Instruction/ maintenance manual of the product NB205N330WH Toshiba
Go to page of 144
computers.tosh iba-europe.com User ’ s Manual T OSHIBA mini NB200.
User ’s Manual ii TOSHIBA mini NB200 Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liability is assumed, with respect to the use of the information contained herein.
User ’s Manual iii TOSHIBA mini NB200 EU Conformity S t atement This product and - if applicable - t he supplied accessories too are marke d with "CE" and comply therefore wit h th e appli.
User ’s Manual iv TOSHIBA mini NB200 Any consequences resulting from the use of this product in workin g environments that are not approved ar e not th e responsibility of TOSHIBA. The consequences of the use of this product in non-approved wo rking environments may be: ■ Interference with other devices or machines in the near surrounding area.
User ’s Manual v TOSHIBA mini NB200 Disposal of batteries a nd/or accumulators Disposing of the com puter and the computer’s batteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government.
User ’s Manual vi TOSHIBA mini NB200 ENERGY ST AR ® Program REACH - Compliance St atement The new European Union (EU) chemical regulation, REACH (R egistration, Evaluation, Authorization and Restriction of Chemica ls), entered into force on 1 June 2007.
User ’s Manual vii TOSHIBA mini NB200 GOST.
User ’s Manual viii TOSHIBA mini NB200 T able of Content s Chapter 1 Introduction Equipment ch ecklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual ix TOSHIBA mini NB200 Chapter 4 Operating Basics Using the T ouch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 USB Sleep and Charge functio n . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual x TOSHIBA mini NB200 Chapter 9 T roubleshooting Problem solving process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Hardware and system checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 TOSHIBA sup port .
User ’s Manual xi TOSHIBA mini NB200 Preface Congratulations on your purchase of the TOSHIBA mini NB200 computer . This powerful notebook computer provides excel lent expansion capability , includes multimedia functionality , and is designed to provide years of reliable, high-performan ce computing.
User ’s Manual xii TOSHIBA mini NB200 Chapter 6, Power and Power-up Modes , gives det ails on the computer’s power resources and battery save modes. Chapter 7, BIOS Setup and Passwords , explains how to configure the computer using the BIOS Setup program.
User ’s Manual xiii TOSHIBA mini NB200 Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign ( + ). For example, CTRL + C means you must hold down CTRL and at the same time press C .
User ’s Manual xiv TOSHIBA mini NB200 General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever, cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xv TOSHIBA mini NB200 Creating a computer-friendly environm ent Place the computer on a flat surface that is large enough for the computer and any ot her items you a re using, such a s a printer . Leave enough space around the comput er and o ther equipment to provide adequate venti lation.
User ’s Manual xvi TOSHIBA mini NB200 Mobile phones Please be aware that the use of mob ile phones can inte rfere with the aud io system. The operation of the computer wil l not be impa ired in any way , but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use.
User ’s Manual 1-1 Introduction Chapter 1 Introduction This chapter provides an equipment checkli st, and it identifies the computer ’s features, options and accessories. Equipment checklist Carefully unpack your comp uter , taking care to save the b ox and packaging materials for future use.
User ’s Manual 1-2 Introduction ■ TOSHIBA SD Memory Utilities ■ TOSHIBA PC Health Monitor ■ TOSHIBA Assist ■ TOSHIBA eco Utility ■ Online Manual Documentation ■ TOSHIBA mini NB200 User&a.
User ’s Manual 1-3 Introduction Memory Disks Keyboard Pointing Device Slot PC2-4200 (or compatible) 1GB or 2GB memory module can be installed in the memory slot. Maximum system memory size is 2GB. Video RAM Video RAM capacity is shared with main memory with the proportion b eing allocated using Dynamic Video Memory T echnology .
User ’s Manual 1-4 Introduction Power Ports Slots Multimedia Battery pack The computer is powered by one rechargeable lithium-ion battery pack. Legal Footnote (Battery life) *3 For more information regarding Battery life, please refer to the Disclaimer section in Chapter 10 or click the *3 above.
User ’s Manual 1-5 Introduction Communications Web Camera Web Camera is a device that allows you to record video or take photographs with your computer . Y ou can use it for vi deo chatting or video confer ences using a communic ation tool such as Windows Live Messenger .
