Instruction/ maintenance manual of the product Satellite A350D Toshiba
Go to page of 297
Toshiba Personal Computer Satellite A350D Maintenance Manual TOSHIBA CORPORATION [CONFIDENTIAL].
ii [CONFIDENTIAL] Satellite A350D Series Maintenance Manual Copyright © 2008 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein.
Satellite A350D Series Maintenance Manual [CONFIDENTIAL] iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite A350D, referred to as the A355D Series in this manual.
iv [CONFIDENTIAL] Satellite A350D Series Maintenance Manual The manual is divided into the following parts: Chapter 1 Hardware Overview describes the A355D Series system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
Satellite A350D Series Maintenance Manual [CONFIDENTIAL] v Some operations require you to simultaneously use two or m ore keys. We identify such operations by the key top symbols separated by a plus (+) sign. For example, Ctrl + Pause (Break) means you must hold down Ctrl and at the same tim e press Pause (Break) .
vi [CONFIDENTIAL] Satellite A350D Series Maintenance Manual Table of Contents Chapter 1 Hardware Overview 1.1 Features ............................................................................. Error! Bookmark not defined. 1.2 2.5-inch HDD ........
Satellite A350D Series Maintenance Manual [CONFIDENTIAL] vii 2.31 LAN Troubleshooting ............................... …………………………………………….. .72 Chapter 3 Tests and Diagnostics 3.1 The Diagnostic Test ...................
viii [CONFIDENTIAL] Satellite A350D Series Maintenance Manual Tools and Equipment ......................................................... Error! Bookmark not defined. Screw Tightening Torque .................................................. Error! Bookmark not defined.
Satellite A350D Series Maintenance Manual [CONFIDENTIAL] ix Removing the Speakers ...................................................... Error! Bookmark not defined. Installing the Speakers ....................................................... Error! Bookmark not defined.
x [CONFIDENTIAL] Satellite A350D Series Maintenance Manual 4.22 CMOS Board and MIC...................................................... Error! Bookmark not defined. Removing the CMOS Board and MIC .............................. Error! Bookmark not defined.
Satellite A350D Series Maintenance Manual [CONFIDENTIAL] xi Figures Figure 4.1 Removing the Battery Pack ................................... Error! Bookmark not defined. Figure 4.2 Removing the main HDD door .............................. Error! Bookmark not defined.
xii [CONFIDENTIAL] Satellite A350D Series Maintenance Manual Figure 4.28 Removing the VGA Board .................................... Error! Bookmark not defined. Figure 4.29 Removing the spring screws .................................. Error! Bookmark not defined.
Satellite A350D Series Maintenance Manual [CONFIDENTIAL] xiii.
Chapter 1 Hardware Overview.
1 Hardware Overview Satellite A350D Main tenance Manual 1-ii Chapter 1 Contents 1.1 Features .................................................................................................................. 1-1 1.2 2.5-inch HDD ......................
1 Hardware Overview Satellite A350D Main tenance Manual 1-iii Figures Figure 1-1A ID Parts Description Placement Part A.......................................................... 1-7 Figure 1-2 SATA HDD .................................................
.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview Satellite A350D Maintenance Manual 1-1 1.1 Features The Toshiba Satellite A350/A350D is a full size notebook PC based on the Dual Core Processor, providing high-speed processing capabilities and advanced features.
1 Hardware Overview Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 1-2 ODD (BTO) y 12.7mm height DVD Super Multi drive supporting ±R Double Layer y 12.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview Satellite A350D Maintenance Manual 1-3 function. eSATA It’s called external SATA or eSATA, end user can now utilize shielded cable lengths up to 2 meters outside the PC to take advantage of the benefits the SATA interface brings to storage.
1 Hardware Overview Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 1-4 Headphones/S/PDIF/Line out Jack This jack connects digital speakers or a stereo headphone (16 ohm minim um). When connected to a digital speaker or headphones, the internal speaker is automatically disabled.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview Satellite A350D Maintenance Manual 1-5 Wireless USB Some computers in this series are equipped with a W ireless USB card that is compatible with other Wireless USB devices based on the IEEE 802.
1 Hardware Overview Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 1-6 against the fingerprint sensor. This finger print sensor is located at the center of the Touch Pad panel and is Authentec AES1610.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview Figure 1-1A ID Parts Description Placement Part A Satellite A350D Maintenance Manual 1-7.
1 Hardware Overview Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 1-8.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview Satellite A350D Maintenance Manual 1-9 The system unit of the computer consists of the following com ponents: Processor (BTO) The computer is equipped with one of the following Intel ® processors.
1 Hardware Overview Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 1-10 Graphics Controller AMD M780G/M780V as integrated graphics solution Followin.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview 1.2 2.5-inch HDD The computer contains an extremely low-prof ile and lightweight, high-performance HDD. The HDD incorporates 9.5 mm / 12.5 m m height magnetic disk and m ini-Winchester type magnetic heads.
1 Hardware Overview Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 1-12 Item Specifications Capacity (GB) 400 GB 500 GB 500 GB Rotational Speed (RPM) 4200 RPM 4200 RPM 5400 RPM Height 12.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview 1.3 DVD Super Multi (+-R Double Layer) The DVD Super Multi drive accepts 12-cm (4.
1 Hardware Overview Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 1-14 1.4 Power Supply The power supply unit provides constant voltage 19V for the system board and performs the following functions: 1. Power input monitor y Checks whether the AC adapter (DC power supply) is connected to the computer.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview Satellite A350D Maintenance Manual 1-15 6. Output monitor y Monitors the voltage output to the system block (load/logic circuit side). y Monitors the voltage, over voltage, input/output current of the battery pack.
1 Hardware Overview Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 1-16 1.5 Batteries The computer has the following two types of batteries: Main Battery Pack Real Time Clock (RTC) Battery 1.
Error! Style not defined. Error! Style not defined. 1 Hardware Overview Satellite A350D Maintenance Manual 1-17 NOTE: The time required for normal charge depends on the power consumption by the system. Using the fluorescent lamp and frequently accessing the disk consume much power and lengthen the charge time.
Chapter 2 Troubleshooting Procedures 2.
.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 1 Chapter 2 Contents 2.1 Troubleshooting Introduction ..........................................................................................
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 2 2.30 LAN troubleshooting .................
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 3 Figure Figure 2-1 Troubl eshooting Flowchart(1/2) ….…………………………………………..5 Figure 2-1 Tr oubleshooting Flowchart(2/2)….
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 4 Tables Table 2-1 Battery LED ....................................................................................................... 11 Table 2-2 DC-IN LED .
