Instruction/ maintenance manual of the product 1222FX Behringer
Go to page of 15
Version 1.0 January 2006 Users Manual ENGLISH XENYX 1222 F X.
2 XENYX 1222FX This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 XENYX 1222FX 1222FX XENYX Premium 16-Input 2/2-Bus Mixer with XENYX Mic Preamps, British EQs, 24-Bit Multi-FX Processor and USB/Audio Interface s Premium ultra low-noise, high headroom analog mixer .
4 XENYX 1222FX 1. INTRODUCTION Congratulations! In purchasing the BEHRINGER XENYX you have acquired a mixer whose small size belies its incredible versatility and audio performance. The XENYX Series represents a milestone in the development of mixing console technology.
5 XENYX 1222FX FBQ Feedback Detection System The FBQ Feedback Detection System, integrated into the graphic equalizer, is one of the most outstanding characteristics of this mixing console. This ingenious circuitry lets you immediately recognize and eliminate feedback frequencies.
6 XENYX 1222FX + The block diagram supplied with the mixing console gives you an overview of the connections between the inputs and outputs, as well as the associated switches and controls. For the moment, just try and trace the signal path from the microphone input to the MON SEND connector.
7 XENYX 1222FX LOW CUT The mono channels of the mixing consoles have a high-slope LOW CUT filter for eliminating unwanted, low-frequency signal components (80 Hz, 18 dB/octave).
8 XENYX 1222FX CLIP LED The CLIP LED lights up when the input signal is driven too high. In this case, lower apparent frequency increase on the channel EQ to avoid distortion.
9 XENYX 1222FX FX TO MON You can use this control to insert an effects signal from the built-in effects processor to your monitor mix. Of course, to do this, your effects processor must first receive a signal, i.e. the FX controls in the channel strips must be turned up, and the FX SEND fader (see fig.
10 XENYX 1222FX CD/T APE MUTE Using this switch, the input signal from the CD/tape inputs is muted. CD/T APE RET(URN) This stereo fader assigns the input signal from the CD/tape inputs into the main mix. Fig. 2.10: 2-track connectors CD/T APE INPUT The CD/TAPE INPUT RCA connectors are provided for connecting a 2-track machine (e.
11 XENYX 1222FX 2.3.6 Level meter and level setting Fig. 2.14: Level meter POWER The blue POWER LED indicates that the device is switched on. +48 V The red +48 V LED lights up when the phantom power supply is switched on.
12 XENYX 1222FX + Connect microphones before you switch on the phantom power supply. Please do not connect microphones to the mixer (or the stagebox/ wallbox) while the phantom power supply is switched on. In addition, the monitor/PA loudspeakers should be muted before you activate the phantom power supply.
13 XENYX 1222FX Fig. 4.1: 1/4" TS footswitch connector 4.2.1 Audio connections Please use commercial RCA cables to wire the 2-track inputs and outputs.
14 XENYX 1222FX 5. SPECIFICATIONS Mono inputs Microphone inputs (XENYX Mic Preamp) T ype XLR, electronically balanced, discrete input circuitry Mic E.I.N. (20 Hz - 20 kHz) @ 0 W source resistance -134 dB / 135.7 dB A-weighted @ 50 W source resistance -131 dB / 133.
15 XENYX 1222FX T echnical specifications and appearance subject to change without notice. The information cont ained herein is correct at the ti me of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners.
An important point after buying a device Behringer 1222FX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer 1222FX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer 1222FX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer 1222FX you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer 1222FX will certainly help you make a decision on the purchase.
If you already are a holder of Behringer 1222FX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer 1222FX.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer 1222FX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer 1222FX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
