Instruction/ maintenance manual of the product r700 Toshiba
Go to page of 474
[CONFIDENTIAL] Toshiba Personal Computer PORTÉGÉ R700 Series Maintenance Manual First edition June 2010 TOSHIBA CORPORATION File Number 960-833.
ii PORTÉGÉ R700 Series Maintenance Manual (960-813)) [CONFIDENTIAL] Copyright © 2010 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba.
PORTÉGÉ R700 Series Maintenance Manual (960-813) [CONFIDENTIAL] iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer PORTÉGÉ .
iv PORTÉGÉ R700 Series Maintenance Manual (960-813)) [CONFIDENTIAL] The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Qosmio F60 Series system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
PORTÉGÉ R700 Series Maintenance Manual (960-813) [CONFIDENTIAL] v Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition.
vi PORTÉGÉ R700 Series Maintenance Manual (960-813)) [CONFIDENTIAL] Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... ... 1-5 1.
PORTÉGÉ R700 Series Maintenance Manual (960-813) [CONFIDENTIAL] vii Chapter 2 Troubleshooting Procedures 2.1 Troubleshooting ......................................................................................................... 2-6 2.2 Troubleshooting Flowchart .
viii PORTÉGÉ R700 Series Maintenance Manual (960-813)) [CONFIDENTIAL] Chapter 3 Tests and Diagnostics 3.1 The Diagnostic Test ................................................................................................... 3-7 3.2 Executing the Diagnostic Test .
PORTÉGÉ R700 Series Maintenance Manual (960-813) [CONFIDENTIAL] ix 3.33 Starting TOSHIBA Test & Diagnostic .................................................................... 3-95 3.34 Windows PE T&D ........................................
x PORTÉGÉ R700 Series Maintenance Manual (960-813)) [CONFIDENTIAL] 4.26 Camera module ........................................................................................................ 4-82 4.27 Wireless LAN antenna/Bluetooth antenna/3G antenna .
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-1 Chapter 1 Hardware Overview.
1 Hardware Overview 1-2 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833).
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-3 Chapter 1 Contents Chapter 1 Hardware Overview ......................................................................................... 1 1.1 Features .........
1 Hardware Overview 1-4 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) Figures Figure 1-1 Front of the computer ........................................................................................... 11 Figure 1-2 System unit configurations .
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-5 1.1 Features The Toshiba PORTÉGÉ R700 Series Personal Computer uses extensive Large Scale Integration (LSI),.
1 Hardware Overview 1-6 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) Chipset Toshiba PORTÉGÉ R700 Series computer is Equipped with Intel Calpella Ibex peak-M QM57 (AMT model) or HM55 (Non-AMT model).
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-7 Display The PC comes in with one of the following types: 33.
1 Hardware Overview 1-8 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) External monitor (RGB) port This port provides 15-pin, analog VGA port. This port allows you to connect an external monitor to the computer. HDMI out port HDMI out port can connect with Type A connector HDMI cable.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-9 Docking interface port The docking interface port enables connection of an optional TOSHIBA Hi-Speed Port Replicator.
1 Hardware Overview 1-10 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) Web Camera Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a comm unication tool such as Windows Live Messenger.
1 Hardware Overview Figure 1-1 Front of the computer PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-11.
1 Hardware Overview The system unit configuration is shown in figure 1-2 Figure 1-2 System unit configurations 1-12 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833).
1 Hardware Overview 1.2 System Unit Block Diagram Figure 1-3 is a block diagram of the system unit. Figure 1-3 System unit block diagram PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIA.
1 Hardware Overview 1-14 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) The system unit is composed of the following m ajor components: Microprocessor The Toshiba PORTÉGÉ R700 Series computer is equipped with an Intel ® Processor.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-15 Chipset Toshiba PORTÉGÉ R700 Series computer is Equipped with Intel Calpella Ibex peak-M QM57 (AMT model) or HM55 (Non-AMT model). Names Feature QM57 HM55 PCI Express* 2.
1 Hardware Overview 1-16 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) VGA Controller The PC comes in with one of the following types: The internal graphics controller in Intel Processor (Core i*) is used.. LAN Controller This controller has the following functions: Support only a Gigabit Ethernet.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-17 Wireless LAN One PCI Express Mini Card slot1 802.11a/g+WiMax : Intel Kilmer Peak (2x2) (JPN) Intel 802.16e(a/g)13ch+WiMAX-KP 2x2 MOW-HMC Intel 802.11(a/b/g)13ch-PP 2x2 MOW-HMC Intel 802.
1 Hardware Overview 1-18 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) SD Media Controller slot Card slot ｘ１ SD, mini SD (w/ adapter),Micro SD (w/adapter),xD, MMC SD Token KEY, SD boot correspondence SD IO is No-supporting.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-19 Other chips Clock generator ： ICS9LVRS394CKLFT (Made by Integrated Device Technology) EC/KBC ： MEC1609-PZP(REVISION.
1 Hardware Overview 1.3 3.5-inch Floppy Disk Drive (USB External) The 3.5-inch FDD is a thin, high-performance reliable drive that supports 720KB (formatted) 2DD and 1.44MB (formatted) 2HD disks. The FDD is shown in figure 1-4. The specifications for the FDD are listed in Table 1-1.
1 Hardware Overview 1.4 HDD&SSD 1.4.1 2.5-inch SATA HDD The removable SATA HDD is a random access non-volatile storage device. It has a non- removable 2.5-inch magnetic disk and m ini-Winchester type magnetic heads. The computer supports a 160GB, 250GB, 320GB or 500GB.
1 Hardware Overview 1-22 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) Table 1-3 2.5-inch HDD specifications (TSDC) Specifications Items TSDC G8BC0006T161 TSDC G8BC0006T321 TSDC G8BC0006T501 Outline Width (mm) 100.0 Dimensio ns Height (mm) 9.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-23 1.4.2 SATA SSD Some models are equipped with a "Solid State Drive (SSD)" instead of a hard disk drive. The computer supports a 128GB, 256GB and 512GB.
1 Hardware Overview 1-24 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) 1.5 Optical Drive (ODD) 1.5.1 DVD-Super Multi Drive The DVD Super Multi drive accommodates either 12 cm (4.72-inch) or 8 cm (3.15-inch) CD- ROM, DVD-ROM, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM, DVD-R DL and DVD+R DL.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-25 Access time (ms ) CD-ROM DVD-ROM 150 typ. 180 typ. . Supported Disks CD: CD-ROM (12cm, 8cm), CD-R, CD-RW DVD:.
1 Hardware Overview 1-26 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) Access time (ms ) CD-ROM DVD-ROM 220msec typ. 220msec typ..
1 Hardware Overview 1.6 Keyboard The keyboard is mounted 85(US)/87(UK) keys that consist of character key and control key, and in conformity with JIS. The keyboard is connected to mem brane connector on the system board and controlled by the keyboard controller.
1 Hardware Overview 1.7 TFT Color Display The TFT color display consists of 14.0-inch HD /HD+ LCD module. 1.7.1 LCD Module The LCD module used for the TFT color display uses a backlight as the light source and can display a maximum of 16M colors with 1,366 x 768 resolutions.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-29 1.8 Power Supply The power supply supplies many different voltages to the system board and perform s the following functions: 1. Judges that the DC power supply (AC adapter) is connected to the computer.
1 Hardware Overview Table 1-8 Power supply output rating 1-30 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833).
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-31.
1 Hardware Overview 1-32 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) 1.9 Batteries The computer has three types of batteries as follows: Main battery pack RTC battery Th.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-33 1.9.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The microprocessor controls whether the charge is on or off and detects a full charge when the AC adaptor and battery are attached to the computer.
1 Hardware Overview 1-34 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenance Manual (960-833) Data preservation time When turning off the power in being charged fully, the preservation time is as following Table 1-11.
1 Hardware Overview PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 1-35 1.10 AC Adapter The AC adapter is also used to charge the battery.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-1 Chapter 2 Troubleshooting Procedures.
Troubleshooting Procedures 2-2 PORTÉGÉ R700 Series Maintenance Manual (960- 833) [CONFIDENTIAL] 2.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-3 Chapter 2 Contents 2 2-2 2.1 Troubleshooting ......................................................................................................2-6 2.
Troubleshooting Procedures 2-4 PORTÉGÉ R700 Series Maintenance Manual (960- 833) [CONFIDENTIAL] 2.9 Display Troubleshooting .......................................................................................2-42 2.10 Optical Disk Drive Troubleshooting .
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-5 Figures Figure 2-1 Troubleshooting flowchart (1/2) ..........................................................................2-9 Tables Table 2-1 Battery icon .
Troubleshooting Procedures 2-6 PORTÉGÉ R700 Series Maintenance Manual (960- 833) [CONFIDENTIAL] 2.1 Troubleshooting Chapter 2 describes how to determine which Fi eld Replaceable Unit (FRU) in the computer is causing the computer to malfunction. (The “FRU ” m eans the replaceable unit in the field.
Troubleshooting Procedures There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is descri bed in the figure as line. (2) Pin connection is describe d in the figure as arrow.
Troubleshooting Procedures 2-8 PORTÉGÉ R700 Series Maintenance Manual (960- 833) [CONFIDENTIAL] 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide fo r determining which troubleshooting procedures to execute.
Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-9.
Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) 2-10 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL].
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-11 If the diagnostics program cannot detect an e rror, the problem may be intermittent. The Test program should be executed several tim es to is olate the problem.
Troubleshooting Procedures 2-12 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 15. If a malfunction is detected on the Web camera, perform the Web camera Troubleshooting Procedures in Section 2.18 16. If a malfunction is detected on the 3G, pe rform the 3G Troubleshooting Procedures in Section 2.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-13 2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts. To determine if the power supply is functioning properly, start with Procedure 1 and continue with the other Procedures as instructed.
Troubleshooting Procedures 2-14 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] Table 2-2 DC IN icon DC IN icon Power supply status Lights blue DC power is being supplie d from the AC adapter. Blinks orange Power supply malfunctio n *1 Doesn’t light Any condition other than those above.
Troubleshooting Procedures 2.3.2 Procedure 2 Error Code Check If the power supply microprocessor detects a ma lfunction, the DC IN icon blinks orange. The blink pattern indicates an error as shown below.
Troubleshooting Procedures 2-16 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] Check 1 Convert the DC IN icon blink pattern into the hexadecimal error code and comp are it to the tables below.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-17 Main Battery Error code Meaning 22h Main battery discharge current is over 0.5A. 23h Main battery charge current is over 3.5A 24h The compensation value of [0A] is not within the limits from design data (± 400mA).
Troubleshooting Procedures 2-18 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] E3V output Error code Meaning 60h E3V voltage is over 3.96V. 61h E3V voltage is under 2.81V when the compute r is powered on. 62h E3V voltage is under 2.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-19 PTV output : Not used Error code Meaning A0h PTV voltage is over 1.26V. A1h PTV voltage is under 0.89V when the compute r is powered on. A2h PTV voltage is under 0.