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 5 7. Cleaning kit for floppy disk drive troubleshooting 8. Cleaning kit for optical drive troubleshooting 9. Multimeter 10. External monitor 11.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 6 STA R T C onne ct t h e A C ada pt er t o t he D C - I N sock et I s t h e DC- I N L E D o .
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 7 A Does ty ped characters appear corre ctly? Insert the diagnostics disk into the FDD.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 8 If the diagnostics program cannot detect an erro r, the problem may be intermittent. The test program should be executed several times to isol ate the problem.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 9 Other problems that are not covered by the di agnostics program may be discovered by a user. 1. If an error is detected when using an ex ternal USB device, perform the External USB Devices Troubleshooting pr ocedures in Section 2.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 10 2.3 Power Supply Troubleshooting ST AR T Are the D C - IN and B att er y L E D s lit? Can .
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 11 The power supply controls many functions and components. To determ ine if the power supply is functioning properly, star t with Procedure 1 and continue with the other Procedures as instructed.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 12 Table 2-2 DC-IN LED AC-IN LED Power supply status Solid on AC power exists (LED is solid White).
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 13 Procedure 3 Pow er supply connection check The power supply wiring diagram is shown below: AC adaptor Sys t em boar d B a tte ry A C adaptor cord AC p o we r c o r d Any of the connectors may be disconnected.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 14 Procedure 4 Diagnostic check The power supply may not charge the battery pack. Perform the following procedures: 1. Reinstall the battery pack.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 15 2.4 Display Troubleshooting Per f or m ext er nal di spl ay che ck ( P r ocedur e 1) STA R.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 16 This section describes how to determ ine if th e computer’s display is functioning properly. The process is outlined in Figure 2-3. Start wi th Procedure 1 and continue with the other procedures as instructed.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 17 Procedure 3 Connector and replacement check The FL inverter board, LCD module, and system board are connected to the display circuits. Any of these components may be dam aged.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 18 2.5 Keyboar d Troubleshooting Per f or m ext er nal keyboa rd c hec k ( Proc edur e 1) STA.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 19 Figure 2-4 Keyboard troubleshooting process.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 20 To determine if the computer’s keyboard is functioning properly, perform the following procedures. Figure 2-4 outlines the p rocess. St art with Procedure 1 and continue with the other procedures as instructed.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 21 Check 3 The system board may be dam aged.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 22 R epl ace syst em board (P ro ce du re 2 ) EN D O r ig in al U S B devi ce i s f aul t y P.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 23 To determine if the computer’s external US B devices are functioning properly, perform the following procedures. Figure 2-5 outlines the process.
2 Troubleshooting Procedures Satellite A350D/A355D, SA TEGO A350D, EQUIUM A350D Series Maintenance Manual 24 2.7 Touchpad Troubleshooting START END To uchP a d co nnect i o n check (Procedure 1) Touch.
2 Troubleshooting Procedures Satellite A350D/A355D, SA TEGO A350D, EQUIUM A350D Series Maintenance Manual 25 To determine if the computer’s built-in T ouchPad is functioning properly, perform the following procedures. Figure 2-9 outlines the proce ss.
2 Troubleshooting Procedures Satellite A350D/A355D, SA TEGO A350D, EQUIUM A350D Series Maintenance Manual 26 2.8 UWB Troubleshooting P e r f o r m UW B An t e n na conne ct i on chec k ( P rocedu r e .
2 Troubleshooting Procedures Satellite A350D/A355D, SA TEGO A350D, EQUIUM A350D Series Maintenance Manual 27 To determine if the computer’s UW B is functioning properly, perform the following procedures. Figure 2-7 outlines the p rocess. Start with Procedure 1 and co ntinue as instructed.
2 Troubleshooting Procedures Satellite A350D/A355D, SA TEGO A350D, EQUIUM A350D Series Maintenance Manual 28 Module does not work the system board may be damaged.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 29 2.9 Speaker Troubleshooting.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 30 START Do al l sour ces ha ve sam e problem? END Per form ea rpho ne te st (Procedure 2 ) D.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 31 To determine if the computer’s built-in sp eakers are functioning properly, perform the following procedures. Figure 2-8 outlines the pro cess.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 32.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 33 2.10 Optical drive troubleshooting START Audio CD fu nctions ok? END Perform softw are che.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 34 Figure 2-9 Optical drive troubleshooting process This section describes how to determ ine if the computer’s internal optic al drive is functioning properly.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 35 Procedure 4 Diagnostic test The audio test program stored in the Diagnostics Disk will test th e drive’s ability to p lay an audio CD. See Chapter 3 for details.
2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 36 Procedure 5 Connectio n check and replacement check The optical drive connects to the system board. The drive may be disconnected, or the drive or system board may be dam aged.
37 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 37.
38 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 38 2.11 Modem Troubleshooting ST ART Com puter un able to detect t eleph one si gnal ? END.
39 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 39 This section describes how to determine if the computer' s modem is functioning properly. Figure 2-10 outlines the process. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required.
40 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 40.
41 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 41 2.12 Express card Troubleshooting START D o er r or s oc cur dur i ng E x p ress ca rd .
42 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 42 This section describes how to determ ine if th e Express card player is functioning properly.
43 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 43.
44 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 44 2.13 IEEE 1394 Troubleshooting.
45 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 45 START Perf orm IEEE 1394 devi ce chec k (Pro ce du re 1 ) I s I EEE 1 39 4 t r a ns mi .
46 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 46 To determine if the computer’s IEEE 1394 system is functioning properly, perform the following procedures. Figure 2-12 outlines the p rocess.
47 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 47 Check 4 The system board may be dam aged.
48 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 48 2.14 Wireless LAN Troubleshooting.
49 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 49 START Perfo rm diagn o stic test (Proc ed ure 1) W as a w ireless L A N p rob lem d ele.
50 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 50 The wireless LAN antenna wire, wireless LAN un it or system board may each be th e source of a wireless LAN fault. Any of these com ponents may be dam aged.
51 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 51 Procedures . If the problem persists, or if th e wireless LAN LED is not light when the wireless communication switch is turned to “On”, go to Check 3.
52 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 52 2.15 Camera Troubleshooting Figure 2-14 Camera troubleshooting process.
53 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 53 The Camera board or system board may be the reason of a Cam era fault. Either of these two components may be damaged. To determine if the com puter’s Camera is functioning properly, perform the following procedures.
54 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 54.
55 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 55 2.16 Bluetooth Troubleshooting Figure 2-15 Bluetooth troubleshooting process.
56 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 56 The Bluetooth antenna wire, Bluetooth module or system board may be the reason of a Bluetooth fault. Any of these components may be dam aged.
