Instruction/ maintenance manual of the product HWS-1402XWHM3-E Toshiba
Go to page of 168
Toshiba Model name: Outdoor Unit HWS-802H-E HWS-1102H-E HWS-1402H-E AIR TO WATER HEAT PUMP Hydro Unit HWS-802XWHM3-E HWS-802XWHT6-E HWS-1402XWHM3-E HWS-1402XWHT6-E HWS-1402XWHT9-E Hot Water Cylinder HWS-1501CSHM3-E(-UK) HWS-2101CSHM3-E(-UK) HWS-3001CSHM3-E(-UK) SERVICE MANUAL A09-002 +00A09-002_01EN_SVM_ALL_ Air_to_Water.
1 Toshiba Contents 1 SAFETY PRECAU TIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 NEW REFRIGERANT (R410A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Toshiba 9 Method of Defect Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 9-1.Matter s to be con firmed fir st . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Toshiba 1 SAFETY PRECAUTIONS The unit and th is servi ce guide li st very import ant safety pre cautions. Understan d the follow ing detail s (indicat ions and symbol s) before rea ding the body text , and follow the instruc tions. [About indication] * Property damag e indicate s extended dama ge to property, furniture, livesto ck, or pets.
4 Toshiba <No modification> Do not modify the unit. • Do not disassemble or modify the parts also. • A fire, an electric shock, or an injury may occur. <Use specified parts> Use the specified parts ( ∗ ) w hen replacing them. • Using parts other than specified ones may cause a fire or an electric shock.
5 Toshiba <Check insulation> After the w ork is completed, check w ith an insu lating-resistance tester (500V) that the insulation resistance betw een the live and dead-metal parts is 2 M Ω or higher. • A low insulation resistance may cause a disaster at a customer site due to electrical leakage or an electric shock.
6 Toshiba 2 NEW REFRIGERANT (R410A) This Air to Water Heat Pump adopts a new refrigeran t HFC (R410A ) to prevent de structi on of the ozone l ayer. The workin g pressure of R410A refrigerant is 1.6 times higher than that of th e conventio nal refriger ant R22.
7 Toshiba 2-2. Installing refrigerant pipe 2-2-1. Steel pipe and joint For refrig erant piping , steel pipe and joint s are mainly used. Sele ct those com ply with JIS (Japanese Industrial Standards ) for a serv ice work. Also, us e such cle an piping ma terials t hat less i mpuriti es attach t o the insi de of pipe and joints .
8 Toshiba 2-2-2. Processing of piping materials When installing refrigerant pipe, preve nt water or du st from enter ing the pipe, a nd do not use o il other than lu bricant used for Air to Water He at Pump. Ma ke sure that no ref rigerant lea k occurs.
9 Toshiba Flare connecting procedure and precautions 1) Make su re that the fl are and connec ting porti ons do not have an y flaw and dust . 2) Corre ctly ali gn the flared surface and t he connecti ng axis. 3) Tight en the fla re with d esignated torque by mean s of a torq ue wrench.
10 Toshiba 2-3. Tools 2-3-1. Necessary tools In Air to W ater Heat P ump using R41 0A, the ser vice port di ameter of pa cked valv e of the outdoo r unit is c hanged to prevent mixin g of other refrige rant. To reinfo rce the press ure resistance , flare dimension s and opposite sid e dimensio ns of fl are nut (F or Ø 12.
11 Toshiba 2-4. Recharging of refrigerant Recharge, if necessary , the sp ecified amo unt of new r efrigerant according t o the followin g procedu re. NOTE • Never charge ref rigerant ex ceeding the specified amount.
12 Toshiba NOTE • Make sure that t he setting is appropriat e so that liq uid can b e charged. • A cylinder wi th siphon ena bles li quid to be char ged without the cylinde r turned upsi de down.
13 Toshiba 2-5. Brazing of pipes 2-5-1. Materials of brazing Silver brazing metal Silver brazing metal is an alloy main ly comp osed of silver a nd copper. It uses ir on, copper, or copper allo y, and is rel atively expensiv e though it ex cels in sol dering.
14 Toshiba 5) Use th e reducing va lve to adjus t the nitro gen gas flow sp eed to 0.05 m 3 /hour or 0.02 MPa (0.2 kgf/cm 2 ). 6) Afte r the steps abo ve, keep the ni trogen gas flowing until t he pipe coo ls down to a certain extent.
15 Toshiba 3 Specifications *1 Heating performance mea surement conditions: outside air temperatu re 7 or 6 °C, water supply tempe rature 30 °C, outlet tem perature 35 °C, ref rigerant piping length 7.
16 Toshiba *1 Heating performance mea surement conditions: outside air temperatu re 7 or 6 °C, water supply tempe rature 30 °C, outlet tem perature 35 °C, ref rigerant piping length 7.