Troubleshooting Procedures Check 2 In the case of error code 10h or 12h: Make sure the AC adapter and AC power cord are firmly plugged into the DC IN 19 V socket and wall outlet. If th e cables are connected firmly, go to the following step. Connect a new AC adapter and AC power cord.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-21 2.3.4 Procedure 4 Charging Check Check if the power supply cont roller charges the battery pack properly. Perform the following procedures: Check 1 Make sure the AC adapter is firmly plugged into the DC IN jack.
Troubleshooting Procedures 2-22 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 2.4 System Board Troubleshooting This section describes how to determ ine if th e system board is malfunctioning or not. Start with Procedure 1 and continue with the other procedures as instructed.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-23 2.4.1 Procedure 1 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. The IRT tests each IC on the system board and initializes it.
Troubleshooting Procedures 2-24 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] If any other error message displays, perform Check 3. Check 3 The IRT checks the system board. When the IRT detects an erro r, the system stops or an error message appears.
Troubleshooting Procedures 2.4.2 Procedure 2 Debugging Port Check Check the D port status by a debug port test. Th e tool for debug port test is shown below. Figure 2-1 A set of to ol for debug port test 1. Not a Serial Port model should connect a de bug port test cable to connector CN3110 of a system board.
Troubleshooting Procedures 2-26 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] Table 2-4 Debug port error status (1/2) pending System BIOS Boot block processing Debug Code BIOS processing ou tline Target Device IC No.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-27 Table 2-4 Debug port error status (2/2) System BIOS IRT processing Debug Code BIOS processing outline Target Device IC No.
Troubleshooting Procedures 2-28 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] F117 End of SC initiali zation RAM CN140 0,CN1410 (RAM Co n n.) F118 Processing in front of boot RAM CN1400,CN 1410 (RAM Con n.) F119 Device proces sing in front of boot PCH IC1600 (PCH) F1FF End of IRT processing.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-29 2.4.3 Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. These tests check the system board.
Troubleshooting Procedures 2-30 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 2.5 USB FDD Troubleshooting To check if the USB FDD is malfunctioning or not, follow the troubl eshooting procedures below as instructed.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-31 2.5.2 Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD, tu rn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more inform ation about th e diagnostics test procedures.
Troubleshooting Procedures 2.5.3 Procedure 3 Connector Check and Replacement Check USB FDD is connected to USB port on Sound/ USB board or eSATA/HDMI/USB board.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-33 NOTE: When checking the connection, be sure to check it with care for the followings. 1. Cable can not be disconnected from the connector. 2. Cable is connected st raight to the connector.
Troubleshooting Procedures 2-34 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 2.6 HDD/SSD Troubl eshooting To check if the SATA HDD/SSD is malf unctioning or not, follow the troubleshooting procedures below as instructed.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-35 2.6.2 Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. When the test detects an erro r, an error message is displayed on the screen.
Troubleshooting Procedures 2-36 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 2.6.3 Procedure 3 Format Check The computer’s HDD is formatted using the DOS FORMAT program or the physical format program of the test program. To format the HDD, start with Check 1 below and perform the other steps as required.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-37 2.6.4 Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test.
Troubleshooting Procedures 2.6.5 Procedure 5 Connector Check and Replacement Check The SATA HDD/SSD may be disc onnected, or the SATA HDD/SSD or system board may be damaged.
Troubleshooting Procedures 2.7 Keyboard Troubl eshooting To check if the computer’s keyboard is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check 2.
Troubleshooting Procedures 2-40 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 2.8 Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Troubleshooting Procedures 2.8.2 Procedure 2 Connector Check and Replacement Check The connection of the cable and board may be defective. Otherwise, they m ay be faulty.
Troubleshooting Procedures 2.9 Display Troubleshooting This section describes how to determine if the computer’s display is functioning properly. Start with Procedure 1 and continue with the other procedures as instructed.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-43 Procedure 3 Replacement Check The LCD module and system board are connect ed to display circuits. Any of these components may be damaged. Refer to Chapter 4, Replacement Procedures.
Troubleshooting Procedures 2.10 Optical Disk Drive Troubleshooting To check if optical disk drive is malfunctioni ng or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check 2.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-45 Check 2 The ODD （ SATA or PAPA ） or the FPC( FULOA* or FULOD*) may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures .
Troubleshooting Procedures 2.11 LAN Troubleshooting To check if the computer’s LAN is malfunc tioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check 2.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-47 2.12 Wireless LAN Troubleshooting To check if the computer’s Wireless LAN is m alfunctioning or not, follow the troubleshooting procedures below as instructed.
Troubleshooting Procedures 2.12.2 Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: Any of the connections may be defective.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-49 2.12.3 Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty.
Troubleshooting Procedures 2.13 Bluetooth Troubleshooting To check if the Bluetooth is malfunctioning or not, follow the troubl eshooting procedures below as instructed.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-51 Check 2 The Bluetooth module may be damaged. Replace it with a n ew one following the instructions in Chapter 4, Replacement Procedures and check the operation.
Troubleshooting Procedures 2.14 Sound Troubleshooting To check if the sound function is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check Procedure 3: Replacement Check 2.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-53 2.14.3 Procedure 3 Replacement Check If headphone does not work properly, perform check 1. If external microphone does not wo rk properly, perform check 2.
Troubleshooting Procedures 2.15 SD Card Slot Troubleshooting This section describes how to determ ine if th e computer's SD Card functions are functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-55 As the connection may be defective, disassem ble the computer and check each connection. If the problem still occur s, go to Check 1. Check 1 SD Card may be disconnected.
Troubleshooting Procedures 2-56 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] 2.16 PCI ExpressCard Slot Troubleshooting This section describes how to check PCI Expr essCard slot by inspecting a card with PCI Express interface and a card with USB 2.
Troubleshooting Procedures 2.17 Fingerprint sensor Troubleshooting CAUTION : To delete the account for confirming the fingerprint operation, it is necessary to log on by the account with the ma nagement authority. If the password has been set to log on, ask the Log-ON password to the user.
Troubleshooting Procedures 2-58 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] Procedure 1 Setting Windows Log-ON password 1. Open [User Account] from [Control Panel]. 2. Click [User Account]. 3. Click the icon of the account (user’s na me) that you want to set the password.
Troubleshooting Procedures 7. When the Store to Sensor screen is displa yed, check Store fingerpri nt to Sensor. Click Finish to complete fingerprint registration. Procedure 3 Authentication of fingerprint 1. Turn on the computer to start up Windows. 2.
Troubleshooting Procedures Procedure 4 Connector Check and Replacement Check The connection of the cable and board may be defective. Otherwise, they m ay be faulty.
Troubleshooting Procedures 2.18 Web camera Troubleshooting To check if the computer’s web camera is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Check on Windows OS Procedure 2: Connector Check and Replacement Check 2.
Troubleshooting Procedures Check 2 If web camera does not work properl y (the image from a web camera cannot be displayed.), web camera m ay be fault y. Replace it with a new one following the steps in Chapter 4, Replacement Procedures . If the problem still occurs, perform Check 3 Check 3 Sound/USB board (FULSN*) or the FPC (FULYN*) may be faulty.
Troubleshooting Procedures PORTÉGÉ R700 Series Maintenance Manu al (96 0-833) [CONFIDENTIAL] 2-63 2.19 3G Troubleshooting: This section describes how to determine if the computer’s 3G is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required.
Troubleshooting Procedures Procedure 2 Replacement Check k The 3G wiring diagram is shown below: The 3G antenna, 3G card and the system board are connected to the circuits.
Troubleshooting Procedures 2.20 HDMI Troubleshooting To check if the computer’s HDMI is malf unctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Check on HDMI TV Procedure 2: Connector Check and Replacement Check 2.
Troubleshooting Procedures 2-66 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] When you unplug the HDMI cable and re-plug it in please wait at least 5 seconds before you replug the HDMI cable again.
Troubleshooting Procedures Display mode at "List All Modes" HD Format 1920 by 1080, True Color (32bit), 60Herts 1080p 1920 by 1080, True Color (32bit), 30Herts (Interlaced) 1080i 1280 by 720.
Troubleshooting Procedures 2-68 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] Check 2 It checks whether there are any abnor malities in a setup of HDMI TV, and return s to Procedure 1. In addition, a HDMI se tup of television should check "the instructions m anual of attachment on HDMI TV.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3 -1 Chapter 3 Tests and Diagnostics.
Tests and Diagnostics 3-2 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3 -3 Chapter 3 Contents 3 3-2 3.1 The Diagnostic Test ................................................................................................... 3-7 3.1.1 Diagnostics menu .
Tests and Diagnostics 3-4 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.21.2 Operations .......................................................................................... 3-56 3.22 Log Utilities .......................
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3 -5 3.34.2 Starting T&D ...................................................................................... 3-98 3.34.3 System Information Menu ...........
Tests and Diagnostics 3-6 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Tables Table 3-1 Subtest names (1/2) ............................................................................................ 3-18 Table 3-2 Error codes and error status names (1/3) .
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3 -7 3.1 The Diagnostic Test This chapter explains how to use the Diagnostic Test programs to test the functions of the computer’s hardware modules. The Diagnostics Program s are stored on some Diagnostic Disks.
Tests and Diagnostics 3-8 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) REAL TIMER TEST NDP TEST EXPANSION TEST CD-ROM/DVD-ROM TEST ERROR RETRY COUNT SET [FD.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3 -9 The Diagnostics Disk (Main T&D) 3.1.3 Heatrun test program The heatrun test starts automatically after the selection. You will need the f ollowing equipment to perform this program.
Tests and Diagnostics 3-10 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.2 Executing the Diagnostic Test To start the Repair test program, follow these steps: 1. Insert the Repair test program disk in the USB floppy disk drive or Optical disk drive.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-11 3.2.1 Diagnostics menu (T&D) Set the highlight bar to 3 , and press Enter . The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.
Tests and Diagnostics 3-12 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Set the highlight bar to 1 , and press Enter . The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-13 Select the option you want to execute and press Enter . When you select 1- SYSTEM TEST , the following message will appear: SYSTEM TEST NAME XXXXXX xxxxxxx DIAGNOSTIC TEST VX.
Tests and Diagnostics 3-14 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Use the up and down arrow keys to move the cursor to “ ERROR STOP ”. Use the right and left arrow keys to move the cursor to the desired option and press Enter .
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-15 3.3 Setting of the hardware configuration To execute this program, input 1 in the startup menu. Then press Enter to select the (2)- Initial config set . The H/W initial inform ation setting tool consists of four subtests.