User ’s Manual 1-6 Introduction Security Software The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability .
User ’s Manual 1-7 Introduction HDD automatic power off *1 This feat ure automatically cuts of f power to the hard disk drive when it is not acce ssed for a specified time, with pow er being restored when the hard disk drive is next accessed. This can be specified in the Power Opti ons.
User ’s Manual 1-8 Introduction TOSHIBA HDD Protection This feature which is for the hard disk drive models uses the acceleration se nsor built in the computer to detect vibration, falls and shocks,.
User ’s Manual 1-9 Introduction T OSHIBA V alue Added Package TOSHIBA HDD/SSD Alert The TOSHIBA HDD/SSD Alert includes wizard functions to monitor the Disk Drive operating status . HW Setup This utility allows you to customize your hard ware settings according to the way you work with the computer and the peripherals you use.
User ’s Manual 1-10 Introduction Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on their operation, please refer to each utility's online manu al, help files or README.
User ’s Manual 1-1 1 Introduction AC Adaptor If you frequently use you r computer at more than one site, it may be convenient to purchase an additional AC adaptor to be kept at each site in order to remove the need to alwa ys carry the adaptor wi th you.
User ’s Manual 2-1 The Grand T our Chapter 2 The Grand T our This chapter identifies the vari ous components of your computer . Become familiar with each component before yo u operate the computer . Front with the display closed The following figure shows the computer ’s front with its display panel in the closed position.
User ’s Manual 2-2 The Grand T our Wire les s communication The Wireless communication indicator glows amber when the Bluetoo th and Wireless LAN functions are turned on.
User ’s Manual 2-3 The Grand T our Lef t side The following figure shows the comp uter's left side. The left side of the computer 1. External monitor port 4. Headphone jack 2. Thermal vent holes 5. LAN jack 3. Microphone jack 6. Universal Serial Bus (USB 2.
User ’s Manual 2-4 The Grand T our Right side The following figure shows the comp uter ’s right side. The right side of the computer Universal Serial Bus (USB 2.0) port The Universal Serial Bus port, which complies with the USB 2.0 standard, is provide d on the left hand side of the computer .
User ’s Manual 2-5 The Grand T our Back side Figure below shows the computer ’s back side. The computer ’s back side. Underside The following figure shows the undersi de of the computer . Y ou should ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage.
User ’s Manual 2-6 The Grand T our Memory module slot The memory module slot is located here. The memory module slot allo ws for the replacement with an additional memory module. Please refer to the Additional memory module section in Chapter 8, Optional Devices for more information.
User ’s Manual 2-7 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. * Appearance of the Keyboard may be different among models.
User ’s Manual 2-8 The Grand T our Web Ca me r a L ED The Web Camera LED glows when the Web Camera is working. Web Ca me r a We b C am er a is a device that allows you to record video or take photographs with your computer . Y ou can use it for video chatting or video conferencing using a communication tool such as Windows Live Messeng er .
User ’s Manual 2-9 The Grand T our Keyboard indicators When the CAPS LOCK indicator glows, the keyboa rd will produce capitals when any letter is typed. 1. CAPS LOCK indicator Keypad indicators 1 CAPS LOCK This indicato r glows green when letter keys are locked into their uppercase fo rmat.
User ’s Manual 2-10 The Grand T our AC adaptor The AC adaptor can automa tically adjust to any voltage ranging from 100 to 240 volts and to a freque ncy of either 50 o r 60 hertz, enablin g you to use this computer in almost any countr y/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this computer .
User ’s Manual 3-1 Getting S tarted Chapter 3 Getting S t arted This chapter provides basic information to start using your computer . It covers the following topics: ■ Connecting the AC adaptor .
User ’s Manual 3-2 Getting S tarted Connecting the AC adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 3-3 Getting S tarted 1. Connect the power cord to the AC adaptor . Connecting the power cord to the AC adaptor (2-pin plug) Connecting the power cord to the AC adaptor (3-pin plug) 2. Connect the AC adaptor' s DC output plug to the DC IN 19V jack on the right side of the computer .
User ’s Manual 3-4 Getting S tarted Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main.
User ’s Manual 3-5 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-up Modes for more information.