57 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 57 Check 3 The Bluetooth module may be damaged. Replace it with a n ew one following the instructions in Chapter 4. If the problem still exists, perform Check 4.
58 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 58 2.17 Bridge Media assemble Troubleshooting.
59 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 59 START Do errors oc cur during Bridge me dia ass emble test? Perform Bridge m edia assemb le socket replacement check (Procedure 2) Replac e system board END Bridge media assemble unit is no t faulty.
60 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 60 This section describes how to determine if the Bridge media assem ble card player is functioning properly. The process is summarized in Figure 2-16.
61 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 61.
62 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 62 2.18 HDD Troubleshooting Figure 2-17 HDD troubleshooting process.
63 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 63 The HDD or system board may be the reason of a HDD fault. Either of these two components may be damaged. To determine if the comput er’s HDD is functioning properly, perform the following procedures.
64 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 64.
65 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 65 2.19 CRT Troubleshooting P e r f orm C R T c o nne c t ion ch e ck ( Pr oce dure 1) ST .
66 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 66 Figure 2-18 CRT Troubleshooting Process To determine if the computer’s CRT port is functioning properly, perform the following procedures.
67 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 67.
68 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 68 2.20 HDMI Troubleshooting Per f or m H D M I connec t i on check ( P r ocedur e 1) STA .
69 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 69 Figure 2-19 HDMI troubleshooting process To determine if the computer’s HDMI port is functioning properly, perform the following procedures.
70 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 70 2.21 SPDIF troubleshooting.
71 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 71.
72 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 72 Figure 2-20 SPDIF troubleshooting process The system board may be the reason of a SPDIF fault. The connector of system board may be damaged.
73 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 73 2.22 MIC Troubleshooting Figure 2-21 MIC troubleshooting process.
74 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 74 The MIC line or system board may be the re ason of a MIC fault. Either of these two components may be damaged. To determine if the computer’s MIC is functioning properly, perform the following pr ocedures.
75 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 75 Figure 2-22 Finger printer troubleshooting process.
76 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 76 The Finger printer board or system board may be the reason of a finger prin ter fault.
77 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 77.
78 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 78 2.24 FM tuner Failure Troubleshooting Per f orm FM T une r A nt enna conne ct i on chec.
79 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 79 Figure 2-23 FM tuner troubleshooting process.
80 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 80 A R eplace syst em b oard EN D D oes r ep l acem ent F M T u ner B oar d f unct i on pr.
81 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 81 To determine if the computer’s FM tuner por t is functioning properly, perform the following procedures. Figure 2-23 outlines the process.
82 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 82 Check 2 Try connecting a different FM Tuner board to the computer. If the replacem ent FM Tuner board works, the original FM Tuner Board may be damaged.
83 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 83 2.25 E-SATA Troubleshooting.
84 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 84 START Pe rform E-S A T A dev ice c hec k (Pro ced ure 1) I s E-SATA t r an s mis s i on.
85 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 85 To determine if the computer’s E-SATA sy stem is functioning properly, perform the following procedures. Figure 2-24 outlines the p rocess.
86 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 86 Check 4 The system board may be dam aged.
87 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 87 To determine if the computer’s built-in Sens or button is functioning properly, perform the following procedures. Figure 2-25 outlines the p rocess.
88 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 88 2.27 LED troubleshooting STA R T EN D R epl ace syst em bo ar d Figure 2-26 LED troubleshooting process To determine if the computer’s built-in LED is functioning properly, perform the following procedures.
89 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 89 2.28 Thermal Module troubleshooting START END CPU replacement check (Procedure 1) Therm.
90 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 90 To determine if the computer’s built-in Ther m al Module is functioning properly, perform the following procedures. Figure 2-27 outlines the p rocess.
91 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 91.
92 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 92 2.29 TV-out troubleshooting P er f o r m T V cab l e co n n ect i o n ch eck ( P r o ce.
93 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 93 Figure 2-28 TV- out troubleshooting process To determine if the computer’s TV port is functioning properly, perform the following procedures.
94 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 94 2.30 LAN troubleshooting P e r f or m L A N c a bl e c onnec t i on che c k ( P r oce d.
95 2 Troubleshooting Procedures Satellite A350D/A355D, SATE GO A350D, EQUIUM A350D Se ries Maintenance Manual 95 Figure 2-29 LAN troubleshooting process To determine if the computer’s built-in L AN is functioning properly, perform the following procedures.
3. Tests and Diagnostics 1 Chapter 3 Tests and Diagnostics.
3. Tests and Diagnostics 2 Contents 3.1 The Diagnostic Test ........................................................................................................ .......... 4 3.2 Executing the Diagnostic Test........................................
3. Tests and Diagnostics 3 3.19 1 st HDD Test ...................................................................................................................... ... 30 3.20 2 nd HDD Test ............................................................
3. Tests and Diagnostics 4 3.1 The Diagnostic Test This chapter explains how to use the Test & Diagnostic program to test the functions of the (Base on Los Angeles 10A+/10AG+ T&D version 1.0) hardware modules. The Test & Diagnostic Program is stored on the T&D diskettes.
3. Tests and Diagnostics 5 3.2 Executing the Diagnostic Test DOS is required to run the DIAGNOSTICS PROGRAM. To start the DIAGNOSTIC PROGRAM, follow these steps: 1. Insert the diagnostics diskette #1 in the floppy disk drive and turn on the computer. (The diagnostics diskette contains the DOS boot files.
3. Tests and Diagnostics 6 The below display will show up at the beginning of T&D program If the test result passes, the following display will show up:.
3. Tests and Diagnostics 7 If an error is detected and a test fails, the following message displays: Then press any key for next actions – the below display presented if copying test log file onto diskette is necessary. This action will be executed when “ Y ” key pressed.
3. Tests and Diagnostics 8 And then it will check if it’s necessary to leave this program. Program will quit when “ Y ” key pressed and it will go back main menu f or next test if “ N ” key pressed.
3.3 Display configuration 3 Tests and Diagnostics 9 3.3 Display Configuration This Item will show the unit configuration. It includes: CPU (CPU type) DDRAM SIZE Panel ID HDD1 type & capacity (Vendor ID. M odel .Firmware) HDD2 type & capacity (Vendor ID.
3. Tests and Diagnostics 3.5 Speaker Audio Test 10 3.4 Beep sound Test The beep sound test allows the user to aurally confirm the speaker functions. And check both speakers if they are OK within 3 times “Beep” sound generated. NOTE : Remember to tune up the volume as “ Maximum ” before this test starts.
