteries with their + and – ends facing correctly . • Do not charge, heat, disassemb le, or shor t the batteries or throw them into a fire.
15 Before use CONTENTS Remote control operation P oint the remote control at the infrared remote sensor and press a b utton. Notes • The remote control ma y not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor .
Installation and connection 16 Floor-mounted projector placement Floor-mounted front projection Viewing a picture projected on the front of the screen from a floor installation. Floor-mounted rear projection Viewing a picture projected through the bac k of the screen from a floor installation.
CONTENTS Installation and connection 17 Place the projector on a steady , level surface such as a table. T o obtain proper screen projected, place the projector so that the projecting light hits the screen squarely . Floor-mounted projector placement (continued) T op vie w Screen b(cm) 28 - 1.
Installation and connection 18 Connect the power cord. • Inser t one end in the A C IN socket on the projector . • Inser t the other end in a wall outlet.
CONTENTS Installation and connection 19 Projector placement angle adjustment F oot adjuster release button F oot adjuster The tilt of the projector can be adjusted using the f oot adjuster . Lift the front of the projector until a tilt angle desired is obtained and hold down the foot adjuster release button.
Installation and connection 20 Ceiling-mounted front projection Viewing a picture projected on the front of the screen from a ceiling installation. Ceiling-mounted rear projection Viewing a picture projected through the bac k of the screen from a ceiling installation.
CONTENTS Installation and connection 21 Connecting video equipment Y ou can project the picture from video equipment with component video output jack. Check that the po wer f or the projector and video equipment is off bef ore connecting the cables.
Installation and connection 22 Connecting video equipment (continued) Note The S-VIDEO connector and VIDEO jack can be used independently , but the audio input jacks are used as both the S-VIDEO and VIDEO input. Y ou can project the picture from video equipment by using VIDEO IN connectors.
CONTENTS Installation and connection 23 Notes • The projector cannot be connected to a computer without an analog RGB connector . For details , refer to the computer manual. • Y ou may not be ab le to connect some computers to the projector . For details , consult the dealer .
Installation and connection 24 Projector operation control by a computer C O M P O N E N T IN ( C O M P U T E R ) C O N T R O L S-VIDEO VIDEO V I D E O I N R - A U D I O - L AUDIO IN COMPONENT IN ( CO.
Operations 25 T urn on the connected equipment and put it in playback mode. Select “Cancel” when the dialog box of Add Ne w Hardware Wizard screen appears on the computer when connecting a computer . Preparation 1 Install and connect the projector properly .
26 Operations Projection on the screen (continued) Select the input source. Press the INPUT button repeatedly to select it. The icon of the input source selected appears.
Operations 27 Notes • When changing the projecting angle, adjust the f oot adjuster . 19 • When the screen image is distor ted in ke ystone, press the AUTO KEYST ONE b utton. 29 • The projector ma y stop operating if the surrounding temperature is too high or if the air filter is clogged with dust.
28 Operations T urning the power off Press ON/ST ANDBY after using the projector . An instruction message appears. Press ON/ST ANDBY again. Cooling star ts. Once cooling is completed, the LAMP and F AN indicators turn off and the standby mode is set. (The ON indicator tur ns in orange .
Operations 29 Correcting the keystone distortion A picture ma y be expanded on the upper side if projected upw ard from the projector lifted up b y the foot adjuster .
30 Operations Y ou can enlarge (resize) the picture size projected. Enlarging the picture size Press RESIZE ( ) . The enlargement ratio increases each time the RESIZE ( ) button is pressed. The enlargement ratio can be increased continuously b y keeping the button pressed in.
Operations 31 Cutting off the picture and sound temporarily The image and sound of this projector can be turned off if you wish to temporarily project the image of another projector or a OHP , etc., on the screen. Note The mute mode is cancelled if another operation is perf ormed dur ing the mute mode.
32 Operations Freezing the picture Y ou can freeze the image being projected. Use this function to stop images from a video recorder to make presentations . Notes • The freeze mode is cancelled if an y other operation is performed during the freeze mode.
Operations 33 Notes • A utomatic adjustment may not be perf ormed proper ly f or signals other than the computer ’ s signals with which the projector is compatible 73 . • The horizontal position, vertical position, sampling phase and sampling frequency can also be adjusted from the menu screen 44 .
34 Operations Press PIP . A sub-picture is displa yed. Press the PIP button again to turn off the sub-picture. Video or S-video images can be displa y ed as small images on the computer ’ s image. (Referred to as “ sub-pictures ” in this manual.
Operations 35 CALL Notes • The inf ormation displayed is not refreshed e ven if it changes . T o refresh the information, turn off the inf ormation display , then tur n it back on. • The inf ormation display turns off if any other operation is perf ormed.
36 Adjustments & Settings Adjustments and settings on the menu screen 38 44 52 54 57 61 QUICK MENU Item Meaning Contrast Adjust the image contrast Brightness Adjust the image brightness (paying at.