17 Toshiba 4 Outside Drawing 4-1. Hydro unit HWS-802XWHM3-E, 802XWHT6-E HWS-1402XWHM3-E, 1402XWHT6-E, 1402X WHT9-E 960 Anchor bolt long hole pitch B leg part 40 380 40 20 20 72.5 72.5 2-dia.12x17 long hole (for dia.8-10 anchor bolt) 2-dia.12x17 U-shape hole (for dia.
18 Toshiba 4-2. Outdoor unit HWS-802H-E Portion B Drain hole ( 25 burring hole) Portion A Air outlet 900 Air inlet Air inlet 5-Drain hole ( 20 88 burring hole) ( 12 17 long hole) Mounting bolt hole De.
19 Toshiba HWS-1102H-E, 1402H-E Portion B 96 39 48 54 600 Portion A 70 34 75 46 170 60 380 200 17.5 128 Air inlet 118 74 383 Air outlet 150 17.5 365 Mounting bolt hole Power source intake hole Mountin.
20 Toshiba 4-3. Hot water cylinder 550 595 2066.6 2040 550 595 111 4 1090 595 1497.6 1474 550 Specification for UK only Specification for UK only Specification for UK only HWS-3001CSHM3-E(-UK) HWS-2101CSHM3-E(-UK) HWS-1501CSHM 3-E(-UK) +00A09-002_01EN_SVM_ALL_ Air_to_Water.
21 Toshiba 5 Wiring Diagram 5-1. Hydro Unit 11 3 3 1 2 3 4 5 6 1 4 5 6 2 3 WHI WHI Transformer ORN ORN RED RED BRW BRW CN102 (WHI) 1 1 3 2 3 CN101 (WHI) CN202 (YEL) BLK BLK CN201 (WHI) 22 11 Thermal protector (auto) 75 ± 3 High pressure switch 4.
22 Toshiba 5-2. Outdoor Unit Control board (Blue) ( White ) HMS-1102, 1402H-E only ( White ) ( White ) Upper ( White ) Operating power 4-way valve coil Reactor 230V 50Hz Earth screw Earth screw Earth .
23 Toshiba 5-3. Hot Water Cylinder Unit 12 TB03(230V) AB TB06(TTW) Supply 230 V from hydro unit Cable size 1.5 mm 2 (minimum) To hydro unit Green / Yellow Green / Yellow Blue Double pole thermal cut out Blue Brown Brown TTW sensor Hot water cylinder heater +00A09-002_01EN_SVM_ALL_ Air_to_Water.
24 Toshiba 6 Key Electric Component Rating 6-1. Hydro Unit HWS-802XWHM3-E, 802XWHT6-E O ········· Applied OP ······· O ptional accessory No. Component name Model name Type name Rating M3-E T6-E 1 Circulat ing pump OO UPS025-65 K 130 AC230 V 0.
25 Toshiba HWS-1402XWHM3-E, 1402XWHT6-E, 1402X WHT9-E O ········· Applied OP ······· O ptional accessory No. Component name Model name Type name Rating M3-E T6-E T9-E 1 Circulat ing pump OOO UPS25-80 130 AC230 V 0.
26 Toshiba 6-2. Outdoor Unit HWS-802H-E No. Component name Type name Rating 1 Compress or DA220A2F-22L 2 Outdoor fan moto r ICF-280-A 60-1 Outpu t 60 W 3 4-way valve coil VHV-01AP5 52B1 AC230 full-wav.
27 Toshiba HWS-1102H-E, 1402H-E No. Component name Type name Rating 1 Compress or DA422A3F-25M 2 Outdoor fan moto r (x2) ICF-280-A 100-1 Output 100 W 3 Reactor (x2 ) CH-44 1.
28 Toshiba 6-3. Hot Water Cylinder Unit O ········· Applied No. Component name Model name Type na me Rating 1501 CSH M3-E (-UK) 2101 CSH M3-E (-UK) 3001 CSH M3-E (-UK) 1 Hot water cylinder he ater OOO – AC230 V 2.
29 Toshiba 6-4. Water Heat Exchange Control Board HWS-802XWHM3-E, 802XWHT6-E HWS-1402XWHM3-E, 1402XWHT6-E, 1402X WHT9-E Relay board connector CN501 Transformer input connector CN101 AC power supply co.
30 Toshiba 6-5. Outdoor Control Board HWS-802H-E Electrolytic capacitors Reactor connection connecto r Compressor output terminals CN202 CN201 CN200 Fan motor output CN300 (White) Case thermostat conn.
31 Toshiba HWS-1102H-E, 1402H-E Fan motor output (Upper) CN400(White) Fan motor output (Lower) CN300(White) Case thermostat connector CN609(Blue) Power circuit protection fuse F100(250V,3.