3.6 Fan ON/OFF Test 3. Tests and Diagnostics 11 listen the rotating sound to check whether the fan is working or not. NOTE : Remember to approach fan outlet that is near right side of unit whether fan is “ON”. The computer will stop the fan working after any key pressed.
3. Tests and Diagnostics 3.7 Main Battery Change Test 12 3.6 Main Battery Charge Test NOTE : The AC adaptor should be connected to successfully run this test 1.
3. Tests and Diagnostics 13 3. 7 FDD Test NOTE : Before running the FDD test, prepare a formatted work diskette (1.44 MB). Remove the diagnostics diskette and insert the work diskette into the FDD. The contents of the floppy diskette maybe erased. The Floppy Disk Test includes three subtests of the: 1.
3 Tests and Diagnostics 14.
3. Tests and Diagnostics 15 3.8 Memory check This test will check if the computer’s Mem ory Frequency and Size is correct in every slot. 3. 9 Keyboard Test The keyboard test checks the all keys function. NOTE: The Num Lock and the Overlay mode must be off to execute the keyboard test.
3 Tests and Diagnostics 16 pressed, the corresponding key on the screen changes to black as shown below. It will indicate whether the sub test is passed or failed after the question.
3. Tests and Diagnostics 17 NOTE: The “ Fn ” key cannot be tested in the keyboard test. To determine whether the “ Fn ” key is working correctly, press “ Fn+F6 ” or “ Fn + F7 ” keys to check if LCD display brightness change gradually. 3.
3. Tests and Diagnostics 18 the “OK” column will end this test. It will indicate whether the subtests pass or fail after three questions. NOTE: The above figure has three compartments although the Touch Pad installed may only have two buttons. In this case, the central compartment in the figure does not correspond to any button.
3. Tests and Diagnostics 19 3.12 Magnetic Switch Test The lid switch test checks the lid function of the unit. When LCD cover closed, the lid should enable to turn off the display. Follow below steps to run this test: 1. Close the LCD cover. 2. Open the LCD.
3. Tests and Diagnostics 20 2>. If the Lid switch test pass, it will show below display:.
3. Tests and Diagnostics 21 3.13 LAN Test The LAN test checks the LAN full-duplex environment. NOTE: LAN loopback needs to plug in before test begins. And LAN information will show on the test screen: IO Base – Port: A000H IRQ – BH, it’s “IRQ B”.
3. Tests and Diagnostics 22 The LAN test includes three subtests of the: 1. Speed1000 2. Speed100 3. Speed10 The subtests run automatically. The screen should display as below, indicating whether the subtests pass or fail when finished.
3. Tests and Diagnostics 23 If an error is detected and a test fails, the following message displays:.
3. Tests and Diagnostics 24 3.14 RTC Test Checks the computer’s RTC (Real Time Clock) and calendar functions by com paring the DOS and CMOS values. The test runs automatically. The screen should display as below, indicating whether the test is passed or failed when finished.
3. Tests and Diagnostics 25 3.15 Read 1394 GUID This test will check if the computer’s EEPROM 1394GUID code is correct. NOTE: Must open the RAM Door to see RAM connector GUID bar code before test item begins.
3. Tests and Diagnostics 26 3.16 Speaker EQ(Equalizer Quality factor) Ty pe Check&Re-Write This test will check if the computer’s EEPROM EQ type is correct. The EQ Type test includes two subtests of the: 1. Read EQ Type from EEPROM 2. Re-Write EQ Type to EEPROM NOTE : To execute this test, you must select speaker type (Harman or No brand).
3. Tests and Diagnostics 2 7 Press each of the buttons on the front panel in turn. A yellow bar will appear on the relevant section of the figure if the button passes the test.
3. Tests and Diagnostics 28 Please check the units whether have the Front Edge Logo: If have the logo, please key 1 to set the Front Edge Logo. If not have the logo, please key 2 to disable the Front Edge Logo. Please read the notice to check the function is enabling or be disable in BIOS setup menu.
3. Tests and Diagnostics 29 2. If we select “1” to enable the Front Edge logo function by program, There have the item of Illumination LED in BIOS Menu. 2.1 Select enable to let the Front Edge logo item in enable mode (show as below picture), and then restart the machine, the Front Edge Logo Led will be light.
3. Tests and Diagnostics 30 3.19 1 st HDD Test The HDD test allows the user to verify the 1 st HDD ok or not. First, please select HDD test method, Screen would display as below: After you select the .
3. Tests and Diagnostics 31 If input password is wrong, the screen would display as below: The screen will display as below picture to show the subtest is passed or failed when finished: If it is show.
3. Tests and Diagnostics 32 If the picture shows as below, it means he HDD function is NG 3.20 2 nd HDD Test The HDD test allows the user to verify the 2 nd HDD ok or not.
3. Tests and Diagnostics 33 After you select the method, then input password: “hard disk”, if input password is Right, the screen would display as below: If input password is wrong, the screen wou.
3. Tests and Diagnostics 34 The screen will display as below picture to show the subtest is passed or failed when finished: If it is show the picture as below, it means HDD function is OK If the pictu.
3. Tests and Diagnostics 35 3.21 Read DMI Compal write Toshiba Part No (version), Toshiba Serial No (Serial No), Product Name, OEM string and UUID , If you want to double check the DMI data, please se.
3. Tests and Diagnostics 36 3.22 Write DMI When you want to write DMI data, please select which data you want to write, the figure below will be displayed: 1.
3. Tests and Diagnostics 37 After write OK, you should reboot the system that can make the setting effective, or you can write next data before reboot system, the figure below will displayed:.
3. Tests and Diagnostics 38 NOTE : should input correct DMI data, and should reboot the system that can make the setting effective. 3.23 Memory R/W test This item will do Memory Read& W r ite test.
3. Tests and Diagnostics 39.
3. Tests and Diagnostics 40 If an error is detected and a test fails, the following message displays:.
Chapter 4 Replacement Procedures.
4 Replacement Procedures Satellite A350D Main tenance Manual 4-ii Chapter 4 Contents 4.1 General ................................................................................................................... 4-1 Safety Precautions ...............
4 Replacement Procedures Satellite A350D Main tenance Manual 4-iii Installing the keyboard Cover and Keyboard............................................... 4-25 4.9 Logic Upper Assembly.................................................................
4 Replacement Procedures Satellite A350D Main tenance Manual 4-iv Installing the Display Assembly .................................................................. 4-49 4.20 LCD Bezel Assembly .........................................................
4 Replacement Procedures Satellite A350D Main tenance Manual 4-v Figures Figure 4.1 Removing the Battery Pack ................................................................................. 4-8 Figure 4.2 Removing the main HDD door .................