Tests and Diagnostics 3-16 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 7. “Create DMIINFO TXT (Y/N)?” is displayed. Press Y, then the DMI information (text data) is written to the Floppy disk, etc.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-17 3.4 Heatrun Test To execute this program, press 2 , Repair Heatrun and press Enter in the startup menu, press Enter . After selecting this test, the same subtests as 3.
Tests and Diagnostics 3-18 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.5 Subtest Names Table 3-1 lists the subtest names for each test program in the DIAGNOSTIC TEST MENU. Table 3-1 Subtest names (1/2) No. Test Name Subtest No.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-19 Table 3-1 Subtest names (2/2) No. Test Name Subtest No. Subtest Name 6 PRINTER [Not supported] 01 02 03 Rip.
Tests and Diagnostics 3-20 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.6 System Test To execute the System Test select 1 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter .
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-21 If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU operating clock speed can be changed. If the CPU does not support Gerserville (SpeedStep), the following message is displayed and the test is ended.
Tests and Diagnostics 3-22 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) To test the cache memory, a pass-through write-read com parison of ‘5Ah’ data is run repeatedly to the test area (‘7000’: ‘Program’ size to ‘7000’: ‘7FFF’ (32 KB)) to check the hit-miss ratio (on/off status) for CPU cache memory.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-23 3.7 Keyboard Test To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter .
Tests and Diagnostics 3-24 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.8 Display Test To execute the Display Test, select 4 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter .
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-25 Subtest 04 Gradation & Mode test for VGA This subtest displays gradations for following modes.
Tests and Diagnostics 3-26 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest 06 “H” Pattern Display This subtest displays a full screen of “H” patterns.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-27 3.9 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD.
Tests and Diagnostics 3-28 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Select the number of the subtest you want to execute and press Enter . The following message will appear during the floppy disk test. FLOPPY DISK IN PROGRESS XXXXXXX xxx DIAGNOSTIC TEST VX.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-29 3.10 Printer Test CAUTION : Printer Test is not supported for this model. To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen.
Tests and Diagnostics 3-30 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest 02 Function This subtest is for IBM compatible printers, and tests the following f unctions: Nor.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-31 3.11 Async Test CAUTION : Async Test is not supported for this model. To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen.
Tests and Diagnostics 3-32 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.12 Hard Disk Test To execute the Hard Disk Test, select 8 from the DIAGNOSTIC TEST MENU, press Enter , and follow the directions on the screen. CAUTION : The contents of the hard disk will be erased when subtest 02, 03, 04, 06, 08 or 09 is executed.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-33 4. The Hard Disk Test message will appear after you respond to the Detail Status prompt. Select the number of the subtest you want to execute and press Enter .
Tests and Diagnostics 3-34 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest 04 Cross talk & peak shift This subtest writes eight types of worst pattern data (listed below) to a cylinder, then reads the data while moving from cylinder to cylinder.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-35 3.14 Real Timer Test To execute the Real Timer Test, select 9 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter .
Tests and Diagnostics 3-36 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest 03 Real time carry CAUTION : When this subtest is executed, the current date and time are erased.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-37 3.15 NDP Test To execute the NDP test, select 10 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. CAUTION: Judge the existence of high-speed operation processor by 1bit of the composition byte.
Tests and Diagnostics 3-38 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.16 Expansion Test To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-39 Subtest 02 RGB monitor ID NOTE: To execute this subtest, monitor supporting EDID (Extended Display Identification Data) is required. Connect a wraparound connector to CRT monitor for the test of ID acquisition.
Tests and Diagnostics 3-40 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.17 CD-ROM/DVD-ROM Test To execute the CD-ROM/DVD-ROM test, select 12 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-41 3.18 Error Code and Error Status Names Table 3-2 lists the error codes and error status names for the Diagnostic Test.
Tests and Diagnostics 3-42 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Table 3-2 Error codes and error status names (2/3) Device name Error code Error status name FDD 01 02 03.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-43 Table 3-2 Error codes and error status names (3/3) Device name Error code Error status name (HDD) CC E0 0A .
Tests and Diagnostics 3-44 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.19 Hard Disk Test Detail Status When an error occurs in the hard disk test, the following message is displayed: HDC status = XXXXXXXX Detailed information about the hard disk test error is displayed on the screen by an eight- digit number.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-45 Table 3-4 HDC Error register contents Bit Name Description 7 BBK (Bad block mark) “0” … Not used “1” … A bad block mark is detected. 6 UNC (Uncorrectable) “0” … There is no uncorrectable data error.
Tests and Diagnostics 3-46 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.20 ONLY ONE TEST 3.20.1 Program Description This program tests the unique functions of this model. 3.20.2 Operations Select test 2 from the DIAGNOSTIC MENU and press Enter .
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-47 Subtest 01 Pressed Key Display (Main key) When you execute this subtest, the keyboard layout is drawn on the display as shown below. When any key is pressed, the corresponding key on the screen changes to the key character that was pressed.
Tests and Diagnostics 3-48 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest 02 USB NOTE : When executing this subtest, USB test module and USB cable must be connected. This subtest checks if USB port works properly. The following m enu appears in the display.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-49 Subtest 03 LED This subtest checks if each LED lights properly. The following m essage appears in the display in order. Follow the instructions in the display to execute the test.
Tests and Diagnostics 3-50 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest 04 Button This subtest checks the m oving of the of the front operation panel button. Press the eco button after the following message appears. Step 1 X 1 2 * * *.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-51 Subtest 05 Touch Pad This subtest checks the functions of the touch pad as shown below. A) Direction and parameter B) Switching function check. This test displays the response from the touch pad and touch pad switch.
Tests and Diagnostics 3-52 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) The following message appears in the display. [Touch Pad On/OFF Button test] Press [Touch Pad On/OFF] Button Please press Touch Pad On/OFF button After checking Touch, return to the ONLY ONE TEST menu automatically.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-53 Subtest 07 Fan control This subtest checks if FAN works properly. The following m essage appears in the display in order. ! Start low-speed rotation……….
Tests and Diagnostics 3-54 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest 08 Acceleration sensor This subtest detects and corrects the each axis (X, Y, Z). NOTE: Make sure that this subtest is executed on the following condition: 1.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-55 When this subtest is selected, the following message appears in the display. The heaven surface establishes in the upper direction Press [Enter] key NOTE : Be sure to execute the test with the display panel opened.
Tests and Diagnostics 3-56 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.21 Head Cleaning 3.21.1 Function Description This function cleans the heads in the FDD by executing a series of head load/seek and read operations. A cleaning kit is necessary to perform this program.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-57 3.22 Log Utilities 3.22.1 Function Description This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy disk or output the data to a printer.
Tests and Diagnostics 3-58 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.22.2 Operations Select 5 and press Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-59 3.23 Running Test 3.23.1 Function Description This function automatically executes the following tests in sequence: 1. System test (subtest 01) 2. Memory test (subtests 01, 02) 3.
Tests and Diagnostics 3-60 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.24 Floppy Disk Drive Utilities 3.24.1 Function Description This function formats the FDD, copies the floppy disk and displays the dump list for both the FDD and HDD.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-61 3.24.2 Operations 1. Selecting 7 from the DIAGNOSTIC MENU and pressing Enter displays the following message: [ FDD UTILITIES ] 1 - FORMAT 2 - COPY 3 - DUMP 4 – HDD-ID READ 9 - EXIT TO DIAGNOSTICS MENU 2.
Tests and Diagnostics 3-62 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3. COPY program (a) When COPY is selected, the following message appears: FLOPPY DISK FORMAT & COPY : VX.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-63 4. DUMP program (a) When DUMP is selected, the following message appears: DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX Drive type select (1:FDD, 2:HDD) ? (b) Select a drive type.
Tests and Diagnostics 3-64 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) (k) The following message will appear. To finish the dum p, select 3 . Press number key (1:up,2:down,3:end) ? (l) The following message will appear. Selecting 2 returns to the FDD UTILITIES MENU.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-65 3.25 System Configuration 3.25.1 Function Description The System Configuration program contains th e following configuration information for the computer: 1. Processor Type [Code/L2 cache] 2.
Tests and Diagnostics 3-66 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.25.2 Operations Select 8 from the DIAGNOSTIC MENU and press Enter. Then, the following system configuration appears in the display. System Configuration Display: Ver X.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-67 3.26 Wireless LAN Test Program (Atheros) Since there is no test program for Atheros-made wireless LAN cards, check the wireless LAN card type of the computer and the antenna connection by using Windows program s.
Tests and Diagnostics 3-68 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Check of the antenna connection 1. Confirm that the icon for wireless LAN appears at the lower right of the screen under the circumstances the wireless LAN comm unication is available.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-69 3.27 Wireless LAN Test Program (Intel-made a/b/g/n Setting up of REF PC) For the test of Intel-made wireless LAN cards , configure the test environm ent as shown below with the following equipment.
Tests and Diagnostics 3-70 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Open “My Computer” window and click “My Network places” on the left column. Click “View network connections” on the left column. The “Network Connections” window appears.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-71 Click “Install…” button on the “Local Area Connection Properties” window. Local Area Connection Properties window Select “Protocol” on the “Select Network Component Type” window and click “Add…” button.
Tests and Diagnostics 3-72 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) When “Install From Disk” window appears, click “Browse…” and specify the created “Clx_Res” folder. Then Click “OK”. (For the test, “PACKET.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-73 After the completion of REF PC setup, restart the WINDOW S. Then perform the Responder test program for Windows (W TWINSVR.EXE) in the Clx_Res folder. ・ WTWINSVR.
Tests and Diagnostics 3-74 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.28 Wireless LAN Test Program on DUT PC (Intel-made) 3.28.1 Wireless LAN Test Program (Intel-made : Shirley Peak) on DUT PC This section describes how to perform the wireless LAN transm itting-receiving test (Intel- made 802.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-75 To execute the subtest, input the subtest number and press Enter . Subtest01 Communication test of 11a mode for 5100/5150 m odule (Two antenna type) This subtest execute transmitting/receiving test in 802.
Tests and Diagnostics 3-76 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest03 Communication test of 11g mode for 5100/5150 m odule (Two antenna type) This subtest execute transmitting/receiving test in 802.11g mode using the main antenna.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-77 Subtest06 Communication test of 11b mode for 5100/5150 m odule (Three antenna type) This subtest execute transmitting/receiving test in 802.11b mode using the main antenna.
Tests and Diagnostics 3-78 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program This section describes how to perform the LAN/Modem/Bluetooth/IEEE1394 test with the test program. Insert the test program disk for LAN/Mode m/Bluetooth/IEEE1394 test in FDD and turn on the power.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-79 Subtest01 (i82562 + ICHx) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip.