32 Toshiba 7 Refrigeration Cycle / Water System Diagram 7-1. Water System Diagram M M Fan coil unit Radiator unit Floor heating By-pass valve (locally procured) By-pass valve (locally procured) Moteri.
33 Toshiba Installation example of water circuit The water c ircuit f or a system without bu ffer tank ((1), (2), (3), (5)) requires 5 or more branc hes of Flo or heating or Radiator etc. Less than 5 br anches may cause a flow d eficiency. In this case, please provide a buff er tank and sec ondary pu mps as shown in (4).
34 Toshiba 7-2. Refrigeration Cycle System Diagram HWS-802XWHM3-E, 802XWHT6-E/802H-E HWS-1402XWHM3-E, 1402XWHT6-E , 1402XWHT9-E/1102H-E, 1402H-E P TWO THO TWI TC TE TO TS TD Outdoor unit Refrigerant R410A .
35 Toshiba 8 Operational Description This chapt er describe s the worki ng circuit and control of Air to W ater Heat Pu mp about the fol lowing ope rations.
36 Toshiba Item Operation flow and app licable data, etc. Operation description 8-1. Basic Operation 1) Operation contr ol Remote controller 1. Purpose The operations of the hydro unit and the outdoor unit are controlled according to user-defined operation condition settings.
37 Toshiba 8-1. Basic Operation 2) Hot w ater supply operation Hot water supply operation 1. Purpose Hot water supply 2. Details This section performs hot water s upply op erati on acco rding t o heat ing conditions specified for the steps in the left.
38 Toshiba 8-1. Basic Operation 4) Cooling operation NOTE: No coding mode i n default set ting. When use t he cooling mode , please change th e FC02 to “ 0”. Relat ed FC 1. Purpose Cooling 2. Details This section performs cooling operation according to cooling conditions specified for the steps in the left.
39 Toshiba Item Operation flow an d applicable data, etc. 8-2. Operation Mode and Control Method The following shows the operation modes and controlled objects.
40 Toshiba 8-2. Operation Mode and Control Method 2) Heating operation <Operation only for ZONE1> • This operation is enabled when DP_SW12_2 ZONE1 is set to "ON" (default). • The remote controller displays settings, and only the set temperature of can be changed.
41 Toshiba 8-2. Operation Mode and Control Method 3) Cooling operation Pressing the [ZONE1, 2] button and then [OPERATION MODE] starts a cooling operation. 1) Operation start condition Pressing the [ZONE1, 2] button and then [OPERATION MODE] starts a cooling operation.
42 Toshiba 8-2. Operation Mode and Control Method 5) Simultaneous operations of "hot wa ter supply" and "cooling" For simultaneous operations of "hot water supply" and "cooling", basically cooling runs by a heat pump operation, and hot water supply by a heater operation.
43 Toshiba 8-2. Operation Mode and Control Method 7) Hot wa ter boost operation A hot water boost operation boils water quickly to the set temperature TSC_H = 75°C (FC_09).
44 Toshiba 8-2. Operation Mode and Control Method 8) Anti bacteria (ANTI BACTERIA) o peration An anti bacteria operation regularly per forms a Hot water supply operation with the set temperatu re TSC_H = 75°C (can be set with FC_0A).
45 Toshiba 8-2. Operation Mode and Control Method 9) Night set back (NIGHT SET BACK) operation A night set back operation performs heating at 5°K lower and cooling at 5°K temperatures against the remote controller set temperature from the setting start time (22:00) to the end time (6:00) every day.
46 Toshiba 8-2. Operation Mode and Control Method 11) AUTO operation An auto operation sets the water temperature T SC_F depending on the outside temperature TO by following the table below. 1) How to operate • Pressing the remote controller [ZONE1, 2] button and then the [AUTO] button starts AUT O operation for heating.
47 Toshiba 8-2. Operation Mode and Control Method 12) Nighttime l ow-noise operation A night time low-noise operation reduces operation frequency and the number of outdoor fan rotations for a cert ain period during nighttime as noise control for neighborhood.
48 Toshiba 8-3. Hydro Unit Control 1) Capacity contr ol (compressor, high-temperature release, low-temperature r elease) This unit controls the compressor frequency and heater output so that the water outlet temperature matches the remote controller set temperature.
49 Toshiba 8-3. Hydro Unit Control 1-2) High temperature r elease control A heat pump operation is performed as shown in the table below according to the TC sensor detecting tempera ture. • For the detected temperature, TC (= TWO + 2 deg ree) of a heat pump oper ation is used.
50 Toshiba 8-3. Hydro Unit Control 2) Heater control 2-1) Hot w ater supply operation During a hot water heat pump operation, the u nit energizes the hot water cylinder heater (2.75 kW) when all the following conditions are met. Note that w hen the hot wate r supply set temperature ( TSC_F) is reached, the unit stops energizing the heater.
