Instruction/ maintenance manual of the product MV20P2 Toshiba
Go to page of 56
TELEVISION/VCR COMBINA TION Before operating the unit, please read this manual thoroughly . MV20P2 OWNER’S MANUAL A TTENTION If you purchase a universal remote control from your local retailer , please contact the remote manufacturer for the required programming code.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
1 IMPORT ANT SAFEGUARDS S3126A PORT ABLE CART W ARNING (symbol provided by RET AC) 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference.
2 IMPORT ANT SAFEGUARDS (CONTINUED) 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
3 20. SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
4 FEA TURES Color TV With Video Cassette Recorder - Unique space saving design combines a color TV and a video cassette recorder . High Quality Picture T echnology - This TV/VCR equipped “HQ” incorporates VHS High Quality technology . A built-in detail enhancer is used to boost the recorded signal and provide picture quality during playback.
5 T ABLE OF CONTENTS PREP ARA TION SAFETY PRECAUTIONS ....................................................................................................................................... 6 LOCA TION OF CONTROLS .....................................
6 SAFETY PRECAUTIONS Avoid extreme moisture and dust. The ventilation holes prevent overheating. Do not block or cover these holes. Especially avoid covering the holes with soft materials such as cloth or paper .
7 Do not insert fingers or any other objects into the cassette loading slot. Do not spray cleaner or wax directly on the unit or use forced air to remove dust. A void places subject to strong vibration. Use in a horizontal (flat) position only . Keep the unit away from flower vases, sinks, etc.
8 ANT. LOCA TION OF CONTROLS REAR DESCRIPTION OF CONTROLS FRONT 1 10. PHONES jack - Plug monaural headphones or an earphone with an 1/8” miniplug into this jack for private listening. 1 1. Remote sensor - Signals from the Remote Control are received here.
9 INPUT SELECT SKIP SEARCH COUNTER RESET CHANNEL RETURN DIGITAL TRACKING P AUSE /STILL TV MONITOR SLEEP ZERO RETURN TIMER REC CANCEL MUTE ENTER TRACKING INDEX EJECT MENU SPEED PROGRAM CALL CLOSED CAPT.
10 BA TTERY INST ALLA TION BA TTER Y PRECAUTIONS The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
11 Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires) Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/ UHF antenna to the antenna jack.
12 This TV/VCR has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is gener- ally provided by the cable company .
13 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
14 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC 3 SETTING THE LANGUAGE Press MENU .
15 AUT O CLOCK SETTING The auto clock function will automatically set the built-in clock (Month, Day , Y ear and Time) when the TV/VCR is connected to an antenna or cable TV system and it is turned off.
16 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC Press MENU .
17 2 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y.
18 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
19 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC Press CALL .
20 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
21 T ext: The text closed caption mode will usually fill the screen with a programming schedule or other information. After selecting a closed caption mode, it will stay in effect until it is changed, even if the channel is changed.
22 T O MEMORIZE CHANNELS Cable TV chart The chart below is typical of many cable system channel allocations. Press MENU . Press B or A to select option. Press B or A to select “TV” or “CABLE”. The arrow indicates the selected position. Press MENU repeatedly until the menu screen is cleared.
23 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC Press MENU .
24 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC Press B or A to select option.
25 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC Press ▲ or ▼ to select “P ASSWORD”.
26 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
27 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC Press MENU repeatedly until the menu screen is cleared.
28 T O CHANGE P ASSWORD V-CHIP V-CHIP SET CHANGE P ASSWORD / / / MENU ON CHANGE P ASSWORD NEW P ASSWORD : – – – – 0-9/ENTER/CANCEL/MENU 0-9/ENTER/CANCEL/MENU CHANGE P ASSWORD CONFIRM P ASSWORD : – – – – 1. Press MENU . 2. Press B or A to select option.
29 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
30 Press B or A to set the desired minute, then press ▼ . CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER D.
31 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
32 Mode Picture Quality ST ANDARD Standard picture quality (factory-set) SPORTS Bright and dynamic picture (factory-set) MOVIE Movie-like picture setting (factory-set) MEMORY Y our personal preference.
33 2 EJECT Push the center of the tape until it is automatically retracted into the TV/VCR. AUTOMA TIC POWER ON AND PLA Y When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically and playback will start immediately .
34 T APE SPEED T -160 2-2/3 hours 8 hours T -90 1-1/2 hours 4-1/2 hours T -60 1 hour 3 hours T -30 30 minutes 1-1/2 hours T -120 2 hours 6 hours After recording, break off the erase prevention tab if you do not wish to record over the tape. Cover the hole with adhesive tape.
35 1 3 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA.
36 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
37 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC SPECIAL PLA YBACK Press PLA Y to resume normal viewing speed.
38 3 1 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA.
39 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
40 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
41 1 4 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y FF REW COUNTER RESET TV MONITOR SKIP SEARCH EJECT VOL+ + + – – VOL– CH– CH+ REC 3 EXAMPLE: One-touch T imer Recording for 30 minutes.
42 3 1 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA.
43 5 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y.
44 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
45 3 1 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA.
46 3 1 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA.
47 CALL PROGRAM SPEED SLEEP CANCEL MUTE POWER CLOSED CAPTION INPUT SELECT CHANNEL RETURN ZERO RETURN TIMER REC 0 8 7 9 6 5 4 3 2 1 MENU ENTER DIGITAL TRACKING P AUSE /STILL TRACKING INDEX STOP PLA Y F.
48 3 1 4 Press PLA Y on the playback VCR or Camcorder . NOTES: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best result. • Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.
49 Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
50 Press the TIMER REC buttons. Check the following chart before requesting service. PROBLEM AND TROUBLESHOOTING GUIDE T ry another channel. Check picture control adjustments. Check for source of reception disturbance. Check CABLE connection or VHF/ UHF antenna, reposition or rotate antenna.
51 18 20, 21 TV station stopped broadcasting. Sleep timer is set. OFF timer is set. TV station experiencing problems or program tuned is not closed captions. TV signal is weak. The CLOSED CAPTION button is not depressed. T une new channel. Set Sleep T imer to “0”.
52 Picture tube: T ype 20 (508.0 mm diagonal) T uner type: Quartz PLL frequency synthesized Receiving channels: VHF 2-13 UHF 14-69 Cable TV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94) 95-99 (A-5)-(A-1) 100-125 (100)-(125) 01 (5A) Antenna input: VHF/UHF In 75 ohms coaxial Speaker: 3 inches (76.
53 T oshiba America Consumer Products, L.L.C. (“T ACP”) makes the following limited warranties. These limited warran- ties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
04/04 PRINTED IN THAILAND U All warranties implied by state law , including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above.
An important point after buying a device Toshiba MV20P2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba MV20P2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba MV20P2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba MV20P2 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba MV20P2 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba MV20P2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba MV20P2.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba MV20P2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba MV20P2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