Tests and Diagnostics 3-80 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Subtest02 (GbE) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip. Select 2 to execute and press Enter . The following message will appear: Testing adaptor.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-81 3.29.2 Modem test : (Not Used) For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the dedicated “FAT-MODE inspection device (product code: QE2000P01 made by Nitto Denki Seisakusyo)” for the tests.
Tests and Diagnostics 3-82 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.29.3 Bluetooth test Preparation ・ For the test of Bluetooth function, use the Windows program installed on the target computer (computer to be tested).
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-83 5. Select “Diagnostics” tab and click “Run”. 6. Check the “Log” to confirm the test result. 7. When the BT (Bluetooth) address of the responder device appears, the Bluetooth card and antenna connection are OK.
Tests and Diagnostics 3-84 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.29.4 IEEE1394 test (Not Used) To execute this test, input 4 and press Enter . NOTE: Use another computer that can communicate by IEEE1394 (i. Link) cable as a reference machine to perform this test.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-85 3.30 Sound Test program Sound TEST disk cannot be used in Satellite Pro S300, TECRA A10/S10/P10. Therefore, please test the sound on Windows OS. 1) Play a music file.
Tests and Diagnostics 3-86 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.31 SETUP 3.31.1 Function Description This program displays the current system setup inform ation as li.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-87 Power Management menu Wake-up on LAN Wake-up on LAN on Battery Wake on Keyboard Critical Battery Wake-up Dy.
Tests and Diagnostics 3-88 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Exit menu Load Setup Defaults Discard Changes Exit Saving Changes.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-89 3.31.2 Accessing the SETUP Program Turn on the power SW. then press F2 .
Tests and Diagnostics 3-90 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Security menu screen Power Management menu screen.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-91 Advanced menu screen Exit menu screen.
Tests and Diagnostics 3-92 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Moving Within the SETUP Menu and Changing Values 1. Press and to move between the two columns. Press and to m ove between items in a column.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-93 How to change setup Options Since a help is displayed on the right-hand side of each menu screen, it is referred to.
Tests and Diagnostics 3-94 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.32 Maintenance (WinPE&FreeDos) Test Program Operation 3.32.1 . Outline This document explains how to operate T&D that is released through TOSHIBA Test & Diagnostic CD.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-95 3.33 . Starting TOSHIBA Test & Diagnostic 3.33.1 Starting from CD 1. Load the TOSHIBA Test & Diagnostic Discs into the optical disc drive and turn off the computer's power.
Tests and Diagnostics 3-96 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) NOTE : After [winpe] is selected, the following message is displayed on the screen. At this time, ”Press any key to boot from CD or DVD..” is displayed, but only [ENTER] key is valid.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-97 3.34 . Windows PE T&D 3.34.1 Equipment Configuration for Test The following table indicates equipment configuration necessary for conduction of the tests items shown below using WinPE T&D.
Tests and Diagnostics 3-98 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.2 Starting T&D 3.34.2.1 Automatic Start When WindowsPE starts up from the TOSHIBA Test & Diagnostic CD or the USB memory, WinPE T&D starts automatically.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-99 3.34.3 Sy stem Information Menu If you set the TOSHIBA Test & Diagnostic CD to the ODD drive and run WinPE T&D, the following test selection screen is displayed.
Tests and Diagnostics 3-100 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.3.2 Details of the system information displayed on an information tree The details of the system information item displayed on each information tree are shown below.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-101 ● MEMORY The following item displays mem ory information of the PC. Item Description Physical Memory Displays the capacity (GB) of the physical memory on the PC ● NETWORK The following items displays network card information of the PC.
Tests and Diagnostics 3-102 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) ● ODD The following item displays ODD information of the PC. If m ore than one ODD is connected, the information of up to 4 ODDs are displayed. Item Description ODD0 - 3 Displays the nam e and the media type of the ODD connected to the PC.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-103 3.34.4 Test Menu This section explains the Diagnostics screen. 3.34.4.1 Explanation of each item ▼ [Multitask] check box Checking this box activates each test as multi-task.
Tests and Diagnostics 3-104 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) ▼ Testing time Updates the testing time and displays it in real tim e during the execution of the test. ▼ Test setting and Result This will be explained in section 3-4-2.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-105 Status Description Device not connected Peripheral device necessary for the test is not connected. USB flash memory, FDD and others m ay be connected to the PC.
Tests and Diagnostics 3-106 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.4.3 Test Procedure This section describes operation procedure of WinPE T&D. 1) Select the test item to run from Test Item and check it. (If you put a check mark in the ALL Item Check check box, all test items are checked.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-107 3.34.4.4 Display of Test Result If the test ends successfully or the [STOP] button is clicked, the following Result screen is displayed. After confirming the result, click the [C LOSE] button to close the screen.
Tests and Diagnostics 3-108 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 2) How to save log files The following is the procedure to save log files to an external media Test logs in the text format and HTML log files are saved to the external media.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-109 2-3) If a destination confirmation message is displayed, click the [OK] button. 2-4) If the log file is successfully saved to the destination, the following confirmation screen is displayed and click the [OK] button.
Tests and Diagnostics 3-110 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.5 Sy stem Utility Menu This section explains System Utility screen. 3.34.5.1 Explanation of Each Item ▼ Utility Item … A list of the utilities that this T&D supports ▼ Detail … Explanation of each utility is described.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-111 3.34.5.2 USB Memory Creation Tool If the system is booted using the USB mem ory created in 3-5-2, the following screen is displayed. Press the arrow keys to operate on the multi-boot screen.
Tests and Diagnostics 3-112 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) This utility extracts the contents of TOSHIBA Test & Diagnostic to the specified USB memory to provide the environm ent which allows you to start the test from the USB memory and conduct it.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-113 3.34.5.3 Display of SMART Information This utility lists the SMART information on the screen. Attribute and W orst values for each ID are also displayed. Since some HDDs do not have ID, these information are not displayed in that case.
Tests and Diagnostics 3-114 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Each ID and its details are listed in the following table. ID Attribute Name Description 1h Raw read error rate Read error rate Rate of errors which occur when the HDD reades data.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-115 C7h UltraDMA CRC error count Number of CRC errors occurred during data transference in the UltraDMA mode D.
Tests and Diagnostics 3-116 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.6 Details of Each Test Function 3.34.6.1 HDD Physical Test 1) Test content This test handles the HDDs to the PC as physical unit and conducts read test to the target HDD to check whether it works or not.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-117 ■ In the case of FAIL The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on the WinPE T&D screen. The detail of the error is printed to the log of WinPE T&D.
Tests and Diagnostics 3-118 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.6.2 HDD Logical Test 1) Test content This test first verifies that the files which exist on the drive recognized as the built-in HDD are read normally.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-119 3.34.6.3 Memory Test 1) Test content This test reserves free memory area in the m ain memory and performs Write, Read and Compare operation to the area to verify data validity.
Tests and Diagnostics 3-120 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3) Result judgment ■ In the case of PASS The PASS Count on the test screen is zoomed in and (OK) is displayed in the Result field on the WinPE T&D screen.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-121 3.34.6.4 USB Test 1) Test content This test accesses a file on the disk in the USB device (USB Flash Memory) to verify the file validity. Create a file with the specified size in the US B device and delete the file after creating it.
Tests and Diagnostics 3-122 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3) Result judgment This test is regarded as 1PASS when every acce ss to the files in all of the devices connected to the PC is successful. If an error occurs even in a device, the error count is incremented.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-123 3.34.6.5 ODD Test 1) Test content This test reads the test data in the CD inserted on the CD drive (External CD driver is also possible) to verify the data integrity.
Tests and Diagnostics 3-124 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) ■ In the case of PASS The PASS Count on the test screen is zoomed in and (OK) is displayed in the Result field on the WinPE T&D screen.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-125 3.34.6.6 WIRED LAN Test 1) Test content This test checks that normal comm unication can be performed with the built-in LAN card.
Tests and Diagnostics 3-126 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) ■ In the case of FAIL The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on the WinPE T&D screen. The detail of the error is printed to the log of WinPE T&D.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-127 3.34.6.7 CPU Test 1) Test content This test performs arithmetic operation test to the CPU to verify the CPU operation. The test processes ALU and FPU operations and allows you to check that the results are correct.
Tests and Diagnostics 3-128 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) The detail of the error is printed to the log of WinPE T&D. More details are as shown below. Message Explanation Remarks The ALU test made an error. An error occurred duringprocessing of ALU.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-129 3.34.6.8 VIDEO Test 1) Test content This test displays red, green, blue, white and black colors, circles, line gradation, ASCII characters and H pattern full screen.
Tests and Diagnostics 3-130 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.6.9 FDD Test 1) Test content This test accesses a file on a floppy disk and verifies that the access can be made correctly.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-131 Message Explanation Remarks Space Size Error. Code(xx) There is no sufficient free space for the file with the specified size. xx indicates error code. This message also appears when no floppy disk is in the floppy disk drive.
Tests and Diagnostics 3-132 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.6.10 IEEE1394 Test 1) Test content This test accesses a file in the IEEE1394 device and verifies that the access can be made correctly.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-133 the WinPE T&D screen. The detail of the error is printed to the log of WinPE T&D. More details are as shown below. Message Explanation Remarks File Access Error.
Tests and Diagnostics 3-134 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.6.11 TIMER Test 1) Test content Execute the test after adjusting the internal tim e and verify the accuracy of the tim er after it passes the year 2000.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-135 3) Result judgment Both of PASS and FAIL are not displayed anywhere on the TIMER screen.
Tests and Diagnostics 3-136 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.6.12 KEYBOARD Test 1) Test content The keyboard of PC is a test which judges whether it operates normally. ■ Simple Mode / Detail Mode The same operation is carried out whichever it chooses.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-137 1) If the press of a key is recognized correctly, the object key on a display will be eliminated. 2) When redoing a keyboard test, the "Refresh" button arranged at the screen lower left is pressed.
Tests and Diagnostics 3-138 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) The keyboard which can be tested is two kinds, "US Keyboard A4 Mode" and "US Keyboard A4 Mode+10Key Mode.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-139 3) Result judgment It is normal, if a keyboard test is done and all the keyboard layouts are eliminated. Press the "Pass" button with the judgment button at the upper right of a keyboard layout.
Tests and Diagnostics 3-140 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.34.6.13 Mouse Test 1) Test content The Mouse of PC is a test which judges whether it operates normally. ■ Simple Mode / Detail Mode The same operation is carried out whichever it chooses.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-141 1) There is a test item to 1-9 of a mouse test screen. If applicable m ouse operation is performed, a test item will disappear. Moreover, it is simultaneously displayed on the corresponding section of a right-hand side mouse illustration by coloring.
Tests and Diagnostics 3-142 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3) Result judgment When all the test items of a m ouse test disappear and it is normal, Please push the "Pass" button of a mouse test screen. Press the "Fail" button, when abnormal.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-143 3.35 DOS T&D 3.35.1 Configuration of Test Equipment The configuration of test equipment require d for executing FreeDOS T&D is as follows: Note: Start the machine after connecting the FDD.
