Instruction/ maintenance manual of the product SD-R1102 Toshiba
Go to page of 16
CD-R W/D VD-R OM DRIVE SD-R1102 Installation Instructions with V OB InstantCD/D VD and CyberLink P owerD VD TM Software VERSION 1.0 APRIL 2001 TOSHIBA Storage Device Division.
.
CD-R W/D VD-R OM DRIVE Instruction Instructions For the follo wing Driv e : SD-R1102 TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC. STORAGE DEVICE DIVISION 35 Hammond Irvine, CA 92618 Contents of this manual are subject to change without prior notice. © 2001 TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC.
Y ou hav e just purchased one of the most advanced storage technologies a vailable. As with any new technology , you must r ead, and f ollow all set-up and usage instructions in the applicable user guides and/or manuals en- closed.
6. DO NOT use this Equipment in any system, such as medical equipment, where personal injury or property damages could result fr om the Equipment’ s malfunction, unexpected data corruption, or data error in the reading operation. 7. When a disc cannot be ejected for some reason, you can use the ‘emergency eject’ mechanism.
T able of Contents Checking your Kit Packaging ...................................................................... 1 System Requirements .................................................................................... 1 Setting Jumpers ........
Congratulations on your purc hase of a T oshiba CD-R W/D VD-ROM dri ve and Kit. The following information will help you in the simple installation of your new CD-R W/D VD-ROM dr iv e.
2 The following steps must be performed to properly install your CD-R W/DVD- R OM. ● Set dri ve’ s jumpers ● Connect audio cable ● Attach IDE BUS cable ● Connect power cable ● Mount CD-R W.
1. Remove computer cover and faceplate if required (refer to your computer system’ s man ual for remov al information). 2. If the CD-R W/D VD-R OM is replacing a CD-ROM, disconnect all connector s and remov e the CD-R OM presently installed in your system.
4 Connect secondary IDE BUS cable to CD-R W/D VD-ROM dri ve, assuring that pin 1 of the cable (side with red stripe) is connected to pin 1 on the drive. • If the CD-RW/D VD-R OM is the only drive connected on the secondary IDE BUS cable: connect drive to the last set of pins on IDE BUS cable.
COMPLETING INST ALLA TION After you hav e connected all the necessary cables, push the CD-R W/D VD-R OM completely into the computer’ s drive slot. Mount the dri ve per your computer’ s instructions using the screws included in your kit. If you are using other screws, assure that the screw length does not exceed 3±0.
CyberLink P o werD VD ™ : CyberLink PowerD VD ™ is a high-quality , pur e-software DVD play er that brings high-quality movies and karaok e into your multimedia PC. Y ou can playback high resolution D VD titles or MPEG-2 files with superb MPEG-2 video and Dolby A C-3 audio quality .
TECHNICAL SUPPORT T echnical suppor t can be obtained by calling 949/455-0407 or by sending an email to: toshibadpd@teleplan-ventura.com or visiting our website at: http://www .
WARRANTY INFORMA TION T oshiba America Electronic Components, Inc. (“T AEC”) warrants that all prod- ucts will, upon deliv ery by T AEC to the customer in ne w condition, be free from defects in material and workmanship for a period of twelve (12) months after deli very .
.
460018-C0 P/N 460021-A0.
An important point after buying a device Toshiba SD-R1102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba SD-R1102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba SD-R1102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba SD-R1102 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba SD-R1102 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba SD-R1102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba SD-R1102.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba SD-R1102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba SD-R1102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