4 Replacement Procedures Satellite A350D Main tenance Manual 4-vi Figure 4.31 Removing the Thermal Module spring screws .................................................. 4-44 Figure 4.32 Removing the CPU ..............................................
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.1 General This chapter explains how to disassemble the laptop and replace Field Replaceable Units (FRUs). Some replacement procedures m ay not require you to remove all the surrounding FRUs to replace only one FRU.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Satellite A350D Main tenance Manual 4-2 Safety Precautions Before you begin disassembly read the following safety precautions carefully. Be sure to follow them while you are working.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Main tenance Manual 4-3 CAUTION: 1. Before replacing a component, make sure that the replacement component meets the required specifications. To avoid laptop failures, never use components that do not meet the specifications.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Satellite A350D Main tenance Manual 4-4 Before You Begin Before you begin to disassemble the laptop, keep in mind the precautions and advice in this section. Always begin disassembly by removing the AC adapter and battery pack.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Main tenance Manual 4-5 Disassembly Procedures The cable connectors come in these two basic types: Pres.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Satellite A350D Main tenance Manual 4-6 Tools and Equipment For your safety and that of other people in the working environment, it is strongly recomm ended that you use electrostatic discharge (ESD) equipment.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Main tenance Manual 4-7 Colors of Screw Shanks For easy identification of the correct screws, the screw sha.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.2 Battery Removing the Battery Pack Remove the battery pack according to the following procedures and Figure 4.1. CAUTION: When handling the battery packs, use care not to short circuit the terminals.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Main tenance Manual 4-9 Installing the Battery Pack Install the battery pack according to the following procedures. CAUTION: The battery packs contain a lithium ion battery, which can explode due to improper replacement, use, handling, or disposal.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.3 HDD Removing the HDD CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive. There are two HDD equipped in the laptop.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 2. Remove the HDD pack by pulling on the tab attached to the pack. NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. M2.5X4 ＊ 2 Figure 4 . 4 Removing the 2 nd HDD door 7. Place the HDD pack on a flat surface such as a desk. 8. To separate the plate from the HDD, remove four M3x3 screws and separate the two HDD brackets from left and right side.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-13 Installing the HDD Install the HDD according to the following procedures. CAUTION: To avoid damage, always hold the HDD only by its sides.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.4 Memory Removing the Optional Memory Remove the optional mem ory according to the following procedures and Figure 4.6 after checking that the laptop is turned off. CAUTION: Remove the optional memory after turning off the laptop.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4. Spread out the two memory lock latches so that the m emory pops up. Figure 4 . 7 Removing the RAM from connector 5. Pull the memory up and out at an angle, using care to avoid touching the connectors.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 4-16 Installing the Optional Memory Install the optional memory according to the following procedures after checking that the laptop is turned off.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.5 WLAN Card Removing the WLAN Card Remove the WLAN card according to the following procedures and Figure 4.8. 1. Detach the two antennas on the WLAN card. 2. Remove two M2.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.6 Modem Card / FM Tuner Removing the Modem Card Remove the modem card according to the following procedures and Figure 4.9. 1. Remove two M2.5x3 screws that secure the modem card.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Figure 4 . 10 Removing the FM Tuner Installing the Modem Card Install the modem card according to the following procedures. 1. Attach the cable to the back of the modem card.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.7 ODD Removing the ODD Bay Module NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bay. See the appropriate sections for the disassembly procedures of specific modules.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-21 Installing the ODD Bay Module Install the ODD bay module according to the following procedures. 1. Place the ODD bay module in the correct position and slide it in.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Disassembling the ODD Drive NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails. Disassemble the ODD drive according to the following procedures and Figure 4.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.8 Keyboard Cover and Key board Removing the Keyboard Cover and Keyboard Remove the Keyboard Cover and Keyboard according to the following procedures and Figure 4.13, 4.14, 4.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 3. Remove two M2.0x3 screws. Figure 4 . 14 Removing screws from the keyboard 4. Lift the keyboard up and detach the cable on the back of the keyboard from the motherboard. Figure 4 .
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-25 Installing the keyboard Cover and Keyboard Install the keyboard cover and keyboard according to the following procedures.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.9 Logic Upper Assembly Removing the Logic Upper Assembly Remove the logic upper assembly according to the following procedures and Figure 4.16, 4.17 and 4.18. 1. Turn the laptop upside down and remove the following 19 screws: − Sixteen M2.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 2. Turn to the front and remove five 2.5x10 screws. M2.5X10 ＊ 5 Figure 4 .
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 3. Detach one Power board FFC, one Control Panel FFC, two Speaker cables, one Fingerprinter FFC, one LED Board cable and one TouchPad cable as shown in Figure 4.18. Figure 4 .
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.10 Power Board Removing the Power Board Remove the power board according to the following procedures and Figure 4.19. 1. Remove one M2.5x4 screw from the power board. 2. Separate the power board from the logic upper assembly.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.11 Speakers Removing the Speakers Remove the Speakers according to the following procedures and Figure 4.20. 1. Press speaker and then remove four M2 × 6 screws from the left and right speaker.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-31 2. Press speakers and secure the speakers with four M2X6 screws.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.12 Touch Pad Bracket, LED board and Finger Printer Board Removing the Touch Pad Bracket, LED board and Finger Printer Board Remove the touch pad bracket, LED board and finger printer board according to the following procedures and Figure 4.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 2. Remove the touch pad bracket. 3. Remove the LED board from the logic upper assem bly. 4. Pull the finger printer board up to remove it from the logic upper assem bly. Figure 4 .