User ’s Manual 3-6 Getting S tarted 1. Power button T urning on the pow er St arting up for the first time The Windows ® 7 Welcome screen will be the first screen d isplayed when you turn on th e power . Follow the o n-screen instructions on ea ch screen in order to properly inst all the operating system.
User ’s Manual 3-7 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode.
User ’s Manual 3-8 Getting S tarted Benefits of Hibernation Mode The Hiberna tion Mode feature pro vides the followin g benefits: ■ Saves data to the hard disk drive when the computer automatically shuts down because of a low battery condition. ■ Y ou can return to your previo us working environment immediately when you turn on the computer .
User ’s Manual 3-9 Getting S tarted Sleep Mode In Sleep mode the power remains on, but the processor and all other devices are in Sleep mode. Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature.
User ’s Manual 3-10 Getting S tarted Executing Sleep Mode Y ou can enter Sleep Mode in one of th ree ways: 1. Click Windows Star t button, point to , and then click Sleep . 2. Close the display panel. This featu re must be enabled. Refer to th e Power Options in the Contro l Panel.
User ’s Manual 3-1 1 Getting S tarted System Recovery Opti ons A hidden partition is allocated on the hard disk drive for the System Recovery Options.
User ’s Manual 3-12 Getting S tarted Creating Optical Reco very Discs This section describes how to create Recovery Discs. A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to DVD media by using the following steps: 1.
User ’s Manual 3-13 Getting S tarted Restoring the pre-in stalled sof tware from the Recovery hard d isk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition. This p artition stores files which can be used to restore pre-installed software in the event of a problem.
User ’s Manual 3-14 Getting S tarted 1. Load the Recovery Discs into the optical disc drive and turn off the computer's p ower . 2. While holding down F12 key on the keyboard, tu rn on your co mputer - when TOSHIBA Leading Innovation>>> appears, release the F12 key .
User ’s Manual 4-1 Operating Basics Chapter 4 Operating Basics This chapter describes the basic operations of your computer an d highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.
User ’s Manual 4-2 Operating Basics USB Sleep and Charge function Y our computer can supply USB bus pow er (DC5V) to the USB port even when the power of the computer is turned OFF . "Power OFF" includes Sleep mode, hibe rnation mode or shutdown state.
User ’s Manual 4-3 Operating Basics St arting the USB Sleep an d Charge Utility T o start the utility , click Sta rt All Programs TOS HI BA Utilities USB Sleep and Charge . Y ou can set mode1/mo de2/mode3/mode4/dis able USB sleep and charge function also in BIOS Se tup menu.
User ’s Manual 4-4 Operating Basics Power supply mod e settings There are several USB Sleep and Charge function modes. "Mode 4(Default)" should normall y be used. Set one of the other modes (try from "Mode 3" to "Mode 1" )*1 if th e charge function cannot be used in "Mode 4(Default)".
User ’s Manual 4-5 Operating Basics ■ Y ou might not be able to use the 'Disc Backup' function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media record er .
User ’s Manual 4-6 Operating Basics Using the web camera Built-in web camera is provided with some models.This secti on describes the bundled webcam utility , which c an capture still and video images. The web camera will auto-run when Windo ws starts.
User ’s Manual 4-7 Operating Basics Using TOSHIBA W eb Camera Applicat ion TOSHIBA W eb Camera Application is pre-configured to start when you turn on Windows ® 7; if you need to restart it go to Start All Programs TOS HI BA Utilities W eb Camera Appl ication .
User ’s Manual 4-8 Operating Basics Using the microphone Y ou can u se the built-in or an external micro phone that connects to the microphone jack to record monaural sounds into your appl ications. It can also be used to issue voice commands to applications that support such functions.
User ’s Manual 4-9 Operating Basics Security ■ TOSHIBA strongly recommend that y ou enable encryption functionality , otherwise your computer will be open to illegal access by an outsider using a wireless connection. If this occurs, the outsider may illegally access your system, eavesdrop, or cause the loss or destruction of stored data.
User ’s Manual 4-10 Operating Basics Wireless W AN Depending on the model you purchased your TOSHIBA Notebook come with an installed Wireless W AN (wide area network) device. This device gives you the abili ty for a high-spe ed connection to the Internet, corporate intranet, and your email while you are away from the office.