51 Toshiba 8-3. Hydro Unit Control 2) Control at the time of heating heater operation • Controlled Object: Backup heater, Booster heater The backup heater control starts when 13 minutes has passed after the heating heat pump operat ion started.
52 Toshiba 8-3. Hydro Unit Control 3) Circulation pump control One circulation pump (enhancing pump P2) can be connected to the unit in addition to the built-in circulation pump P1.
53 Toshiba 8-3. Hydro Unit Control 5) Mixing Valve control (2-temperature heating control) To set different radiator unit supply temperatures or floor heating supply temperatures, the unit performs Mixing Valve control.
54 Toshiba 8-3. Hydro Unit Control 7) Automatic restart control The unit records operation information before a power outage and retrieves the information after the pow er is on again to restart automatically the operation with the inform ation.
55 Toshiba 8-3. Hydro Unit Control 8-2) Piping freeze prevention control 2 TC and TWO activates freeze prevention regardless of a heat pump operation mode. 1) Determination condition: TWO>20°C, 2*T C+TWO<-12°C is continuously detected for 30 seconds or longer.
56 Toshiba 3. Hy dro Unit Control 10) Room temperature thermostat control (Option board TCB-PCM03E is necessary. Connect the connection cable to the water heat exchange board CN211.) When the room thermostat is connected and heating or cooling operates with DP_SW12-4 set to ON, an room thermostat operation is performed.
57 Toshiba 8-4. Outdoor unit control 1) PMV (Pulse motor valve) control Valve opening is controlled using the expansion valve with a pulse motor according to a heat pump operation status. • PMV is controlled between 30 and 500 pulses during an operation.
58 Toshiba 8-4. Outdoor unit control 3) Current r elease control The number of compressor rotation is controlled so that current value of the compressor drive ci rcuit does not exceed the specified value. • The outdoor unit detects the input current.
59 Toshiba 8-4. Outdoor unit control 5) Outdoor fa n control The outdoor side control part controls the number of fan motor rotations by receiving an operation instruction from the indoor side (Hydro unit) control part.
60 Toshiba 8-4. Outdoor unit control 5-2) Hot w ater supply and heating fan control 1) The TE sensor, TO sensor and operation frequency control the outdoor fan.
61 Toshiba 8-4. Outdoor unit control 6) Defrosting control This control defrosts the outdoor heat exchanger. The temperatur e sensor (TE sensor) of the outdoor heat ex changer determines frost formation, and then defrosting is performed in the 4-way valve reverse defrosting method.
62 Toshiba 8-4. Outdoor unit control 7) Winding heating control 1) This control energizes the inactive compressor instead of th e case heater to warm the compressor.
63 Toshiba 8-4. Outdoor unit control 10) High temperature release control 1) To prevent excessive hi pressure rise, operation frequency is controlled by the TL sensor when cooling and by TWO sensor when heating.
64 Toshiba 9 Method of Defect Diagnosis In order to di agnose the def ective par t of the heat pump system, fi rst underst and the symptom of the defect. (1) Check th e operation s tatus. (It does not move, or it moves but stops, et c.) (2) Flashin g display o n the dis play part of the hy dro unit.
65 Toshiba 9-1. Matters to be confirmed first 9-1-1. Check the power supply voltage Check tha t the powe r supply vo ltage is AC230 V± 23 V. If the power s upply vol tage is no t in this range, it may not operate norma lly.
66 Toshiba 9-3. Outline of the determination diagram The first d eterminati on of whethe r a defectiv e part is in the hydro unit o r the outdoor un it can be perf ormed by the following me thod. 9-3-1. Procedure of defect diagnosis In the case of a defect, pl ease apply the f ollowi ng procedure i n order to fi nd the defect ive part.
67 Toshiba 9-3-4. How to diagnose by error code Defect mode detected by the water heat exchange O ... Possible × .... Not possible Check code Diagnostic functional o peration Determination and actio .
68 Toshiba A07 Pressure sw itch operation The press ure switch operates for 300 sec conti nuously during the heat pump operation. O × 1. Almost no or l ittle water fl ow. 2. Defect of th e flow switch. 3. On-load operation unde r the above condition s.
69 Toshiba F17 TFI sensor err or Open or short c ircuit in the floor temperature s ensor. × O 1. Ch eck the resist ance value and disconnecti on of the floor-i nlet temperature s ensor (T FI). 18 7 F18 THO sensor error Open or shor t circ uit in the heat er outlet temperature s ensor.