Tests and Diagnostics 3-144 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) HDD ： Hard disk drive KB ： Keyboard FDD ： Floppy disk drive 3.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-145 3.35.1.3 Test program list The following table lists test items included in each test.
Tests and Diagnostics 3-146 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.35.2 How to start T&D 3.35.2.1 Diagnostics main menu Set the TOSHIBA Test & Diagnostic CD to the ODD drive and turn the power of the system on.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-147 3.35.2.2 Diagnostics test menu If you select [1] in the main menu, the following test screen is displayed. Use the Up or Down cursor key to select your desired test item and press the [Enter] key.
Tests and Diagnostics 3-148 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 2) HARD DISK TEST The following message will appear. Select the Hard Disk DRIVE to be tested, then press Enter.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-149 3.35.2.3 Sub test menu If you select any test item from “DIAGNOS TICS TEST MENU”, the following sub m enu is displayed. Use the Up or Down cursor key to select your desired item and press the [Enter] key.
Tests and Diagnostics 3-150 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.35.3 Test Operating Procedure If you select any test item from the subtest m enu and execute it, you are required to set the test mode. Set the test mode according to the following procedure.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-151 ［［ HALT OPERATION ］］ １： Test end …The test ended. Select a subtest. ２： Continue …The next step will be executed. ３： Retry …The error step will be retried.
Tests and Diagnostics 3-152 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.35.4 Error Code Status If an error occurs during any test, one of the following error codes is displayed.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-153 04 08 09 10 20 40 80 60 06 EE FDD - RECORD NOT FOUND FDD - DMA OVERRUN ERROR FDD - DMA BOUNDARY ERROR FDD .
Tests and Diagnostics 3-154 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.35.5 Task Function This T&D has three tasks, each of which has the following function. 3.35.5.1 Log Utilities （ Task #5 ） This function logs error information generated while a test is in progress and stores the results in RAM.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-155 3.35.5.2 Running Test （ Task #6 ） This test is a continuous test to be applied to the devices capable of unattended operation. The name of test device and the number of subtest being tested are displayed on the screen during a test.
Tests and Diagnostics 3-156 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.35.5.3 FD & HD Utilities （ Task #7 ） Run the utility on the floppy disk. If you select task No. [7], the following FDD utility selection menu is displayed.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-157 3.35.6 Detail of Each Test Function 3.35.6.1 System Test 1) DMI data read This subtest displays the inform.
Tests and Diagnostics 3-158 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Test data = CCAA5533H, 8000000H Step 2: Byte Enable Test Write the data byte by byte to the initial address of the data in 64KB units and the initial data + 4, then read double words of the written data and compare the result with the original data.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-159 With regard to the test mem ory content, save the data to the test memory before the test and restore it to the former address after the test.
Tests and Diagnostics 3-160 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) : JMP + Read and Compare Step 7: JMP ＋ Write (Address pattern 2) 1/4.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-161 3.35.6.3 Keyboard Test 1) Pressed key code display When a key is pressed, the scan code, character code, and key top name are displayed on the screen in the format shown below.
Tests and Diagnostics 3-162 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.35.6.4 Display test Move the highlight bar to the subtest you want to execute and press Enter . 1) VRAM Read / Write for VGA This subtest writes the constant data (AAAAh and 5555h) to the video RAM.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-163 3.35.6.5 Floppy Disk Test This subtest tests floppy disks. 1) Sequential read This subtest performs a Cyclic Redundancy Check (CRC) that continuously reads all the tracks (track: 0 to 39/0 to 79) on a floppy disk.
Tests and Diagnostics 3-164 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) ［ FDC Status ］ 0 1 2 3 4 5 6 FDC Status = XX XX XX XX XX XX 0 ： Result Status 0 1 ： Result Stat.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-165 ［ Result Status 1 ］ 7 6 5 4 3 2 1 0 EN DE OR ND NW MR EN ： End of Cylinder DE ： Data error OR ： .
Tests and Diagnostics 3-166 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.35.6.6 Hard Disk Test 1) Sequential read This subtest performs a forward read operation (0 to Maximum ) by 63 sectors. 2) Address uniqueness This subtest writes unique address data to each sector of the HDD track-by-track.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-167 5) Partial read This subtest reads 1GB data that is in minimum , middle and maximum address of the HDD area. 6) Write specified address This subtest writes specified data to a specified cylinder and head on the HDD.
Tests and Diagnostics 3-168 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) [HDC Status] : P – 1F7h Bit Name Function 7 BSY （ busy ） 0: HDC is ready. 1: HDC is busy. 6 DRY （ drive ready ） 0: HDD does not accept the com mand.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-169 [Error register] Ｐ – 1F1h Bit Name Function 7 BBK （ BadBlockMark ） 0: Not used 1: Defective block mark detection.
Tests and Diagnostics 3-170 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.35.6.7 Real timer test 1) Real time This subtest sets and displays the calendar or clock function.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-171 3.36 Maintenance (WinPE&FreeDos) Test Program Supplementary Information 3.36.1 Details of HTML Log File This section provides details of the HTML log file stored in the storage.
Tests and Diagnostics 3-172 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) Physical Memory Capacity (MB) of memory which is installed in PC NetWork0 Name of LAN card.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-173 3.36.1.3 Test Result The following table lists the test results. If an error occurs during a test, the line of the test on the screen is displayed in red color.
Tests and Diagnostics 3-174 [CONFIDENTIAL]) PORTÉGÉ R700 Series Maintenance Manual (960-833) ) 3.37 Maintenance (WinPE&FreeDos) Test Program Supplementary Information 3.
Tests and Diagnostics PORTÉGÉ R700 Series Ma intenance Manual (960-833) [CONFIDENTIAL]3-175 6) Boot Media If the system is booted from the CD when both the CD and the USB m emory that contain WinPE T&D are connected to the PC, T&D in the USB mem ory starts up.
[CONFIDENTIAL] Chapter 4 Replacement Procedures.
4 Replacement Procedures 4-ii [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manu al (960-833).
4 Replacement Procedures PORTÉGÉ R700 Maintenance Manual (960-83 3) [CONFIDENTIAL] 4-iii Chapter 4 Contents 4.1 Overview ............. .............. ................ ............. ................ ................ ............. .............. .4 - 1 4.
4 Replacement Procedures 4-iv [CONFIDENTIAL] PORTÉGÉ R700 Maintena nce Manual (960-833) Figures Figure 4-1 Removing the battery p ack ..................... .............. .. ... ............. ... ............. ... .. 4-10 Figure 4-2 Removing the SIM card .
4 Replacement Procedures PORTÉGÉ R700 Maintenance Manual (960-83 3) [CONFIDENTIAL] 4-v Figure 4-31 Removing the system board (4) .................... ............. ................ ............. ..... 4-52 Figure 4-32 Removing the system board (5) .
4 Replacement Procedures 4-vi [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manua l (960-833).
4.1 Overview 4 Replacement Procedures PORTÉG É R700 Maintenance Manu al (960-833 ) [CONFIDENTIAL] 4-1 4 Replacement Procedures 4.1 Overview CAUTION: The case and parts of this machine are delicate (t hin ) because this machine is lighter than a usual machi ne.
4 Replacement Procedures 4.1 Overview 4-2 [CO NFIDENTIAL] POR TÉGÉ R700 Maint enance Manual ( 960-833) Please prepare required parts in advance, when replacing the following items.
4.1 Overview 4 Replacement Procedures PORTÉG É R700 Maintenance Manu al (960-833 ) [CONFIDENTIAL] 4-3 The main parts in this manual are indicated in the part list by the following names.
4 Replacement Procedures 4.1 Overview 4-4 [CO NFIDENTIAL] POR TÉGÉ R700 Maint enance Manual ( 960-833) Safety Precautions Please read the following s afety instructions before disassembling the com puter and always follow the instructions while worki ng on the com puter.
4.1 Overview 4 Replacement Procedures PORTÉG É R700 Maintenance Manu al (960-833 ) [CONFIDENTIAL] 4-5 Before You Begin Take note of the following points before starting work. Always remove the AC adapter and battery pack before commenc ing any of the procedures.
4 Replacement Procedures 4.1 Overview 4-6 [CO NFIDENTIAL] POR TÉGÉ R700 Maint enance Manual ( 960-833) Disassembly Procedures Four main types of cable connector are used.
4.1 Overview 4 Replacement Procedures PORTÉG É R700 Maintenance Manu al (960-833 ) [CONFIDENTIAL] 4-7 Assembly Procedures After the computer has been disassemble d and the part that caused the f ault has been repa ired or r eplac e d, the com p uter m ust be reas sem bled.
4 Replacement Procedures 4.1 Overview 4-8 [CO NFIDENTIAL] POR TÉGÉ R700 Maint enance Manual ( 960-833) Screw Tightening Torque When you fasten screws, be sure to follow the torq ue list below.
4.1 Overview 4 Replacement Procedures PORTÉG É R700 Maintenance Manu al (960-833 ) [CONFIDENTIAL] 4-9 Grip Color Some screws ha ve a colored grip area to help you determ ine the length of the screw.
4 Replacement Procedures 4.2 Battery pack 4-10 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.2 Battery pack Removing the Battery pack To remove the battery pack, follow the s teps below and refer to Figure 4-1. CAUTION: When handling bat tery pack, be careful not to short circuit the terminal s.
4.2 Battery pack 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 11 Installing the Battery pack To install the battery pack, follow the steps below and refer to Figure 4-1. CAUTION: The battery pack is a lithium ion ba ttery, which can explode if no t properly replaced, used, handled or disposed of.
4 Replacement Procedures 4.3 SIM card 4-12 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.3 SIM card Removing the SIM card To remove the SIM card, follow the steps below a nd refer to Figure 4-2. 1. Release the hook . 2. Push th e SIM card .
4.4 ExpressCard 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 13 4.4 ExpressCard Removing the ExpressCard To remove the ExpressCard, follow the steps below and refer to Figure 4-3.
4 Replacement Procedures4.5 Bridge media (S D, mini SD, Micro SD Card/MultiM edi a Card) 4-14 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.5 Bridge media (SD, mini SD, Micro SD Car d/MultiMedia Card) Removing the Bridge media To remove the Bridge m edia, follow the steps below and refer to Figure 4-4.
4.6 Memory module 4 Re pl acement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 15 4.6 Memory module Removing the Me mory module To remove the mem ory module, confirm that the computer is shut down. Then follow the steps below and refer to Figure 4-5 and 4-6.
4 Replacement Procedures 4.6 Memory module 4-16 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 3. Open the left and right latches outside and re move the memory module .