User ’s Manual 4-1 1 Operating Basics Inst alling a SIM Card The SIM card slot is located under the battery pack of the computer . Y ou can install and remove one SIM card in the slot. T o install the SIM card, follow the steps below: 1. Shut down the computer - ensure tha t the Power indicator is off.
User ’s Manual 4-12 Operating Basics Disabling or enabling wireless devices Fn + F8 : This ho t key enables and di sables the wireless device s installed in your computer . The wireless modes a re: ■ Enable all Devices: Enables the Wi-Fi ® , BluetoothTM and Wireless W AN modules.
User ’s Manual 4-13 Operating Basics Regu latory Info rmation FCC compliance FCC compliance does not app ly to this product with a Wireless WAN Module installed. Industry Canada (IC) com pliance Industry Canada (IC) compli ance does not apply to this product with a Wireless W AN Module installed.
User ’s Manual 4-14 Operating Basics If you used the T ask Bar to disable Wirele ss LAN functionality , restart the computer or follow the procedures below to enable the syste m to recognize Wireless LAN.
User ’s Manual 4-15 Operating Basics 1. T urn off the power to the computer and to all external devices connected to the computer . 2. Plug one end of the cable into t he LAN jack. Press gently until yo u hear the latch click into place. Connecting the LAN cable 3.
User ’s Manual 4-16 Operating Basics Cleaning the computer T o help ensure long, trouble-free o per ation, keep the computer free of dust and dirt, and u se care with a ll liquids arou nd it.
User ’s Manual 4-17 Operating Basics ■ Before carrying your computer , shut it d own, disconnect the AC adaptor and allow it to cool down - a failure to follow this instruction may result in minor heat injury .
User ’s Manual 4-18 Operating Basics T askbar icon TOSHIBA HDD Protection Properties Y ou can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection window . T o open the window , click Star t All Programs TOS HI BA Utilities HDD Protection Settings .
User ’s Manual 4-19 Operating Basics Det ails T o open the Details window , click the Setup Detail button in the T OSHIBA HDD Protection Properties window .
User ’s Manual 5-1 The Keyboard Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer .
User ’s Manual 5-2 The Keyboard Function keys: F1 … F12 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys.
User ’s Manual 5-3 The Keyboard Press FN + F10 or FN + F1 1 to access the computer's integrated keypad. When activated, the keys with grey ma rkings on their bottom e dge become either numeric keypad keys ( FN + F1 1 ) or cursor control keys ( FN + F10 ).
User ’s Manual 5-4 The Keyboard Hibernate: Pressing FN + F4 switches the system to Hibernation mode. Output: Pressing FN + F5 changes the active display device. Brightness (Down): Pressing FN + F6 decreases the computer's display panel brightness in individual steps.
User ’s Manual 5-5 The Keyboard TOSHIBA Zooming Utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows. TOSHIBA Zooming Utility (enlarge): Pressing FN + 2 enlarges the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows.
User ’s Manual 5-6 The Keyboard Keyp ad overl ay Y our computer 's keyboard does not have a separate numeric keypad but includes a numeric keypad overlay which functions like one - this is located in the center of the keyb oard with the relevant keys havi ng grey letters at their front edge.
User ’s Manual 5-7 The Keyboard T emporarily using normal keyboard (ove rlay on) While using the overlay , you can te mporarily access the normal keyboard functions without having to turn the overlay off: 1. Hold FN and press any other key - this ke y wil l operate as if the overla y were off.
User ’s Manual 6-1 Power and Power-up Modes Chapter 6 Power and Power-up Modes The computer's power resources incl ude the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and ch anging batteries, tips for saving battery power , and power-up modes.
User ’s Manual 6-2 Power and Power-up Modes Power conditions Power indica tors As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status.
User ’s Manual 6-3 Power and Power-up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be n.
User ’s Manual 6-4 Power and Power-up Modes Real T ime Clock battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off.
User ’s Manual 6-5 Power and Power-up Modes Charging the batteries When the power in the battery pack becomes low , the Battery indicator will flash amber to indicate that only a fe w minutes of battery power remain.
User ’s Manual 6-6 Power and Power-up Modes Tim e The following table shows the approximate time required to fully charge a discharged battery . Charging time (hours) Battery charging notice The bat.
User ’s Manual 6-7 Power and Power-up Modes Monitoring battery ca pa city Remaining battery power can be monitore d in Power Options. Maximizing battery op erating time A battery's usefulness d.