70 Toshiba Defect mode detected by the outdoor unit O ... Possible × .... Not possible Check code Diagnostic functional op eration Determination and actio n Number of abnorm alities for confirm ation Detail ed item Operational cause Backup present Automat ic reset F04 TD sensor error Open or short circu it in the dischar ge temperature s ensor.
71 Toshiba H04 Operation of case thermost at When the cas e thermos tat exceeds 125°C. O × 1. Check the refri geration cycle (gas leak). 2. Check the case thermostat and connector . 3. Ch eck that the service val ve is fully open. 4. Defect of the pulse moto r valve.
72 Toshiba P20 High pressur e protectio n operation When an abnormal stop oc curs due to the high pre ssure r elease con trol. When the heat exchange temperature sensor (T L) detects 63°C during the cooling oper ation. When the water outl et sensor (TWO) detects 60°C during the heating or hot water supply operation.
73 Toshiba Defect mode detected by the remote control Check co de Diagnostic functio nal operation Determination and act ion Operational cause Status of air- conditio ning Conditi on Not display ing a.
74 Toshiba 9-4. Diagnosis flow chart for each error code 9-4-1. Hydro unit failure detection [A01] Error Pump flow determination Pump rotates Replace TC sensor Remove waste Dirt clogging inside water .
75 Toshiba [A02] Error Temperature rise and error sh ort circuit Replace TWI, TWO, and THO sensors No (TWI,TWO,THO 70°C) TWI, TWO, and THO sensor characteristics are correct Yes No Water outlet tempe.
76 Toshiba [A03] Error Temperature rise and error sh ort circuit Replace TTW sensor No (TTW 85°C is detected) TTW sensor characteristic is correct Yes No Hot water cylinder heater is energized Yes No.
77 Toshiba [A04] Error Freeze prevention control When the o utside temp erature or inlet wate r tempera ture is low (a pprox. 20° C or lower) a nd the roo m load is lar ge (operatio n frequency ratin g), the freez e preventio n control may be a ctivated .
78 Toshiba [A05] Error Piping freeze prevention control Water heat exchange control board DPSW11-1 is ON Replace backup heater and safety valve Set water heat board DPSW11-1 to ON No (Backup heater NG.
79 Toshiba [A07] Error Pressure switch operation (Hot water supply/Heating operation) Replace flow switch Remove waste Flow switch is normal Secure water circulation amount Circulation flow shortage W.
80 Toshiba [A08] Error Lo pressure sensor lowering operati on failure (Cooling/ Defrosting operation) Replace flow switch Remove waste Flow switch is normal Secure water circulation amount Circulation.
81 Toshiba [A09] Error Overheat prevention thermostat failure (Hot water s upply/Heating operation) Put water into water circuit (Recommended: 1 - 2 Bar) Replace heater unit exchanger air vent valve R.
82 Toshiba [A11] Error Release protection operation Replace flow switch Remove waste Flow switch is normal Secure water circulation amount Circulation flow shortage Waste stuck inside water circuit 12.
83 Toshiba [A12] Error Heating or Hot wa ter supply heater failure Water heat exchanger board DPSW11-1,2 is ON Replace booster heater unit and safety valve Set water heat board DPSW11-1,2 to ON A12 ab.
84 Toshiba [E04] Error Outdoor unit operates Group address of remote controller is correctly set Yes Check water heat exchanger control board If defective, replace it Check outdoor control board If de.
85 Toshiba [F03] Error TC sensor failure [F04] Error TD sensor failure [F06] Error TE sensor failure Correct TC sensor connection Replace TC sensor No No TC sensor connector (CN203) is connected Yes T.
86 Toshiba [F07] Error TL sensor failure [F08] Error TO sensor failure [F10] Error TWI sensor failure Correct TL sensor connection Replace TL sensor No No TL sensor connector (CN604) is connected Yes .
87 Toshiba [F11] Error TWO sensor failure [F14] Error TTW sensor failure [F17] Error TFI sensor failure Correct TWO sensor connection Replace TWO sensor No No (See characteristic table on page 101) TW.
88 Toshiba [F18] Error THO sensor failure [F19] Error THO senso r detach failure Correct THO sensor connection Replace THO sensor No No (See characteristic table on page 101) THO sensor connector (CN2.
89 Toshiba [F20] Error TFI detach failure [F23] Error Lo pressure sensor detach failure Attach TFI sensor to pipe Replace TFI sensor No No TFI sensor is attached to pipe Yes TFI sensor characteristic .
90 Toshiba [F29] Error EEPROM failure A failu re is detec ted in the IC10 non-vo latile m emory on the wa ter heat exc hanger board du ring a hot w ater suppl y unit operat ion.
91 Toshiba 9-4-2. Outdoor Unit Failure Detection Diagnosis procedure for each check code • One check code may indicat e multipl e symptoms. I n such a cas e, see the LE D indica tion on the outdoor board to narrow down the c heck deta ils.