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 4-34 Installing the Touch Pad Bracket, LED board and Finger Printer Board Install the touch pad bracket, LED board and Finger Printer board according to the following procedures.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.13 Thermal Fan Removing the Thermal Fan Remove the thermal fan according to the following procedures and Figure 4.23. 1. Detach the cable from the motherboard. 2. Remove two M2.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.14 Motherboard Removing the Motherboard Remove the motherboard according to the following procedures and Figure 4.24. 1. Remove one M2.5x4 screw, seven cables and one DC-in jack from the logic lower assem bly as indicated by arrows in Figure 4.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 2. Put the DC-in jack into the socket and put the DC cables according to the figure 4.25. Figure 4 . 25 Installing the DC-in jack 3. Secure one M2.5x4 screw. 4. Attach seven cables to the motherboard as indicated by arrows in Figure 4.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.15 UWB Module Removing the UWB module Remove the UWB m odule according to the following procedures and Figure 4.26. 1. Remove two M2.5x3 screws from the UW B module. 2. Remove the UWB m odule from the motherboard.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.16 Robson Module Removing the Robson module Remove the Robson module according to the following procedures and Figure 4.27. 1. Remove two M2.5x3 screws from the Robson m odule.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Satellite A350D Maintenance Manual 4-40 4.17 VGA Board and VGA Thermal Module (Optional) Removing the VGA Board and VGA Thermal Module Remove the VGA board and thermal m odule according to the following procedures and Figure 4.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Figure 4 . 28 Removing the VGA Board 3. Remove four spring screws on the VGA board to remove the VGA therm al module.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Installing the VGA Board and VGA Thermal Module Install the VGA board and thermal Module according to the following procedures. 1. Reapply Shinetsu 7762 grease on the VGA thermal module as shown in Figure 4.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-43 4.18 CPU and Thermal Module Removing CPU and Thermal Module Remove the CPU and the CPU thermal m odule according to the following procedures and Figure 4.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Figure 4 . 31 Removing the Thermal Module spring screws CAUTION: When removing the CPU, keep the following in mind: The CPU can become very hot during operation. Be sure to let it cool down before starting repair work.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Figure 4 . 32 Removing the CPU 4. Remove the CPU. Satellite A350D Maintenance Manual 4-45.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Installing CPU and Thermal Module Install the CPU and Thermal Module according to the following procedures. 1. Check the cam is in the unlock position. 2. Seat the CPU on the socket, using care not to damage the pins.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-47 6. Secure it with four spring screws according to the number sequence sealed on the thermal module.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.19 Display Assembly Removing the Display Assembly CAUTION: Use care to avoid the antenna cable being caught between the display assembly and the laptop. Remove the display assembly according to the following procedures and Figure 4.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 2. Remove four M2.5x4 screws securing the display assembly to the laptop. Figure 4 . 35 Removing the display assembly 3. Remove the display assembly. Installing the Display Assembly Install the display assembly according to the following procedures.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.20 LCD Bezel Assembly Removing the LCD Bezel Assembly Remove the LCD bezel assembly according to the following procedures and Figure 4.36. 1. Remove four rubber seals from the LCD bezel assem bly.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.21 LCD Module and Inverter Board Removing the LCD Module and Inverter Board Remove the LCD module and the inverter board according to the following procedures and Figure 4.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Figure 4 . 38 Removing the LCD Module from the LCD cover assembly Satellite A350D Maintenance Manual 4-52.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4. Remove six M2x3 screws that secure the LCD hinge assembly to the LCD panel and then remove the LCD hinge assembly. Figure 4 . 39 Removing the LCD Hinge Assembly 5. Turn the LCD module over and place it face down on a protective surface, such as a foam pad.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. Figure 4 . 40 Removing the LCD module NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module. Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or regulations.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-55 Installing the LCD Module and Inverter Board Install the inverter board according to the following procedures. 1. Turn the LCD module cover and place it face down on a protective surface such as a foam pad.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.22 CMOS Board and MIC Removing the CMOS Board and MIC Remove the CMOS Board and MIC according to the following procedures and Figure 4.41. 1. Disconnect the CMOS cable from the CMOS module connector and rem ove the CMOS board.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.23 Hinge Saddle Removing the Hinge Saddle Remove the hinge saddle according to the following procedures and Figure 4.42. 3. Remove two M2.5x6 screws that secure the hinge saddles to the logic lower assembly.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.24 CRT Board Removing the CRT Board Remove the CRT board according to the following procedures and Figure 4.43 and 4.44. 1. Remove the CRT board from the logic lower assem bly.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-59 Installing the CRT Board Install the CRT board according to the following procedures. 1. Secure the CRT bracket to the CRT board with two M2.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.25 USB Board Removing the USB Board Remove the USB board according to the following procedures and Figure 4.45. 1. Remove one M2.5x4 screw that secures the USB board to the logic lower assembly.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures 4.26 FM Jack Removing the FM Jack Remove the FM jack according to the following procedures and Figure 4.
4 Replacement Procedures Error! Style not defined. Error! Style not defined. 4.27 Bluetooth Card Removing the Bluetooth card Remove the Bluetooth card according to the following procedures and Figure 4.47. 1. Remove the Bluetooth cable from the Bluetooth card.
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures Satellite A350D Maintenance Manual 4-63 Installing the Bluetooth card Install the Bluetooth card according to the following procedures. 1. Seat the card in the correct position on the logic lower assembly.
Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assem bly or disassembly.
3. If the panel’s surface gets dirty or moist, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to a soft cloth and then wipe the panel’s surface.
5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle grounding device when handling the module.
7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below its specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.
10. If you transport the module, do not use packing material that contains epoxy resin (am ine) or silicon glue (alcohol or oxime). These materials can release gas that can dam age the panel’s polarization.
Appendix B Appendix B Board Layout B.1 System Board T op View Figure B-1 System Board Layout (Top) Los Angeles 10A+/10AG+ Maintenance Manual [CONFIDENTIAL] B-1.
B.2 System Board Bottom V iew Figure B-2 System Board Layout (Bottom) B-2 [CONFIDENTIAL] Los Angeles 10A+/10AG+ Maintenance Manual.
Table B-1 System Board ICs (top and bottom) Number Name U3 North bridge AMD RS780/RX781 U4 Clock Generator SLG8SP626VTR U15 South bridge AMD SB700 U33 KB926QFA1(EC) U46 BIOS ROM UA2 ALC272-GR U37 JMB380(CARD READ) U20 RTL8111C Table B-2 System Board Connectors (top and bottom) Number Name JCPU CPU Socket JFAN Fan conn.
B-4 [CONFIDENTIAL] Los Angeles 10A+/10AG+ Maintenance Manual JPOWER Power/B conn. JLED LED/B conn. JCS CapSensor/B conn. JFM FMTuner/B conn. JESATA eSATA conn. JTV TV OUT conn. JLAN LAN conn. JLINE Headphones conn. JEXMIC External MIC conn. JP34 EC debug conn.
C. Appendix C Pin Assignments System Board C.1 JF AN Table C-1 FAN I/F pin assignments (3-pin) Pin No. Signal name I/O Pin No. Signal Name I/O 1 +FAN1 2 FAN_SPEED1 3 GND - C.2 JFM Table C-2 FM I/F pin assignments (10-pin) Pin No. Signal name I/O Pin No.