User ’s Manual 6-8 Power and Power-up Modes Ret aining dat a with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods.
User ’s Manual 6-9 Power and Power-up Modes Replacing the battery p ack Please be aware that the battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging, and wi ll need to be replaced when it reaches the end of its operati ng life.
User ’s Manual 6-10 Power and Power-up Modes Releasing the battery pack (1) 6. Slide and hold the battery release latch (1 ) to disengage the battery pack and then remove it from the computer (2). Releasing the battery pack (2) 1. Battery safety lock 3.
User ’s Manual 6-1 1 Power and Power-up Modes T o install a battery , follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer (1). 2. Ensure that the battery pack is securely in place and the battery safety lock (2) is in its position.
User ’s Manual 6-12 Power and Power-up Modes Hot keys Y ou can use the FN + F3 hot key to e nter Sleep Mode or FN + F4 to enter Hibernation Mode - please refer to Chapter 5, The Keyboard for further details.
User ’s Manual 7-1 BIOS Setup and Passwords Chapter 7 BIOS Setup and Passwords This chapter explains how to use BIOS to set up user and supervisor passwords. Accessing BIOS Setup Menu T o start the utility , ple ase press " F2 " to enter the BIOS Setup Menu when booting up the computer .
User ’s Manual 7-2 BIOS Setup and Passwords Password User Password / Supervisor Password Select Set User Password / Set Supervisor Passwo rd and press En ter , then the following message is shown: S.
User ’s Manual 7-3 BIOS Setup and Passwords St art ing t he compu ter by p ass word If you have already registered a password, please enter the password manually to start the computer: T o enter a password manually , follo w these steps: 1. T urn on the power as de scribed in Chapte r 3, Getting St arted .
User ’s Manual 7-4 BIOS Setup and Passwords LAN Wake-up o n LAN This feature lets the comp uter's power be turned on from shutdown when it receives a wake-up packet ( Magic packet ) from the LAN. The W ake-up on LAN from Sleep Mode or Hibernati on Mode function is dependent on the setting of OS.
User ’s Manual 8-1 Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility . This chapter describes the connection or installatio.
User ’s Manual 8-2 Optional Devices Examples of memory media Memory media This section provides the important safety precautions in order to handle your memory media.
User ’s Manual 8-3 Optional Devices Memory media format New medi a cards are for matted accordi ng to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards. Formatting an SD/SDHC memory card SD/SDHC memory cards are sold already formatted in conformity to specific standards.
User ’s Manual 8-4 Optional Devices Inst alling a mem ory module T o install a memory module: 1. Shut down the comp uter - make sure the Pow er indicator is off (refer to the T urning off the po wer section in C hapter 3, Getting S tarted if required).
User ’s Manual 8-5 Optional Devices 1. memory module cover Removing the memory module cover 4. Align the notch of the memory modul e with tha t of the memory module slot and gently insert the module into the slot at about a 30 de gree angle before gently pressing until the latches on either side snap into place.
User ’s Manual 8-6 Optional Devices 5. Seat the memory module cover in place and secure it with one scre w . Seating the memory module cover 6. Install the battery pa ck - refer to Replacing the batte ry pack section in Chapter 6, Power and Power-up Modes , if required.
User ’s Manual 8-7 Optional Devices 4. Lift off the memory module cover . 5. Push the latches outward and the memory modul e will pop up. 6. Grasp the memory module by th e sides and pull it out. 7. Seat the memory module cover in place and secure it with one scre w .
User ’s Manual 8-8 Optional Devices When you turn on the power , the compu ter will automatically recognize the monitor and determine whether it is a color or monochrome device .
User ’s Manual 9-1 T roubleshooting Chapter 9 T roubleshooting TOSHIBA designed the computer for dur ability . However , shou ld problems occur , following the p rocedures in this cha pter can help to de termine the cause. All readers should become familiar with this chapter .
User ’s Manual 9-2 T roubleshooting ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your diskette is correc tly inserted and that the diskette’s write protect tab is correctly set. Make notes of your observations and keep them in a permanent error log.
User ’s Manual 9-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer's hardware or attached peripherals.