4.6 Memory module 4 Re pl acement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 17 Installing the Memory module To install the mem ory module, conf irm that the computer is shut down. Then foll ow the steps below and refer to Figure 4-5 and 4-6.
4 Replacement Procedure s 4.7 HDD/SSD 4-18 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.7 HDD/SSD CAUTION : Take care not t o press on the top or bottom of the HDD or SSD. Pressure may cause data loss or damage to the device. 4.7.1 HDD/SSD (2.
4.7 HDD/SSD 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 19 3. Turn up the insulator . 4. Lift up the HDD/SSD from the slot. 5. Disconnect the HDD/SSD from the conn ec tor on t h e HDD/SSD FPC . Figure 4-8 Removing th e HDD/SSD (2.
4 Replacement Procedure s 4.7 HDD/SSD 4-20 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.7.2 SSD (1.8-inch) Removing the SSD (1.8-inch) To remove the SSD (1.8-inch), follow the step s below and refer to Figure 4-7, 4-9 and 4-10. 1. Loosen the screws fixing the HDD/SSD cover.
4.7 HDD/SSD 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 21 6. Rem ove the following scre ws securing the SSD . • M1.4 × 3B S-THIN HEAD × 4 7. Rem ove the SSD from the SSD holder . Figure 4-10 Removing the SSD (1.
4 Replacement Procedures 4.8 Base assembly 4-22 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.8 Base assembly Removing the Base assembly To remove the base asse mbly, follow the steps below a nd refer to Figure 4-11 to 4-13. 1. Take out the tab under the base assembly.
4.8 Base assembly 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 23 3. Rem ove the following scre ws securing the base assembly and cover assembly. Dock model • M2.5 × 6B FLAT HEAD screw × 15 (Descr ibed as “6 ” in the figu re) • M2.
4 Replacement Procedures 4.8 Base assembly 4-24 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4. Remove the base assembly in the direction as shown in the figure below.
4.8 Base assembly 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 25 Installing the Base assembly To install the base as sembly, follow the steps below and refer to Figure 4-11 to 4-13. 1. Set the base assembly to the cover assembly.
4 Replacement Procedures 4.9 ExpressCard slot 4-26 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.9 ExpressCard slot Removing the ExpressCard slot To remove the ExpressCard slot, follow the steps below and refer to Figure 4-14. 1. Remove the f ollowing screws securing the ExpressCard slot.
4.9 ExpressCard slot 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 27 Installing the ExpressCard slot To install the ExpressCard slot, follow th e steps below and refer to Figure 4-14. 1. Set the ExpressCard slot to the base assem b ly and secure it with the following screws .
4 Replacement Procedures 4.10 Battery lock 4-28 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.10 Battery lock Removing the Battery lock To remove the battery lock, follow th e steps below and refer to Figure 4-15. 1. Remove the battery locks while pu shing ho oks inside to release them.
4.11 3G card 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 29 4.11 3G card Removing the 3G card To remove the 3G card, follow the steps below and refer to Figure 4-16 to 4-18. 1. Disconnect the sound board FPC from the con n ector CN9670 o n the sound board and CN9570 on the system board.
4 Replacement Procedures 4.11 3G card 4-30 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 2. Remove the f ollowing screws securing the 3G board . • M2 × 4C S-THIN HEAD screw × 3 3. Disconnect the 3G board FPC from the connector CN9720 on the 3G boa rd.
4.11 3G card 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 31 5. Rem ove the following screws and disconnect the 3G card from the connector on the 3G boa r d.
4 Replacement Procedures 4.11 3G card 4-32 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) Installing the 3G card To install the 3 G card, fo llow the steps below and refer to Figure 4-16 to 4-18. 1. Insert the 3G car d to the connector on the 3G board slantwise and press it to connect firmly.
4.12 Optical disk drive (DVD-Super Multi dri ve)/SD board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 33 4.12 Optical disk drive (DVD -Super Multi drive)/SD board Removing the Optical disk drive/SD board To remove the optical disk drive/SD board, fo llow the steps below and refer to Figure 4-19 to 4-22.
4 Replacement Procedures 4.12 Optical di sk drive (DVD-Super Multi drive)/SD board 4-34 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 2. Remove the following screws se curing the SD board. • M2 × 3B S-THIN HEAD × 4 3. Disconnect the inner harness from the conn ec tor CN6070 on the back of the SD board.
4.12 Optical disk drive (DVD-Super Multi dri ve)/SD board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 35 5.
4 Replacement Procedures 4.12 Optical di sk drive (DVD-Super Multi drive)/SD board 4-36 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 6.
4.12 Optical disk drive (DVD-Super Multi dri ve)/SD board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 37 Installing the optical disk drive/SD board To install the optical disk drive/SD board, foll ow the steps below and refer to Figure 4-19 to 4-22.
4 Replacement Procedures 4.13 Wireless LAN card 4-38 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.13 Wireless LAN card Removing the Wireless LAN card To remove the wireless LAN card, follow the steps be low and refer to Figure 4-23.
4.13 Wireless LAN card 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 39 Installing the Wireless LAN card To install the wireless LAN card, follow the steps below and refer to Figure 4-23.
4 Replacement Procedures 4.14 DC fan 4-40 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.14 DC fan Removing the DC fan To remove the DC fan, follow the steps below and ref er to Figure 4-24. 1. Peel off th e insulator and remove the f ollowing screws securing the DC fan.
4.14 DC fan 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 41 Installing the DC fan To install the DC fan, follow the steps below and refer to Figure 4-24. 1. Connect the fan harness to the connector CN3380 on the system board.
4 Replacement Procedures 4.15 E-SATA board 4-42 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.15 E-SATA board Removing the E-SATA board To remove the E-SATA board, follow the steps below and refer to Figure 4-25. 1. Remove the f ollowing screw and E-SATA board .
4.15 E-SATA board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 43 Installing the E-SATA board To install the E-SATA board, follow the steps be low and refer to Figure 4-25. 1. Peel off the double-side tape (D-tape circle) on the cover assembly.
4 Replacement Procedures 4.16 Fin 4-44 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4 Replacement Procedures 4.16 Fin Removing the Fin To remove the fin, f ollow the steps below and refer to Figure 4-26. 1. Remove the following screws and fin .
4.16 Fin 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 45 Installing the Fin To install the fin, follow the steps below and refer to Figure 4-26. 1. When silicon grease is already applied to the CPU, wipe them of f with a cloth in advance.
4 Replacement Procedures 4.17 Bluetooth module 4-46 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.17 Bluetooth module Removing the Bluetoo th mo dule To remove the Bluetooth module, f ollow the steps below and refer to Figure 4-27. 1.
4.17 Bluetooth module 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 47 Installing the Bluetooth module To install the Bluetooth module, follow the steps below and ref er to Figure 4-27. 1. Connect the Bluetooth harness to the connector on the Bluetooth module.
4 Replacement Procedures 4.18 System board 4-48 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.18 System board CAUTION: When replaci ng with a new system board , th e following procedures must be executed. (1) Before replacing the system board, execute subtes t02 “DMI ggg information save” in 3.
4.18 System board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 49 Removing the System board To remove the system board, follow the step s below and refer to Figure 4-28 to 4-32. 1. Turn up the insula tor and take out the RJ45 harne ss from the s lot.
4 Replacement Procedures 4.18 System board 4-50 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 2. Turn up the insulator and disconnect the LCD harness from the connector CN53 00 on the system board. 3. Disconnect the DC- IN harness from the connector CN8800 on the system board.
4.18 System board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 51 4. Disconnect the keyboard FPC , TP SW FFC and fingerprint sensor board FFC from the connectors CN3230 , CN9550 and CN9551 on the system board.
4 Replacement Procedures 4.18 System board 4-52 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 5. Remove the following screws se curing the system board. • M2 × 4C S-THIN HEAD × 2 • 4-40 × 5C UNIFIED BIND × 2 6. Remove the system board .
4.18 System board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 53 7. Disconnect the SD board FPC , HDD FPC (or SSD FPC ), E-SATA board FPC , RJ45 harness , RTC batt er y harness and 3G bo ard FPC from the con necto rs CN9770 , CN1990 , CN9540 , CN4050 , CN930 0 and CN9580 on the system board.
4 Replacement Procedures 4.18 System board 4-54 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) Installing the System board To install the system board, follow the st eps below and refer to Figure 4-28 to 4-32.
4.19 Sound board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 55 4.19 Sound board Removing the Sound board To remove the sound board, follow the steps below and ref er to Figure 4-33 to 4-35. 1. Rem ove the following screw and speaker holder R .
4 Replacement Procedures 4.19 Sound board 4-56 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 3. Remove the following screw and sound board .
4.19 Sound board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 57 4. Peel off the acetate tape and turn up the insulator .
4 Replacement Procedures 4.19 Sound board 4-58 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) Installing the Sound board To install the sound board, follow the steps below and refe r to Figure 4-33 to 4-35. 1. Turn up the insulator a nd arrange the inner harness in place.
4.20 Speaker 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 59 4.20 Speaker Removing the Speaker To remove the speaker, follow the steps below and refer to Figure 4-36 and 4-37. 1. Turn up the insula tor and release the wireless LAN antenna cable and speaker harness .
4 Replacement Procedures 4.20 Speaker 4-60 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 3. Take out the speak er from the slot of the cover assembly.
4.20 Speaker 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 61 Installing the Speaker To install the speaker, follow the steps below and refer to Figure 4-36 and 4-37. 1. Set the speaker to the slot of the cover assembly.
4 Replacement Procedures 4.21 DC-IN harness 4-62 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4.21 DC-IN harness Removing the DC-IN harness To remove the DC-IN harness, follow th e steps below and refe r to Figure 4-38. 1. Take out the DC-IN harness from the slot of the cover asse mbly.
4.22 Touch pad/Fi ngerprint sensor board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 63 4.22 Touch pa d/Fingerprint sensor boar d Removing the Touch pad/Fingerprint sens or board To remove the touch pad/fingerprint sensor board, follow the steps below and refer to Figure 4-39 to 4-41.
4 Replacement Procedures 4.22 T ouch pad/Fingerprint sensor board 4-64 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) 4. Peel off the insulator . 5. Release the latches and remove the touch pad and touch pad button cover adh ered with the double-sided tape.
4.22 Touch pad/Fi ngerprint sensor board 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4- 65 6. Peel off the aluminum tape (AL TAPE) and peel off the fingerprint sensor board . 7. Rem ove the following screws and T-PAD board .
4 Replacement Procedures 4.22 T ouch pad/Fingerprint sensor board 4-66 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) Installing the Touc h pad/Fingerprint sensor board To install the touch pad/fingerprint sensor boa rd, f ollow the steps below and refer to Figure 4-39 and 4-41.
4.23 Keyboard 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-67 4.23 Keyboard Removing the Keyboard To remove the keyboard, follow the steps below and refer to Figu re 4-42. 1. Rem ove the aluminum tape (AL TAPE) f rom the back of the c over assembly.