17 LCD_TZCLK- O 18 LCD_TXOUT2- O 19 LVDS_SEL O 20 GND 21 LCD_EDID_CLK O 22 LCD_TZOUT0+ O 23 LCD_EDID_DATA O 24 LCD_TZOUT0- O 25 +LCDVDD_R O 26 GND 27 +LCDVDD_R O 28 LCD_TZOUT1+ O 29 +3VS - 30 LCD_TZOUT1- O 31 NA 32 GND 33 +LCD_INV 34 LCD_TZOUT2+ O 35 +LCD_INV 36 LCD_TZOUT2- O 37 +LCD_INV 38 GND 39 +LCD_INV 40 BKOFF# O C.
15 HDMI_SCLK O 16 HDMI_SDATA O 17 GND 18 +HDMI_5V_OUT O 19 HDMI_HPD O C.6 JHDD0 Table C-6 1 st HDD I/F pin assignments (22-pin) Pin No. Signal name I/O Pin No.
13 GND 14 +5VS 15 +5VS 16 +5VS 17 GND 18 NC 19 GND 20 NC 21 NC 22 NC C.8 JODD Table C-8 SATA ODD I/F pin assignments (14-pin) Pin No. Signal name I/O Pin No. Signal Name I/O 1 GND 2 SATA_ITX_C_ DRX_P4 3 SATA_ITX_C_ DRX_N4 4 GND 5 SATA_IRX_DT X_N4 6 SATA_IRX_DT X_P4 7 GND 8 GND 9 +5VS 10 +5VS 11 MD 12 GND 13 GND 14 GND C.
C.10 JBT Table C-10 Bluetooth Connector pin assignments (10-pin) Pin No. Signal name Pin No. Signal Name I/O 1 GND 2 USB20_P5 3 USB20_N5 4 WLAN_BT_CLK 5 BT_DET# 6 BT_RST# 7 WLAN_BT_DATA 8 +BT_VCC 9 +3VS 10 GND C.11 JFP Table C-11 Finger Printer Connector pin assignments (4-pin) Pin No.
A3 WLAN_BT_DATA A4 GND A5 WLAN_BT_CLK A6 +1.5VS A7 CLKREQ_WLAN# A8 +UIM_PWR A9 GND A10 UIM_DATA A11 CLK_WLAN# A12 UIM_CLK A13 CLK_WLAN A14 UIM_RESET A15 GND A16 UIM_VPP A17 NC A18 GND A19 NC A20 XMIT_OFF# A21 GND A22 PLT_RST# A23 PCIE_IRX_C_WLA NTX_N4 A24 +3V_WLAN A25 PCIE_IRX_C_WLA NTX_P4 A26 GND A27 GND A28 +1.
7 PM_SMBCLK 8 PM_SMBDATA 9 +1.5VS_CARD 10 +1.5VS_CARD 11 EC_SWI# 12 +3VALW_CARD 13 PERST# 14 +3VS_CARD 15 +3VS_CARD 16 CLKREQ# 17 EXP_CPPE# 18 CLK_NEW# 19 CLK_NEW 20 GND 21 PCIE_IRX_C_NEW TX_N1 22 PCIE_IRX_C_NE WTX_P1 23 GND 24 PCIE_ITX_C_NE WRX_N1 25 PCIE_ITX_C_NEW RX_P1 RX_P1 26 GND C.
C.17 JGPS Table C-19 GPS Connector pin assignments (52-pin) Pin No. Signal name I/O Pin No. Signal Name I/O 1 WLAN_WAKE# 2 +3V_WLAN 3 WLAN_BT_DATA 4 GND 5 WLAN_BT_CLK 6 +1.
Pin No. Signal name I/O Pin No. Signal Name I/O 1 VREF O 2 VSS O 3 VSS O 4 DQ4 I/O 5 DQ0 I/O 6 DQ5 I/O 7 DQ1 I/O 8 VSS O 9 VSS O 10 DM0 I/O 11 DQS0# I/O 12 VSS O 13 DQS0 I/O 14 DQ6 I/O 15 VSS O 16 DQ7.
65 VSS O 66 VSS O 67 DM3 I/O 68 DQS3# I/O 69 NC - 70 DQS3 I/O 71 VSS O 72 VSS O 73 DQ26 I/O 74 DQ30 I/O 75 DQ27 I/O 76 DQ31 I/O 77 VSS O 78 VSS O 79 CKE0 I/O 80 NC/CKE1 I/O 81 VDD O 82 VDD O 83 NC - 8.
129 DQS4# I/O 130 DM4 I/O 131 DQS4 I/O 132 VSS O 133 VSS O 134 DQ38 I/O 135 DQ34 I/O 136 DQ39 I/O 137 DQ35 I/O 138 VSS O 139 VSS O 140 DQ44 I/O 141 DQ40 I/O 142 DQ45 I/O 143 DQ41 I/O 144 VSS O 145 VSS.
193 BA2 I/O 194 NC/A14 - 195 VDD O 196 VDD O 197 A12 I/O 198 A11 I/O 199 A9 I/O 200 A7 I/O C.19 JMIC Table C-21 Internal Microphone Connector pin assignments (2-pin) Pin No. Signal name I/O Pin No. Signal Name I/O 1 INT_MIC 2 GND C.20 JTV Table C-22 TV-OUT Connector pin assignments (6-pin) ) Pin No.
C.22 JKB Table C-24 Keyboard Connector pin assignments (34-pin) Pin No. Signal name I/O Pin No. Signal Name I/O 1 NUM_LED# 2 CURS_LED# 3 CAPS_LED# 4 CURS_LED# 5 KSI1 6 KSI6 7 KSI5 8 KSI0 9 KSI4 10 KSI.
3 +USB_VCCA 4 +USB_VCCA 5 NC 6 GND 7 USB20_N0 8 USB20_P0 9 GND 10 USB20_N1 11 USB20_P1 12 GND C.25 JCS Table C-27 FUN/B connector pin assignments (8P-pin) Pin No. Signal name I/O Pin No. Signal Name I/O 1 +5VALW_CS 2 +5VL_CS 3 CAP_INT# 4 GND 5 EC_SMB_DA1 6 EC_SMB_CK1 7 NC 8 NC C.
DWE# 15 XD_SD_MS_D1 16 XD_SD_D7 17 XD_SD_MS_D0 18 XD_SD_D6 19 XD_SD_MS_D2 20 SDCLK 21 +VCC_OUT 22 XDCD1#_MSCD# 23 XD_SD_D5 24 XD_SD_MS_D3 25 SDCMD_MSBS_X DWE# 26 MSCLK 27 XD_SD_D4 28 +VCC_OUT 29 XD_SD_MS_D3 30 XD_SD_MS_D2 31 GND 32 XD_SD_MS_D0 33 XDWP#_SDWP# 34 SDCMD_MSBS_X DWE# 35 XD_ALE 36 XD_CLE 37 XDCE# 38 XD_RE# 39 XD_RB# 40 XD_CD# C.