92 Toshiba [H02] <Indication 1> <Indication 2> [Compres sor lock] [H04] <Indication 1> <Indication 2> [Case thermos tat operati on] [L10] <Indication 1> <Indication 2&.
93 Toshiba [L29] * Any of the following abnormality may occur. Seeing the LED on the out door board can det ermine which abnormalit y occurs. Communicati on failure bet ween MCUs, Heat si nk temperatu.
94 Toshiba [P03] <Indication 1> <Indication 2> [A bnormal outlet tem perature] [P04] * Any of the following abnormality may occur. Seeing the LED on the out side board ca n determine which abnormali ty occurs.
95 Toshiba [P07] <Indication 1> <Indication 2> [Heat sink overheat fail ure] [P15] <Indication 1> <Indication 2> [Gas leakage detection ] Check code Outdoor LE D indication Check and Action procedure (No specific description ind icates outdoor unit parts.
96 Toshiba [P19] <Indication 1> <Indication 2> [4-w ay valve invert failur e] Outdoor c ontrol boar d operation c heck di rection ( Self-hold valve) 1) With the dip switch SW804 set as in the table below, pres sing SW801 for appr ox. 1 second can check the operation of s witching to coolin g cycle or to heating cycle.
97 Toshiba [P20] <Indication 1> <Indication 2> [Hi pressur e protectio n operation] Check code Outdoor LE D indication Check and Action procedure (No specific description ind icates outdoor unit parts.) No Yes Service valve is fully opened.
98 Toshiba [P22] <Indication 1> <Indication 2> [Blower system failu re] Outdoor fan sole oper ation chec k 1) With the dip switch SW804 set as in the table below, pres sing SW801 for appr ox. 1 second can chec k the outdoor fan sole o peration.
99 Toshiba No code <Indication 1> <Indication 2> [Discharge abnormalit y] Compres sor's loss of synchronism due to rapid load chang e, etc. * Although the outdoor LED indicates abnormality, the compres sor res tarts and no abnorma lity is confirme d.
100 Toshiba [F12] <Indication 1> <Indication 2> [Suction te mperature sen sor (TS) fai lure] [F13] <Indication 1> <Indication 2> [Heat sink te mperature se nsor (TH) failure ] .
101 Toshiba 9-4-3. Temperature sensor, temperat ure-resistance characteri stic table TC, TWI, TW O, TFI, TTW, T E, TS, TO sensor s TD, TL sen sors Typical v alue Typical v alue Temperature (°C) Resistance value (k Ω ) Temperature (°C) Resistance value (k Ω ) (Minimum) (Standard) (Maximum) (Minimum) (Standard) (Maximum) -10 55.
102 Toshiba 9-5. Operation check by PC board switch 9-5-1. Operation check mode This mode al lows to che ck the operat ions of the w ater 2-wa y valve, wat er 3-way valv e, mixing v alve, and c irculati ng pump. Operation check mode (1) Preparatio n • Turn all of the remote contr ols "OFF" for the ho t water supply and heating.
103 Toshiba 9-6. Brief method for checking the key components 9-6-1. Hydro unit No. Component name Check procedure 1 Water heat exch ange temperature (TC) sensor Water inlet te mperature (TWI) s ensor.
104 Toshiba 9-6-2. Outdoor unit No. Component name Check procedure 1 Compresso r Ty pe DA220A2F-22 L (802H-E) DA422A3F-25 M (1102,1402H- E) Measure the resist ance valu e of each winding with a tester. 2 Outdoor fan moto r Ty pe ICF-280-A 60-1 (802H-E) ICF-280-A 100-1 (1102,1402H- E) Measure the resist ance valu e of each winding with a tester.
105 Toshiba 10 Hydro unit and Outdoor Unit Settings Hydro unit 1. Hydro unit Setting 1-1. Setti ng sw itch names and posi tions 1-2. SW02 ( Syste m switching 1) 1-3. SW10 ( Pump switching) 1-4. SW11 (H eater Yes/ No sw itching) 1-5. SW12 ( Syste m switching 2) 1-6.
106 Toshiba 2. Hydro unit Func tion Code Setting 2-1. How to set func tion code <Procedure> Perform the following when no opera tion is in progress. 1 Press the SET and TEST and SELECT buttons at the same time for 4 seconds or longer. (See display ) 2 Specify CODE NO.
107 Toshiba Function code table FC Item Details First shipment 01 Water heat exchanger capacity 0012: 802XWH**-E 0017: 1402XWH**-E Depends on type 02 Cooling/Non-cooling switching 0000: Cooling 0001: .
108 Toshiba Remote contr oller func tion code table FC Item Details Fist shipment 05 24H/12H display switching 0: 24H display 1: 12H (AM/PM) display 0: 24H display 09 Nighttime low-noise mode 0: Disab.
