Instruction/ maintenance manual of the product CT100 Behringer
Go to page of 6
CABLE TESTER CT100 Version 1.0 April 2001 Users Manual ENGLISH www.behringer.com.
CABLE TESTER CT100 2 1 . INTRODUCTION Congratulations! With the CT100, you have purchased an indispen- sable tool that enables you to easily check the most common cables used by musicians and sound engineers. Faulty cables are a common cause of failure in live and studio situations.
CABLE TESTER CT100 3 3 . INSTALLED CABLE TESTER MODE This mode enables you to test cables in fixed installations or situations that dont allow you to connect both ends of the cable to the CT100. + Hold down the RESET button while moving the ON switch to the CABLE TESTER position.
CABLE TESTER CT100 4 TEST TONE MODE may be used to check signal flow and to facilitate level adjustments. It routes a test tone to the + pin (pin 2/tip) of all OUT jacks. Use the TEST TONE LEVEL switch to choose between +4 dBu, -10 dBV, or -50 dBV mic level.
CABLE TESTER CT100 5 XLR connectors (pin numbers visible on connectors) RCA connector 7. WARRANTY For our current warranty terms, please refer to our website at http://www.behringer.com, or send us a request via e-mail at support@behringer.de, fax at +49 2154 920 665, or telephone at +49 2154 920 666.
CABLE TESTER CT100 6 The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or me.
An important point after buying a device Behringer CT100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer CT100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer CT100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer CT100 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer CT100 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer CT100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer CT100.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer CT100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer CT100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center