User ’s Manual 9-4 T roubleshooting Power When the computer is not plugged into an AC adaptor , the battery pack is the primary power source. However , your computer has a number of othe r power resources, including intelligent power supp ly and Real T ime Clock battery .
User ’s Manual 9-5 T roubleshooting Password Battery doesn’t charge when the AC adaptor is attached (Battery indicator does not glow amber) If the battery is complete ly discharged, it will not begin charging i mmediately . Wait a few minutes. If the battery still does not charge, make sure the outlet is supplying power .
User ’s Manual 9-6 T roubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard and Chapter 7, BIOS Setup and Passwords . LCD p anel Apparent LCD problems may be related to the computer ’s setup.
User ’s Manual 9-7 T roubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.
User ’s Manual 9-8 T roubleshooting USB mouse SD/MuliM edia Card Refer also to Chapter 8, Optional Devices . Problem Procedure On-screen poin ter does not res pond to mouse operati on The system might be busy . If the pointer is shaped as an ho urglass, wait fo r it to resume i ts normal shape and try aga in to move it.
User ’s Manual 9-9 T roubleshooting External Monitor Refer also to Chapter 8, Optional Devices , and to your monitor ’s documentation. Sound system USB Refer also to your USB device’ s documentation. Problem Procedure Monitor does not turn on Make sure tha t the external monitor ’s power switch is on.
User ’s Manual 9-10 T roubleshooting USB Sleep and Charge functi on Problem Procedure I cannot use the "USB Sleep and Charge function" The setting of "USB Sleep and Charge functi on" may be disabled. Check the "USB Sleep and Charge" check box to enable this functi on in the TOSHIBA USB Sleep and Charge Utility .
User ’s Manual 9-1 1 T roubleshooting Sleep/Hibernation LAN External devices connected to the comp atible port s do not work Some external devi ces may not work when connected to a compatible port when the "USB Sleep and Charge function" is ena bled in the TOSHIBA USB Sleep and Charge Utility .
User ’s Manual 9-12 T roubleshooting Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For more informa tion on wireless co mm unication, refer to Chapter 4, Operating Basics .
User ’s Manual 9-13 T roubleshooting T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance.
User ’s Manual 10-1 Legal Footnotes Chapter 10 Legal Footnotes This chapter slates the Legal Foo t note(s) information app licable to TOSHIBA com puters.
User ’s Manual 10-2 Legal Footnotes A 32-bit version of the operating system is preins talled on your computer unless explicitly stated that t he operating system is 64-bit.
User ’s Manual 10-3 Legal Footnotes Wireless LAN *7 The transmission speed over th e wireless LAN and th e distance over which wireless LAN can re ach may vary depen ding on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client d esign and software/h ardware configuratio ns.
User ’s Manual A-1 S pecifications Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Size Environme nt al r equireme nt s Power Requirement s Size With 3 cell Battery 263.0 (w) × 192.
User ’s Manual B-1 Display Controller Appendix B Display Controller Display controller The display controller inte rprets software commands into hardware com- mands that turn particular pixels on or off. A high-resolution e xternal moni tor connected to the computer can d isplay up to 1600 horizontal and 1200 vertical pixels at up to 16M colors.
User ’s Manual C-1 Wireless LAN Appendix C Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters.
User ’s Manual C-2 Wireless LAN The range of the wireless signal is re lated to the transmit rate of the wire- less communication. Commu nications at lower tran smit range may travel larger distances. ■ The range of your w ireless devices can be affected when the antennas are placed near metal surfaces and solid h igh-density materials.
User ’s Manual D-1 AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The AC input plug of power cord must be compatible with various interna- tional AC power outle ts.
User ’s Manual D-2 AC Power Cord and Connectors The following illustra tions show the plug shapes for USA, Australia Canada, United Kingdom, Europe , and China.
User ’s Manual E-1 TOSHIBA PC Health Monitor Appendix E T OSHIBA PC Health Monitor The TOSHIBA PC Health Monitor soft ware program monitors computer system functions such as power cons umption, the cooling system and HDD Drop sensor . It alerts users of s pecific system condit ions via pop-up messages.
User ’s Manual E-2 TOSHIBA PC Health Monitor St arting the TOSHIBA PC Health Mo nitor The TOSHIBA PC Health Monitor can be started using the following methods: ■ Click Start All Programs TO SH IB A Utilities PC Health Monitor .