23 PCIE_MTX_C_GRX_P 12 24 PCIE_GTX_C_MRX_ P12 25 GND 26 GND 27 PCIE_MTX_C_GRX_N 11 28 PCIE_GTX_C_MRX_ N11 29 PCIE_MTX_C_GRX_P 11 30 PCIE_GTX_C_MRX_ P11 31 GND 32 GND 33 PCIE_MTX_C_GRX_N 10 34 PCIE_GTX.
4 N4 71 PCIE_MTX_C_GRX_P 4 72 PCIE_GTX_C_MRX_ P4 73 GND 74 GND 75 PCIE_MTX_C_GRX_N 3 76 PCIE_GTX_C_MRX_ N3 77 PCIE_MTX_C_GRX_P 3 78 PCIE_GTX_C_MRX_ P3 79 GND 80 GND 81 PCIE_MTX_C_GRX_N 2 82 PCIE_GTX_C.
121 GND 122 GND 123 VGA_HDMI_CLK+ 124 LCD_TZOUT0+ 125 VGA_HDMI_CLK- 126 LCD_TZOUT0- 127 GND 128 GND 129 VGA_HDMI_CLK 130 LCD_TZOUT1+ 131 VGA_HDMI_DATA 132 LCD_TZOUT1- 133 VGA_HDMI_HPD 134 GND 135 LCD_.
187 1.8VS 188 NC 189 1.8VS 190 B+ 191 1.8VS 192 B+ 193 1.8VS 194 B+ 195 1.8VS 196 B+ 197 1.8VS 198 B+ 199 1.8VS 200 B+ C.29 JEXMIC Table C-31 EXMIC connector pin assignments (5P-pin) Pin No. Signal name I/O Pin No. Signal Name I/O 1 GND 2 MIC1_L 3 MIC1_R 4 MIC_SENSE 5 GND C.
C-20 [CONFIDENTIAL] Los Angeles 10A+/10AG+ Maintenance Manual C.32 JSPKL Table C-35 SPKL connector pin assignments (4P-pin) Pin No. Signal name I/O Pin No. Signal Name I/O 1 SPK_L1 2 SPK_L2 3 NC 4 NC C.33 JSPKR Table C-36 SPKR connector pin assignments (4P-pin) Pin No.
Appendix D Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16.
Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B.
Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 58 Ctrl(L) 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R.
Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 07 F0 07 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 X Fn — — — — *4 X Win E0 5B E0 DB E0 1F E0 F0 1F x App E0 5D E0 DD E0 2F E0 F0 2F Notes: 1.
Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Break 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 .
Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71.
Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Keytop Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5).
D-8 [CONFIDENTIAL] Satellite A350/A350D Se ries Maintenance Manual Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Common E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.
Appendix E Key Layout 1. United Status (US) K e yboard Figure US keyboard 2. T raditional Chinese (CH) K eyboard Figur e CH keyboard.
3. Thai (TI) K eyboard Figur e TI keyboar d 4 . Ko r e a n ( KO ) Key b o a r d Figur e KO keyboard.
5. United Kingdom (UK) K eyboard Figur e UK keyboard 6. US International (UI) K eyboard Figur e UI keyboard.
7. Hebrew (HB) K eyboard Figur e HB keyboard 8. Danish (DM) K eyboard Figur e DM keyboard.
9. Swiss (S W) Ke yboard Figur e SW keyboar d 10. Arabic (ARE) K eyboard Figur e ARE keyboar d.
11. Czech (CZ) K eyboard Figur e CZ keyboard 12. Russian (R U) K eyboard Figur e RU keyboard.
13. Portuguese (PO) K eyboard Figur e PO keyboard 14. Slov akian (SL) K eyboard Figur e SL keyboar d.
15. Italian (IT) K eyboard Figur e IT keyboar d 16. F renc h (FR) K eyboard Figur e FR keyboard.
17. German (GR) K eyboard Figur e GR keyboard 18. Greek (GK) K eyboard Figur e GK keyboard.
19. Canada F renc h (CF) K eyboard Figur e CF keyboard 20. Hungarian (HG) K eyboard Figur e HG keyboard.
21. Spanish (SP) K eyboard Figur e SP keyboar d 22. T urkish (TR) K eyboard Figur e TR keyboar d.
3. T urkish F (TF-F) K eyboard Figur e TF-F keyboard 24. Swedish (SD) K eyboard Figur e SD keyboard.
25. Belgian (BE) K eyboard Figur e BE keyboard 26. Y ugoslavian (YU) K eyboard Figur e YU keyboar d.
2 7 . Norwegian (NW) K eyboard Figur e NW keyboar d 28. Scandinavian (ND) K eyboard Figur e ND keyboard.
29. Canadian Multinational (A C) Ke yboard Figur e AC keyboar d 30. Canadian Bilingu al (CB) K eyboard Figur e CB keyboard.
31 . Japanese (JP) K eyboard Figur e JP keyboar d 32. R omania (R O) K eyboard Figur e RO keyboard.
32. Bulgaria (BU) K eyboard Figur e BU keyboard.
Satellite A350/A350D Series Ma intenance Manual [CONFIDENTIAL] F-1 F. Appendix F Series Screw Torque List (KTKAA) Table F-1 Series Screw Torque List SCREW P/N SCREW SPEC Q'ty LOCATION SCREW TORQUE LCD ASSY MACK2002MG0 M2.0*3 6 LCD BRK TO LCD PANEL(R/L) 1.
F-2 [CONFIDENTIAL] Satellite A350/A350D Series Mainten ance Manual MACK20251G0 M2*2.5 2 ODD BR K T O ODD MODULE 1.2~1.5kg LOG UP MA00000CSG0 M 2.0* 6.8 ( 半牙 ) 4 SPEAKER R/L TO LOG UP 2.5~3.0 kg MA0000061G0 M 2.5* 4 1 POWER PCB TO UP 2.5~3.0 kg MA0000069G0 M 2* 4 3 TP BRK TO LOG UP 2.
Appendix G Appendix G Reliability The followin g table shows MT BF (Mean Tim e Between Failures) for each com ponent. Table G-1 MTBF Component Time (hours) LCD 10,000 Keyboard 60,000 HDD 300,000 Optic.
An important point after buying a device Toshiba Satellite A350D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba Satellite A350D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba Satellite A350D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba Satellite A350D you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba Satellite A350D will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba Satellite A350D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba Satellite A350D.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba Satellite A350D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba Satellite A350D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
