Instruction/ maintenance manual of the product MK1003GAL Toshiba
Go to page of 9
TOSHIBA AMERICA INFORMA TION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA MK1003GAL (HDD1262) 1.8-INCH HARD DISK DRIVE USER MANU AL Rev 02 11/2006.
CONTENTS Introductio n .............................................................................. 1 Setup ........................................................................................ 2 Using t he HDD ...................................
1 INTR ODUCTION – MK1003GAL (HDD1262) General Features • 1.8" sized drive • 1 Platter • 10 Gigabytes* • 5mm High • 15ms Average Seek Time • ATA (2 - 5) Interface • Ultra DMA 100 .
2 SETUP – MK1003GAL (HDD1262) Caution : Your Hard Disk Drive is a precision device a nd ev en a small drop onto any surface can cause damage. Electronstatic discharge can a lso damage the dr ive. You should ground yours elf prior to handling the drive.
3 USING THE HARD DISK DRI VE – MK1003GAL (HDD1262) Backing up Data Files To avoid data loss, regularly back u p the data files on the hard disk drive.
4 SPECIFICA TIONS –MK1003GAL (HDD1262) General Model MK1003GAL (HDD1262) Interf ace A T A-2/3/4/5 Functionality Formatted Capacity 10.0GB* Rotational Speed 4200rpm Avg. Rotational Latency 7.14/ms Spin-up Time 3.6sec (typical) Buffer 512KB Seek Time Average Maximum 15 26 Internal Transfer Rate 115.
5 Physical Height 0.2" (5.0mm) Width 2.13" (54.0mm) Depth 3.09" (78.5mm) Weight 1.8oz (51g) typ Regulatory The drive satisfies the following standards: Underwriters Laboratories (UL) 1950 Canadian Standard Associ ation (CSA) C22.
6 DRIVE CONNECT ORS –MK1003GAL (HDD1262) Figure 1. MK1003GAL HDD - INTERF A CE CONNECT OR Interface Connector Drive Side Connector MCD-D50 Series by DDK Connec tors Recommended Ho st Side Connector .
7 Interface Signals DRIVE INTERFACE SIG NALS PIN SIGNAL PIN SIGNAL 1 RESET 2 GROUND 3 DD 7 4 DD 8 5 DD 6 6 DD 9 7 DD 5 8 DD 10 9 DD 4 10 DD 11 11 DD 3 12 DD 12 13 DD 2 14 DD 13 15 DD 1 16 DD 14 17 DD .
An important point after buying a device Toshiba MK1003GAL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba MK1003GAL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba MK1003GAL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba MK1003GAL you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba MK1003GAL will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba MK1003GAL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba MK1003GAL.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba MK1003GAL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba MK1003GAL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