4 Replacement Procedures 4.23 Keyboard 4-68 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) Installing the Keyboard To install the keyboard, follow the steps below and ref er to Figure 4-42. 1. Stick a new in sulator (KB INSULATOR) on the cover assembly.
4.24 Cover assembly/LCD assembly 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-69 4.24 Cover assembly/L CD assembly Removing the Cover assembly/LCD assembly To remove the cover assembly/LCD assem bly, follow the steps below and refer to Figure 4- 43 and 4-44.
4 Replacement Procedures 4.24 Cover assembly/LCD assembly 4-70 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) 4. Release the latch and remove the appli button . 5. Remove the sensor board and sensor harness from the appli button. 6. Release the latch and re move the PW SW button .
4.24 Cover assembly/LCD assembly 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-71 Installing the Cover assembly/LCD assembly To install the cover asse mbly/LCD assembly, follow the steps below and ref er to Figure 4-43 and 4-44.
4 Replacement Procedures 4.24 Cover assembly/LCD assembly 4-72 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) NOTE: When replacing a Cover ASSY with a new one, stick the INSULATOR COVER and INSULATOR COVER B to the Cover ASSY in place.
4.24 Cover assembly/LCD assembly 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-73.
4 Replacement Procedures 4.24 Cover assembly/LCD assembly 4-74 [CONFI DENTIAL] PO RTÉGÉ R70 0 Maintenance Manual (960-833) Please prepare required parts in advanc e, when replac ing the fo llowing ite m.
4.25 LCD 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-75 4.25 LCD Removing the LCD To remove the LCD, follow the steps below and refer to Figure 4-45 to 4-48. 1. Rem ove the hinge cap L and hinge cap R fro m the LCD mask.
4 Replacement Procedures 4.25 LCD 4-76 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) 2. Peel off three LCD cushions and one LCD mask seal from the LCD m a sk. 3. Remove the following screws se curing the LCD mask. • M2 × 2.3B S-THIN HEAD screw × 4 • M2 × 6B Stepping screw × 2 4.
4.25 LCD 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-77 5. Turn up the insula tor and remove the LCD from the LCD cov er.
4 Replacement Procedures 4.25 LCD 4-78 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) 6. Turn up the insulator and disconnect the LCD harness from the LCD (thick type of the LCD from the back and thin type of the LCD f rom the fr ont).
4.25 LCD 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-79 Installing the LCD To install the LCD, follow the s teps below and refer to Figure 4-45 to 4-48.
4 Replacement Procedures 4.25 LCD 4-80 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) 4. Set th e LCD mask to the LCD cover while engaging the latche s and secure them with the following screws . • M2 × 2.3B S-THIN HEAD screw × 4 • M2 × 6B Stepping screw × 2 NOTE: When installing a LCD MASK, refer to the followi ng figure.
4.25 LCD 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-81 NOTE: When replacin g a LCD mask with a new one, stick a camera panel to the LCD mask in place. (For the camera module model ) 5. Stick three LCD cushions and on e LCD mask seal in p lace.
4 Replacement Procedures 4.26 Camera module 4-82 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) 4.26 Camera module Removing the Camera module To remove the cam era module, follow the steps below and refer to Figure 4-49. 1. Turn up the insulator and disconnect the camera harn ess f rom the connector on the camera mo du le.
4.26 Camera module 4 Replacement Pro cedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-83 Installing the Camera module To install the cam era module, follow the steps below and ref er to Figure 4-49. 1. Stick a new D-stick tape to the LCD cover and peel off the s eparator.
4 Replacement Procedures 4.27 Wireless LAN anten na/Bluetooth ant enna/3G antenna 4-84 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) 4.
4.27 Wireless LAN antenna/Bluetoot h anten na/3G antenna 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-85 Figure 4-51 Removing the wireless LAN antenna/Bl uetooth ant enn a/3G antenna (Without 3G model) Please prepare required parts in advance, when replacing the following items.
4 Replacement Procedures 4.27 Wireless LAN anten na/Bluetooth ant enna/3G antenna 4-86 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) 3. Arrange the wireless LAN a ntenna, Bluetooth antenna, 3G ante nna and camera harness and fix them with th e insul ators .
4.27 Wireless LAN antenna/Bluetoot h anten na/3G antenna 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-87 When sticking W-LAN ANTENA, 3G ANTENNA or BLUETOOTH ANTENNA, refer to the following figures.
4 Replacement Procedures 4.27 Wireless LAN anten na/Bluetooth ant enna/3G antenna 4-88 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833).
4.27 Wireless LAN antenna/Bluetoot h anten na/3G antenna 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-89.
4 Replacement Procedures 4.27 Wireless LAN anten na/Bluetooth ant enna/3G antenna 4-90 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833) When sticking INSU SQUARE, refer to the followi ng figures.
4.27 Wireless LAN antenna/Bluetoot h anten na/3G antenna 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-91 When laying and holdi ng cables, refer to the followi ng figure.
4 Replacement Procedures 4.27 Wireless LAN anten na/Bluetooth ant enna/3G antenna 4-92 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833).
4.28 Hinge 4 Replacement Procedures PORTÉG É R700 Maintenance Manual (960-8 33) [CONFIDENTI AL] 4-93 4.28 Hinge Removing the Hinge To remove the hinge, follow the steps below and refer to Figure 4-52. 1. Rem ove the following screws sec uring the hi nges.
4 Replacement Procedures 4.28 Hinge 4-94 [CONFI DENTIAL] PO RTÉGÉ R700 Ma intenance Manual ( 960-833).
[CONFIDENTIAL] Appendices.
Appendices App-ii [CONFIDENTIAL] PORTÉG É R700 Series Maintenance Manual (960-833).
Appendices PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] App-iii Appendix Content s Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout ........
Appendices App-iv [CONFIDENTIAL] PORT ÉGÉ R700 Series Maintenance Manual (960-833) C.15 CN8810 Battery connector (10-pin) ................................................................... C-16 C.16 CN9300 R TCVCC interface connector (3-pin) ......
Appendices PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] App-v 3G/SIM board (FUL3G*) C.38 CN9720 System board interface connector (25-pin) ........................................... C-30 C.39 CN2610 PCI-E Mini(3G) CARD interface connector (52-pin) .
Appendices App-vi [CONFIDENTIAL] PORT ÉGÉ R700 Series Maintenance Manual (960-833) Appendix I Reli ability ........................................................................................................ ... I-1 Figures Figure B-1 System board (FULSY* layout (front) .
Appendices PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] App-vii System board (FULSY*) T able C-1 CN1400 Memory A connector(200-pin) ......................................................... C-1 T able C-2 CN1410 Memory B connector (200-pin) .
Appendices App-viii [CONFIDENTIAL] PORT ÉGÉ R700 Series Maintenance Manual (960-833) T able C-27 CN3240 T ouch Pad interface connector (12-pin).......................................... C-25 T able C-28 CN9650 System board interface connector (14-pin).
Appendices PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] App-ix GMR sensor (LID) board (FULPS*) T able C-49 CN3270 FULSN* board interface connector (3-pin) .................................... C-39 T able D-1 Scan codes (set 1 and set 2) .
Appendix A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly. Observe the following precautions when handling the LCD module: 1.
Appendices Appendix A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with co tton or a soft cloth. If it is still dirty, try breathing on the surface to create a light cond ensate and wipe it again. If the surface is very dirty, we recomme nd a CRT cleaning agent.
Appendix A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge.
Appendices Appendix A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.
Appendix A Handling the LCD Module Appendices 10. If you transport the module, do not use pack ing material that c ontains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization.
Appendices Appendix A Handling the LCD Module A - 6 [CONFIDENTIAL] PORTÉGÉ R700 Series Maintenance Manual (960- 833).
Appendix B Boar d Layout Appendices Appendix B Board Layout B.1 System board (FULSY*) Front V iew Figure B-1 System board (FULSY* layout (front) PORT É G É R700 Series Maintenance Manual ( 960-833) .
Appendices Appendix B Boar d Layout B-2 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) T able B-1 System board (FULSY*) connectors and ICs (front) Number Name CN1900 SA T A HDD i.
Appendix B Boar d Layout Appendices B.2 System board (FULSY*) Back V iew Figure B-2 System board (FULSY*) layout (back) PORT É G É R700 Series Maintenance Manual ( 960-833) [CONFIDENTIAL] B-3.
Appendices Appendix B Boar d Layout B-4 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) T able B-2 System board (FULSY*) connectors and ICs (back) Number Name CN1400 Memory A conn.
Appendix B Boar d Layout Appendices B.3 eSA T A/HDMI/USB board (FULES*) V iew (front) (back) Figure B-3 eSA T A/HDMI/USB boar d (FULES*) layout (front/back) T able B-3 eSA T A/HDMI/USB board (FULES*) .
Appendices Appendix B Boar d Layout B.4 T ouch Pad/LED Button board (FUL TP*) View (front) (back) Figure B-4 Touch Pad/LED Button board (FULTP*) layout (front/back) T able B-4 Touch Pad/LED Button boa.
Appendix B Boar d Layout Appendices B.5 Finger sensor board (FULFS*) V iew (front) (back) Figure B-5 USB board (F GQUS*/ FGWUS* layout (front /back ) T able B-5 USB board (FGQU S*/ FGWUS*) connector (.
Appendices Appendix B Boar d Layout B.6 Sound/USB board (FULSN*) V iew: (front) (back) Figure B-6 Sound/USB board (FULSN*) layout (front /back ) T able B-6 Sound/USB board (FULSN*) connector ( back ) .
Appendix B Boar d Layout Appendices B.7 3G/SIM board (FUL3G*) V iew: (front) (back) Figure B-7 Sound/USB board (FULSN*) layout (front /back ) T able B-7 JACK/3G/Express boar d (FGQJK*/ FGWJK*) connect.
Appendices Appendix B Boar d Layout B.8 SD/P A T A ODD board (FULSD*) View: (front) (back) Figure B-8 SD/P A T A ODD board (FULSD*layout (front /back ) Table B-8 SD/PATA ODD board (FULSD*connector (fr.
Appendix B Boar d Layout Appendices B.9 SD/SA T A ODD board (FULSA*) View: (front) (back) Figure B-9 SD/SA T A ODD board (FULSA*) layout (front/back) Table B-9 SD/SATA ODD board (FULSA*) connector (fr.
Appendices Appendix B Boar d Layout B.10 GMR sensor (LID) board (FULPS*) View: (front) (back) Figure B-10 GMR sensor (LID) bo ard (FULPS*) layout (front/back) T able B-10 GMR sensor (LID) boar d (FULP.
