Instruction/ maintenance manual of the product B512DSP Behringer
Go to page of 12
EUROLIVE B512DSP User manual A50-65813-00003.
2 EUROLIVE B512DSP V entilation: The appliance should be situated so that its location or position does not interfere with its proper ventilaton. For example, the appliance should not be situated on a.
3 EUROLIVE B512DSP B 51 2 DSP EUROLIVE Digital Processor-Controlled 600-Watt 12" PA Speaker System with Integrated Mixer s High-power 600-Watt 2-way PA sound reinforcement speaker system with int.
4 EUROLIVE B512DSP T able of content s 1. Introduction ............................................................... 5 1. 1 Before you get started ................................................... 5 1.1.1 Shipment .................................
5 EUROLIVE B512DSP 1. Introduction 1.1.3 Online registration Please remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com and read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible.
6 EUROLIVE B512DSP 2. Control elements and connections 2. Control elements and connections Fig. 2.1: Control elements and connections The LINE OUT XLR jack provides the signal with no additional gain applied in order to connect another loudspeaker, for example.
7 EUROLIVE B512DSP 4. Setting up the B512DSP OFF If the switch is not actuated (OFF position) then the speaker remains switched on and can only be deactivated via the POWER switch . A noise-gate allows you to eliminate unwanted noise during signal pauses.
8 EUROLIVE B512DSP 4. Application examples 4. Application examples 4.1 Presentations With just one B512DSP and one or two dynamic microphones, you can set up a basic audio system with very little effort. Thanks to the built-in mixer section, you can connect the microphones directly to the B512DSP.
9 EUROLIVE B512DSP Linking several B512DSP: If you need more sound pressure, for example in larger rooms, simply increase the number of loudspeakers on each stereo side. You could place two B512DSP on each stereo side and interconnect them (see Fig. 4.
10 EUROLIVE B512DSP 6. SPECIFICATIONS AUDIO INPUTS MIC/LINE (2) XLR (balanced) Input impedance 27 kOhm Sensitivity -40 to +10 dBu AUDIO OUTPUTS LINE OUT XLR (balanced) Output impedance 120 Ohm PROCESS.
11 EUROLIVE B512DSP 7. Warranty 7. Warranty § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION Responsible party name: BEHRINGER USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
An important point after buying a device Behringer B512DSP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer B512DSP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer B512DSP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer B512DSP you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer B512DSP will certainly help you make a decision on the purchase.
If you already are a holder of Behringer B512DSP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer B512DSP.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer B512DSP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer B512DSP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
