Instruction/ maintenance manual of the product NC1 Toshiba
Go to page of 6
nC 1 D r ive ADJUST ABLE SPEED DRIVES.
The nC1 is a sub-micro, or nano-sized drive with a full range of featur es to meet the needs of nearly any user . The nC1 is designed to be a simple drop in r eplacement for a starter on an existing project or as a new installation. Either way , the nC1’ s small size and full featured design make it a perfect choice for your application.
Easy-to-Use Easy T o Pr ogram The nC1 uses a simple, straightforward pr ogramming menu for quick and easy setup of the drive. There ar e no complicated sub menus or “hidden” parameters. By using the built-in programming wizar ds, the nC1 can be programmed for simple operations with the push of a button.
nC1 Drive CHARGE Lamp MONITOR Key RUN Lamp STOP Key ENTER Key DOWN Key UP Key PROGRAM Lamp Display Built-In Potentionmenter Indicates that high voltage is still present within the inverter . Do not open the cover while this is lit. Lights when an ON command is issued but no frequency signal is sent out.
nC1 ASD Standard Specifications Model Range 1001P-1007 P 2002P-2022P 2001PL-2022PL 2002P-2022P Input V oltage Rating 120 V/Single Phase 230 V/Single Phase 230 V/Three Phase 230 V/Single Phase with RFI / EMI Filter KW Range 0.1 to 0.75 KW 0.2 to 2.2 KW 0.
nC1 ASD Standard Specifications Model Range 1001P-1007 P 2002P-2022P 2001PL-2022PL 2002P-2022P Input V oltage Rating 120 V/Single Phase 230 V/Single Phase 230 V/Three Phase 230 V/Single Phase with RFI / EMI Filter KW Range 0.1 to 0.75 KW 0.2 to 2.2 KW 0.
An important point after buying a device Toshiba NC1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba NC1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba NC1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba NC1 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba NC1 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba NC1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba NC1.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba NC1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba NC1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