Appendix B Boar d Layout Appendices PORT É G É R700 Series Maintenance Manual ( 960-833) [CONFIDENTIAL] B-13.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [CONFIDENTIAL] C- 1 Appendix C Pin Assignments System board (FULSY*) C.1 CN1400 Memory A connector(200-pin) Table C- 1 Memory A connector (200-pin) (1/3) Pin No.
Appendices Appendix C Pin Assignments C-2 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) Table C-1 Memory A connector (200-pin) (2/3) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-3 Table C-1 Memory A connector (200-pin) (3/3) Pin No.
Appendices Appendix C Pin Assignments C-4 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.2 CN1410 Memory B connector (200-pin) Table C- 2 Memory B connector (200-pin) (1/3) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-5 Table C-2 Memory B connector (200-pin) (2/3) Pin No.
Appendices Appendix C Pin Assignments C-6 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) Table C-2 Memory B connector (200-pin) (3/3) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-7 C.3 CN1900 SATA HDD/SSD interface connector (25-pin) Table C- 3 SATA HDD/SSD interface connector (25-pin) Pin No.
Appendices Appendix C Pin Assignments C-8 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.4 CN2110 PC CARD interface connector (80-pin) Table C- 4 PC CARD interface connector (80-pin) (1/2) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-9 Table C-4 PC CARD interface connector (80-pin) (2/2) Pin No.
Appendices Appendix C Pin Assignments C-10 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.5 CN2300 DOCKING interface connector (100-pin) Table C- 5 DOCKING interface connector (100-pin) (1/2) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-11 Table C-5 DOCKING interface connector (100-pin) (2/2) Pin No.
Appendices Appendix C Pin Assignments C-12 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.6 CN2520 EXPRESS CARD interface connector (40-pin) Table C- 6 EXPRESS CARD interface connector (40-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-13 C.7 CN2600 PCI-E Mini CARD interface connector (52-pin) Table C- 7 PCI-E Mini CARD interface connector (52-pin) Pin No. Signal Name Pin No.
Appendices Appendix C Pin Assignments C-14 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.8 CN3230 Keyboard interface connector (30-pin) Table C- 8 Keyboard interface connector (30-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-15 C.11 CN4440 Bluetooth interface connector (6-pin) Table C- 11 Bluetooth2 interface connector (6-pin) Pin No. Signal Name Pin No. Signal Name 1 BT-P3V 2 GND 3 ZUSBBT-E3P 4 ZUSBBT-E3N 5 BTRFON-S3N 6 BTMDL-E3N C.
Appendices Appendix C Pin Assignments C-16 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.13 CN5400 CRT interface connector (15-pin) Table C-13 CRT interface connector (15-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-17 C.16 CN9300 RTCVCC interface connector (3-pin) Table C- 16 RTCVCC interface connector (3-pin) Pin No. Signal Name Pin No. Signal Name 1 R3V 2 NC 3 GND 1T GND 2T GND C.
Appendices Appendix C Pin Assignments C-18 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.18 CN9550 FULTP* board interface connector (20-pin) Table C- 18 FULTP*board interface connector (20-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-19 C.20 CN9570 FULSN* board interface connector (50-pin) Table C- 20 FULSN* board interface connector (50-pin) Pin No.
Appendices Appendix C Pin Assignments C-20 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.21 CN9580 FUL3G* board interface connector (25-pin) Table C- 21 FUL3G* board interface connector (25-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-21 C.22 CN9700 FULSD*/ FULSA*board interface connector (50- pin) Table C- 22 FULSD*/ FULSA* board interface connector (50-pin) Pin No. Signal Name Pin No.
Appendices Appendix C Pin Assignments C-22 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) eSATA/HDMI/USB board (FULES*) C.23 CN9640 System board interface connector (50-pin) Table C- 23 System board interface connector (50-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-23 C.24 CN1970 eSATA/USB interface connector (11-pin) Table C- 24 eSATA/USB interface connector (11-pin) Pin No.
Appendices Appendix C Pin Assignments C-24 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.26 CN4610 USB interface connector (4-pin) Table C- 26 USB interface connector (4-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-25 Touch Pad/LED Button board (FULTP*) C.27 CN3240 Touch Pad interface connector (12-pin) Table C- 27 Touch Pad interface connector (12-pin) Pin No.
Appendices Appendix C Pin Assignments C-26 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) Finger sensor board (FULFS*) C.29 CN3650 System board interface connector (6-pin) Table C- 29 System board interface connector (6-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-27 Sound/USB board (FULSN*) C.30 CN9670 System board interface connector (50-pin) Table C- 30 System board interface connector 50(-pin) Pin No.
Appendices Appendix C Pin Assignments C-28 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.31 CN4630 USB interface connector (4-pin) Table C- 31 USB interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name 1 UP1VBS-E5V 2 ZUSBP1-E3N 3 ZUSBP1-E3P 4 GND 1T GND 2T GND 3T GND C.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-29 C.35 J6310 Headphone connector (6-pin) Table C- 35 Headphone connector (6-pin) Pin No. Signal Name Pin No. Signal Name 1 HEADR-PXP 2 3 NC 4 HEADL-PXP 5 A-GND 6 DETCTA-P4N C.
Appendices Appendix C Pin Assignments C-30 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) 3G/SIM board (FUL3G*) C.38 CN9720 System board interface connector (25-pin) Table C- 38 System board interface connector (25-pin) Pin No. Signal Name Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-31 C.39 CN2610 PCI-E Mini(3G) CARD interface connector (52-pin) Table C- 39 PCI-E Mini(3G) CARD interface connector (52-pin) Pin No. Signal Name Pin No.
Appendices Appendix C Pin Assignments C-32 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.40 IS2621 SIM board interface connector (9-pin) Table C- 40 SIM board interface connector (9-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-33 SD/PATA ODD board (FULSD*) C.41 CN9710 System board interface connector (50-pin) Table C- 41 System board interface connector (50-pin) Pin No.
Appendices Appendix C Pin Assignments C-34 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.42 CN1820 PATA ODD interface connector (50-pin) Table C-42 PATA ODD interface connector (50-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-35 C.43 IS2130 SD Card interface connector (12-pin) Table C-43 SD Card interface connector (12-pin) Pin No.
Appendices Appendix C Pin Assignments C-36 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) SD/SATA ODD board (FULSA*) C.45 CN9710 System board interface connector (50-pin) Table C- 45 System board interface connector (50-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-37 C.46 CN1900 SATA ODD interface connector (25-pin) Table C- 46 SATA ODD interface connector (25-pin) Pin No.
Appendices Appendix C Pin Assignments C-38 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833) C.48 CN6070 Digital Mic interface connector (12-pin) Table C-48 Digital Mic interface connector (12-pin) Pin No.
Appendix C Pin Assignments Appendices PORT É G É R700 Series Maintenance Manual (960-833) [ CONFIDENTIAL] C-39 GMR sensor (LID) board (FULPS*) C.49 CN3270 FULSN* board interface connector (3-pin) Table C- 49 FULSN* board interface connector (3-pin) Pin No.
Appendices Appendix C Pin Assignments C-40 [CONFIDENTIAL] PORT É G É R700 Series Maintenance Manual (960-833).
Appendix D Keyboard Scan/Character Codes Appendices PORTÉGÉ R7 00 Series Main tenance Manu al (960-833) [CONFIDENTI AL ] D-1 Appendix. D Appendix D Keyboard Scan/Character Codes D.1 Scan Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No.
Appendices Appendix D Keyboard Scan/Character Codes D-2 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenan ce Manua l (960-833) Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No.
Appendix D Keyboard Scan/Character Codes Appendices PORTÉGÉ R7 00 Series Main tenance Manu al (960-833) [CONFIDENTI AL ] D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No.
Appendices Appendix D Keyboard Scan/Character Codes D-4 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenan ce Manua l (960-833) Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No.
Appendix D Keyboard Scan/Character Codes Appendices PORTÉGÉ R7 00 Series Main tenance Manu al (960-833) [CONFIDENTI AL ] D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No.
Appendices Appendix D Keyboard Scan/Character Codes D-6 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenan ce Manua l (960-833) Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No.
Appendix D Keyboard Scan/Character Codes Appendices PORTÉGÉ R7 00 Series Main tenance Manu al (960-833) [CONFIDENTI AL ] D-7 Table D-5 Scan codes in overlay mode Code set 1 Code s et 2 Cap No.
Appendices Appendix D Keyboard Scan/Character Codes D-8 [CONFIDENTIA L] PORTÉGÉ R700 Series Maintenan ce Manua l (960-833) Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Co mmo n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.
Appendix E Key Layout Appendices 4 Appendix E Key Layout E.1 United Kingdom (UK) Keyboard Figure E-1 UK keyboard E.2 United States (US) Keyboard Figur e E-2 US keyboar d PORT É G É R700 Series Maint.
Appendices Appendix E Key Layout E-2 [CONFIDENTIAL] PORTÉGÉ R700 Series Maintenance Manual (960-833).
Appendix F W iring diagrams Appendices 4 Appendix F Wiring diagrams F.1 RGB Monitor Loopback Connector Figur e F-1 RGB Monitor Loopback Connector F.2 LAN Loopback Connector Figur e F-2 LAN Loopback Co.
Appendices Appendix F W iring diagrams F-2 [CONFIDENTIAL] PORTÉGÉ R700 Series Maintenance Manual (960-833) ).
Appendix G BIOS r ewrite procedur es Appendices Appendix G Appendix G BIOS Rewrite Procedures This Appendix explains how to rewrite th e system BIOS program when you update the system BIOS. Tools T o rewrite the BIOS, you need the following tool: BIOS/EC/KBC rewriting disk Rewriting the BIOS 1.
Appendices Appendix G BIOS r ewrite pr ocedur es G-2 [CONFIDENTIAL] PORTÉGÉ R700 Series Ma intenance Manual (960-833).
Appendix H EC/KBC r ewrite procedur es Appendices PORTÉGÉ R700 Series Maintenance Manual (960-833)) [CONFIDENTIAL] H-1 Appendix H Appendix H EC/KBC Rewrite Procedures This Appendix explains how to rewrite th e EC/KBC system program when you update the EC/KBC system.
Appendices Appendix H EC/KBC r ewrite procedur es H-2 [CONFIDENTIAL] PORTÉGÉ R700 Series Maintenance Manual (960-833)).
Appendix I Reliability Appendices PORTÉGÉ R700 Series Maintenance Manu al (96 0-833)CONFIDENTIAL] I-1 Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures ) in maximum configuration. Table I-1 MTBF Time (hours) Altair10 6683.
Appendices Appendix I Reliability I-2 [CONFIDENTIAL] PORTÉGÉ R700 Series Maintenance Manual (960- 833).
An important point after buying a device Toshiba r700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba r700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba r700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba r700 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba r700 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba r700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba r700.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba r700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba r700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