109 Toshiba 3. Trial Operation <Procedure> A trial op eration is availabl e with an act ual operati on in progres s or stopped. A trial oper ation is av ailable i n any of the hot wate r supply, heat ing, or cool ing mode. The co mpressor st arts accord ing to the tri al operati on frequency.
110 Toshiba 4. Auto Curve Setting FC code sett ing can make fl exible A uto-Curve setting s. <Preparation > 1 Press the TEST and SET and SELECT buttons at the same time for 4 seconds or longer. (See display ) (Make sure t hat no operati on is in pr ogress.
111 Toshiba 5. Time Setting 1 Press the TIME button for 4 seconds or longer. ( The screen moves to the t ime setting mode.) (See display ) Day, time, , and ind ications blink. (Time sett ing is avai lable d uring an operat ion.) 2 Specify a day to be set.
112 Toshiba 6. Scheduled Operation Setting Schedule set ting makes th e following m odes to b e flexibly se t: hot water supply, he ating, cooling , hot water supply and heating , hot water su pply and cooli ng, and stop, and set tempera ture. 6-1. How to set sc hedule d operatio n <Preparation > Set the remot e controll er time.
113 Toshiba 6-2. How to star t and cancel schedul e operation <Operati on start> Without sche dule ope ration set, press the r emote cont roller SCHEDULE butto n. blinks. Pressin g the SET button during the 5- second bli nking chang es to lit, and the sc hedule operat ion starts .
114 Toshiba 8. NIGHT Operation Setting For nightti me hours, th is setti ng changes set temperatur e of heating o r cooling by 5k as save operat ion. 1 Press the ZONE1,2 button to start a heating or a cooling operation. (See display ) (Nightt ime operati on is not avai lable for hot water sup ply.
115 Toshiba 9. Anti Bacteria Setting This sett ing regular ly raises th e hot water cyl inder temper ature to preve nt bacteri a from growin g. 1 Press the HOT WATER button to start a hot water supply operation. (Normal hot water su pply oper ation) (No anti ba cteria s etting is provided to he ating and coo ling.
116 Toshiba 10. Hot Wate r Boost Settin g This sett ing heats the water whenev er necessar y by using the heat pu mp and hot water cylinder heat er. 1 Press the HOT WATER button to start a hot water supply operation. (Normal ho t water suppl y operation) 2 Pressing the HOT WATER BOOST button display s the symbol.
117 Toshiba 12. Forced Defrosting Setting The FC code set ting (See 2- 2) can activ ate the force d defrosti ng mode for the out door unit ope ration. (Preparation ) 1 Press the remote controller buttons, TEST , SET , and SELECT , at the same time for 4 seconds or longer.
118 Toshiba 14. Display Function of Set Temperature and Other Settings ■ Sensor temperature display calling <Details> This func tion call s the servi ce monito r mode from the remote contr oller to show the da ta of the remot e controll er, the hydro uni t, and outdoor unit.
119 Toshiba 15. Failure History Calling Function <Details> This functio n calls the previous fa ilure details. <Procedure> 1 Press the TEST and SET buttons at the same t ime for 4 seconds or longer to call the service check mode. The service check lig hts up with CODE No.
120 Toshiba Outdoor unit 16 Outdoor Unit Setting 16-1. Refrige rant recov ery con trol Although HFC refrig erant is "Oz one depleti on potential = 0", emiss ion control is applie d to it as a greenho use effect gas.
121 Toshiba 16-3. Ser vice support funct ions (LED indi cation, Sw itch operation method) The follow ing setti ngs are avai lable wi th dip swi tches. (1) Overview Using 3 di p switc hes (SW802, S W803, SW8 04) and 2 push- button swi tches (SW 800, SW801) can make set tings availabl e and con firm oper ations.
122 Toshiba (2) LED indicatio n switchi ng (SW800, S W803 operati on) (2) -1. Indication sw itching list Operating SW803 can swi tch the ind ications of LED D800 t o D804 on the outd oor control board. Swit ch Function and details Abnormality indicat ion (Curr ent abnorma lity) This s witch indicat es the c urrent abnor mality.
123 Toshiba (2) -2. Abnormalit y indicati on The current ab normality an d the latest abnormalit y (includi ng the current one) can be iden tified by the LED D800 to D 804 on the outdoo r control bo ard. 1) Setting all th e SW803 d ip switches to OFF indica tes the curr ent abnor mality statu s.
124 Toshiba (2)-3. Sens or, Current , Compres sor operati on frequency, P MV openness ind ication The value s detecte d by con troller, suc h as temp erature se nsor or cu rrent value s, can be easily che cked. * TD, TL, and TH show er rors below t he ordinar y temper ature beca use they are sensor s for high te mperature .