User ’s Manual F-1 If your computer is stolen Appendix F If your computer is stolen Should your comput er be stolen , however , we’ll help you try to find it.
User ’s Manual F-2 If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH T echnical Service a nd Support Leibnizstr . 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Owner ’s details Country stolen: Machine type: (e.
User ’s Manual Glossa ry-1 Glossary Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference.
User ’s Manual Glossa ry-2 Glossary HD+: High Definition Plus IDE: integrated drive el ectronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IrDA: Infrared Data Associa.
User ’s Manual Glossa ry-3 Glossary analog signal: A signal who se characteristics such as amp litude and frequency vary in proportion to (are an analog of) the value to be transmitted.
User ’s Manual Glossa ry-4 Glossary bus: An interfa ce for transmission of signals, da ta or electric power . byte: The represe ntation of a single char acter . A sequence of eight bits treated as a single unit; also the smallest addressable un it within the system.
User ’s Manual Glossa ry-5 Glossary comp atibility: 1) The ability of one computer to accept and process data in the same manner a s another computer without modi fying the data or the media upon whic h it is being transferred. 2) the ability of one device to connect to or communicate with another system or component.
User ’s Manual Glossa ry-6 Glossary delete: T o remove data from a disk or other data storage device. Synonymous with erase. device d river: A program (called a "drive r") that permits a computer to communicate with a device. dialog box : A window that accepts user input to make system settings or record other information.
User ’s Manual Glossa ry-7 Glossary DVD-RAM: A Digital V ersatile Disc-Rand om Access Memory is a highcapacity , high performance disc that lets you store large volumes of dat a.
User ’s Manual Glossa ry-8 Glossary floppy disk ette drive (FDD): An electromechanical device that reads and writes to floppy diskettes. floppy diske tte: A removable disk that stores magneticall y encoded data. Fn-esse: A TOSHIBA utility that lets yo u assign functions to hot keys.
User ’s Manual Glossa ry-9 Glossary I/O devices: Equipment used to communicate wi th the computer an d transfer data to and from it. I/O: Input/outpu t. Refers to acceptance and transfer of data to and from a computer . icon: A small grap hic image displayed on the screen or in th e indicator panel.
User ’s Manual Glossary-10 Glossary LAN: A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to inte ract with any other on the netwo rk. Light Emitting Diode (LED): A semiconductor device tha t emits light when a current is applied.
User ’s Manual Glossary-1 1 Glossary N network: A collection of computers and associa ted devices that are connected by communications faci lities. A network allows you to share data and peripheral devices, such as printers, with othe r users and to exchange electronic mail.
User ’s Manual Glossary-12 Glossary PCI: Peripheral Component Interconnect. An industry standard 32-bit bus. peripheral: Any device, such as a printer or joystick, that i s attached to the computer and controlled by the computer's CPU.
User ’s Manual Glossary-13 Glossary resolution: A measure of the sharpne ss of the images that can be produced by a printer or displayed on a screen.
User ’s Manual Glossary-14 Glossary T terminal: A typewri ter-like keyboard and CRT display screen connected to the computer for da ta input/output. TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix te chnol ogy with thin film transistor (TFT) to drive each cell.
User ’s Manual Index-1 Index Index A AC adaptor, 1-4 additional, 1-11 connecting, 3-2 DC IN 19V jack, 2-4 ASCII characters, 5-7 B Battery charging, 6 -5 extending ba ttery life, 6-8 indicator, 2-2, .
User ’s Manual Index-2 Index FN + spac e (Zoom), 5-4 Function keys, 5-2 H Hard disk drive automatic power off, 1-7 Heat dispersal, 1-8 Hibernation Mode, 1-9 Hot keys , 1-7 Brightness (Down), 5-4 Bri.
User ’s Manual Index-3 Index Power conditions, 6- 1 Hibernation Mode, 3-7 indicator, 6-3 panel power on/off, 6- 12 Shut Down mode (Boot Mode), 3-7 Sleep Mode, 3-9 system auto off, 6-12 turning off, .
An important point after buying a device Toshiba NB205N330WH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba NB205N330WH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba NB205N330WH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba NB205N330WH you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba NB205N330WH will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba NB205N330WH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba NB205N330WH.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba NB205N330WH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba NB205N330WH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