Adjustments & Settings 37 Computer 0 Picture mode Bright True color 0 0 QUICK MENU Contrast Brightness Adjust the contrast of the image. Kystone Input source setting Language +6 [ENTER] [ENTER] ME.
38 Adjustments & Settings Preparation 1 Project a picture on the screen as e xplained in the step “Projection on the screen”. 25 Press MENU. The QUICK MENU appears.
Adjustments & Settings 39 T E M P L AM P O N BU SY FA N O N /S TA N D B Y KE Y S TO N E S E T A U T O A U T O E X IT E N TE R M E N U IN P U T V OL /A D J .
40 Adjustments & Settings 3-a VOL/ADJ . T E M P L A M PO N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N T E R M E N U I N P U T V O L /A D J . TEMP LAMP ON BUSY F AN ON/ST ANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
Adjustments & Settings 41 When selecting “ Input source setting ” in step 2. (Set the input source that can be selected by the INPUT button.) Use the selection buttons ( / ) to select the input source to be set, then press ENTER to check it. • The check turns on and off each time the ENTER button is pressed.
42 Adjustments & Settings QUICK MENU adjustments and settings (continued) MENU ON / INPUT ENTER CT-90072 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL/ADJ STANDBY TEMP LAMP ON BUSY F AN ON/ST ANDBY KEYSTONE SET AUTO AUTO MENU INPUT VOL/ADJ .
Adjustments & Settings 43 QUICK MENU adjustments and settings (continued) 4 After the adjustments and settings are finished, press EXIT . The menu screen disappears. T E M P L A M PO N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U TO A U T O E X IT E N T E R M E N U IN P U T V O L / A D J .
44 Adjustments & Settings 2 Press MENU twice. When pressed once, the Q UICK MENU screen appears. When pressed twice, the “ Picture ” screen of the FULL MENU appears. 1 T E M P LA M P O N B U S Y F A N O N / S T A N D B Y K E Y S T ON E S E T A U T O A U T O E X IT E NT E R M E N U I N P U T V O L /A D J .
Adjustments & Settings 45 3-a T E M P L A M P O N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N TE R M E N U IN P U T V O L / A D J. T E M P L A M P O N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N T E R M E N U IN P U T V O L / AD J .
46 Adjustments & Settings Continued (Continued) 3-a SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSS.
Adjustments & Settings 47 T E M P L A M P O N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U I N P U T V O L / A D J .
48 Adjustments & Settings T E M P L A M P O N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U I N P U T V O L /A D J . TEMP LAMP ON BUSY FAN ON/ST ANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
Adjustments & Settings 49 TE M P L A M P O N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N T E R M E N U IN P U T V O L / A D J . TEMP LAMP ON BUSY FAN ON/ST ANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
50 Adjustments & Settings T E M P L A M P O N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U IN P U T V O L / A D J . TEMP LAMP ON BUSY FAN ON/ST ANDBY KEYSTONE SET AUTO AUTO EXIT ENTER INPUT VOL/ADJ .
51 Adjustments & Settings T E M P L A M PO N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N T E R M E N U IN P U T V O L /A D J .
52 Adjustments & Settings T E M P L A M P O N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N T E R M E N U IN P U T V O L / A D J . TEMP LAMP ON BUSY FAN ON/ST ANDBY KEYSTONE SET AUTO AUTO EXIT ENTER INPUT VOL/ADJ .
53 Adjustments & Settings Press ENTER. The sub-menu of “ Hor izontal ref erence value reset ” appears. Use the selection buttons ( / ) to select “ Ye s ” and press ENTER.
54 Adjustments & Settings T E M P L A M P O N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U I N P U T V O L / A D J . TEMP LAMP ON BUSY F AN ON/ST ANDBY KEYSTONE SET AUTO AUTO EXIT ENTER INPUT VOL/ADJ .
55 Adjustments & Settings Press ENTER. The sub-menu of “ Language ” appears. Use the selection buttons ( / ) to select a language. Press EXIT to return to the FULL MENU.
56 Adjustments & Settings T E M P L A M PO N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U IN P U T V O L /A D J .
57 Adjustments & Settings T E M P L A M P O N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N T E R M E N U IN P U T V O L / AD J. TEMP LAMP ON BUSY F AN ON/ST ANDBY KEYSTONE SET AUTO AUTO EXIT ENTER INPUT VOL/ADJ .
58 Adjustments & Settings T E M P L A M PO N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X IT E N T E R M E N U IN P U T V O L / A D J .
59 Adjustments & Settings Press ENTER. The sub-menu of “ Projection mode ” appears. Use the selection buttons ( / ) to select the projection mode. Select the installation position of the projector . Confirm by ref erring to the char t on page 16 , 20 .
60 Adjustments & Settings T E M P L A M P O N B U S Y F A N O N / S T A N D BY K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U IN P U T V O L /A D J .
61 Adjustments & Settings TE M P L AM P O N B U S Y F A N O N /S TA N D BY K E Y S T O N E S E T A U T O A U T O E X IT E N TE R M E NU IN PU T V O L /AD J.
62 Adjustments & Settings TE M P L A M P O N BU S Y F A N O N /ST A N D BY KE Y S T ON E S ET A U T O A U TO E X IT E N T E R M E N U IN P U T V O L/A D J.
63 Adjustments & Settings 1 3 1 3 2 2 T E M P L A M P O N B U S Y F A N O N / S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U I N P U T V O L / A D J .
64 Maintenance If there is some prob lem inside the projector , the indicators light up or b link. T rouble indications Indicator TEMP LAMP ON FA N TEMP LAMP ON BUSY F AN TEMP LAMP ON BUSY F AN TEMP L.
Maintenance 65 Air filter cleaning CAUTION If you use the projector mounted on the ceiling, ask the dealer to carr y out the maintenance such as cleaning. The filter inside the air filter cov er is the par t to shut out dusts or dregs. Do not use the projector with the filter tak en off .
66 Maintenance Air filter cleaning (continued) Assemble the air filter . Place the air filter in the air filter cov er , then inser t the f our tabs on the filter frame into the holes in the air filter cov er .
Maintenance 67 Cleaning the lens • Use a blo wer or a lens cleaner to clean the lens. • Ne v er rub or tap the lens with a hard object as the lens surf ace is fragile. Lens and main unit cleaning Cleaning the main unit • Pull out the power cord bef ore cleaning.
68 Maintenance Lamp replacement The lamp will e ventually begin to project dark or dull pictures and finally will not light up . (Lamp ’ s lif e length depends on the use condition.
Maintenance 69 Notes • When the CALL button is pressed, the “ Lamp time ” (the approximate amount of time the lamp has been used) is displa yed. 35 • The lamp should be replaced if the total working time e xceeds about 1,000 hours. When the “ Lamp time ” is displa yed 1000 hours, the icon and a message appear .
70 Others Before calling service personal Symptom The power does not come on. The power turns off while using the projector . No image appears. No sound is heard. Desired input source cannot be selected by the INPUT button. Computer input or Y/P B /P R input colors are not right.
71 Others 71 Symptom The color is faint. The tint is not good. The remote control does not work . Cause • The “ Color ” , “ Tint ” , “ R-Le vel ” , “ G-Level ” or “ B-Le vel ” adjustments are not correct. • The lamp life is ending.
72 Others Mini D-sub 15pin connector Pin assignment of COMPONENT IN connector Input signal • Y/P B /P R input Y signal: 1.0V(p-p) 75 Ω P B , P R signal: 0.7V(p-p) 75 Ω • Computer input R, G, B signal: 0.7V(p-p) 75 Ω H.sync signal: TTL level (positive/negative polarity) V .
73 Others 73 TEXT70 640 x 350 50 640 14 96 800 31.469 70.086 25.175 59 350 38 2 449 TEXT70 640 x 400 50 640 14 96 800 31.469 70.086 25.175 34 400 13 2 449 TEXT85 640 x 350 96 640 32 64 832 37.861 85.080 31.500 60 350 32 3 445 TEXT85 640 x 400 96 640 32 64 832 37.
74 Others Applicable signal (continued) Timing char t (Continued) *SXGA1152x864 75Hz 1152 x 864 256 1152 64 128 1600 67.500 75.000 108.000 32 864 1 3 900 *SXGA1280x960 60Hz 1280 x 960 312 1280 96 112 1800 60.000 60.000 108.000 36 960 1 3 1000 *SXGA1280x960 85Hz 1280 x 960 224 1280 64 160 1728 85.
75 Others 75 Controlling the projector by using RS-232C Y ou can also control the projector by entering the command from a computer via RS-232C . Command list RS-232C 9600 bps, No parity , Data length: 8 bit, Stop bit: 1 bit STX (02h) Command (3Byte) ETX (03h) One command only can be used in one communication.
76 Others Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Picture P osition H-position V -position Picture mode Bright (Computer) T rue color Picture mode Standard (Component, Video , Cinema S-Video) Spor ts Video mode A uto .
77 Others 77 Controlling the projector by using RS-232C (continued) Continued Classification Items/Status A udio Speaker output On Off Channel select (RCA) L+R L R Loudness (RCA) Off On Channel select.
78 Others Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Displa y Menu bac kground translucent On Off Star t-up screen On Off Def ault Input source settin.
79 Others 79 Controlling the projector by using RS-232C (continued) Classification Items/Status V olume Increase Decrease Input select T oggle COMPONENT VIDEO S-VIDEO RESIZE Increase the enlargement r.
80 Others T rademarks NEC , PC-98 series are trademarks of NEC Cor poration. V GA, SVGA, XGA, SXGA, UXGA are tr ademar ks or registered trademarks of Inter national Business Machines Corporation. Macintosh is a registered trademark of Apple Computer , Inc.
An important point after buying a device Toshiba TLP-MT7E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba TLP-MT7E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba TLP-MT7E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba TLP-MT7E you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba TLP-MT7E will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba TLP-MT7E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba TLP-MT7E.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba TLP-MT7E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba TLP-MT7E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