125 Toshiba (3) Special operati on for maintena nce and inspe ction (SW 801, SW804) SW801 and SW 804 can perfor m the follow ing speci al operatio ns for maint enance and inspe ction. 1) Switches the dip switch SW80 4. (See th e table be low) 2) Pres ses the push- button swi tch SW801 fo r approx.
126 Toshiba (Note 1) The forced trial opera tion with this setti ng cannot be can celled by the re mote control ler in the hydr o unit. Be sure to ca ncel the oper ation from t he outdoor uni t.
127 Toshiba 11 How to Exchange Main Parts 1. Hydro Unit WARNING <Turn off the pow er breaker> Because the electrical components are energized w ith high voltage, always turn off the po wer b reaker before starti ng to w ork.
128 Toshiba 2 Remote controll er 1.How to remove 1) Perform the s tep 1-1. 2) Remove the remote c ontroller from the holder using a flat-blade s crewdriver. ( Release the s topper.) 3) Disconnect the remote cont roller cabl e from the terminal bloc k on the back s ide of the remote controller .
129 Toshiba 4 Relay board MCC-1431 1. How to remove 1) Perform the s tep 1-1. 2) Disconnect the connector s and lead cables connected to other parts fr om the relay board.
130 Toshiba 6 Side board 1. Side board ( Right) 1) Perform the s tep 1-1. 2) Remove the fixed scr ews of the side board (R ight). (ST1T Ø4 × 10 , 5 screw s) 3) Remove the fixed scr ews of the side board (R ight) and the manometer fixi ng board. (ST1 T Ø4 × 10, 2 screws) 2.
131 Toshiba 9 Expansion ves sel 1) Perform the step 1-1 , step 5, 6, and 7. 2) Remove the fixed band of the exp ansion vess el. (ST1T Ø4 × 8, 4 screw s) 3) Remove the expansion v essel conn ection (thr ee- piece flare nut ). Replace the pac king to new one when installing the expansion ves sel.
132 Toshiba 12 Pump 1. How to remove 1) Perform the step 1-1 , step 5, 6, and 10. 2) Remove the fixed scr ews of the pump fixing board. (ST1T Ø4 × 8, 2 screw s) 3) Remove the 2 nuts of t he heater connec tion and the lower side of the pump. 4) Remove the pump fixing boar d.
133 Toshiba 13 Flow switch 1. How to remove 1) Perform the step 1-1 and step 5. 2) Remove the flow switch. 2. How to attach 1) Attach a new flow sw itch i n the reve rse order of the removal.
134 Toshiba 15 Heater ass embly 1. How to remove 1) Perform the step 1-1 , step 5, 6, 7, and 11. 2) Remove the nut of the heater connection . 3) Remove the 2 fixed scr ews of the heater. 4) Pull the heater out upward. 5) Remove the insulato r from the heater.
135 Toshiba 17 Water heat exchanger ass embly 1. How to remove 1) Perform the step 1-1 , step 5, 6, and 8. 2) Remove the water pipe fixing board . (ST2T Ø4 × 8, 2 screw s) 3) Remove the refriger ant piping fixin g board. (ST2T Ø4 × 8, 3 screw s) 4) Remove the nut of the heater connection .
136 Toshiba 2. Outdoor Unit 2-1. HWS-802H-E No. Exchange parts name Work procedure Re marks 1 Common procedure Note Wear gloves w hen per forming the w ork. Failure to do so may cause an injur y w hen accidental ly contacting the parts. 1. How to remove 1) Stop the operation by remote contr oller and turn off the breake r.
137 Toshiba 2 Outlet cabinet How to remove 1) Perform the s tep 1-1. 2) Remove the screws of the out let cabinet and parting boar d. (ST1T Ø4 × 8, 3 screw s) 3) Remove the screws of the out let cabinet and bottom board. (Hex Ø4 × 10, 2 sc rews) 4) Remove the screws of the out let cabinet and motor base .
138 Toshiba 4 Electri c parts replacement 1. Control board 1) Perform the s tep 1-1. WA RNING For 1 minute after the p ow er is turne d off, do not disassemble t he inverter to prevent an el ectric shock. 2) Remove the connect or connected to the control board.
139 Toshiba 4 Electri c parts replacement 2. Reactor 1) Perform the s tep 1-1. 2) Remove the relay connector c onnected to the control bo ard. 3) Cut the binding t ie that binds the compr essor l eads and relay connectors . 4) Remove the reactor . (Truss B tight screw Ø4 × 6, 2 screws) 5) Attach a new reactor.
140 Toshiba 5 Fan m otor 1) Perform the step 1-1 and step 2. 2) Remove the fan motor and the flang e nut that fixes the propelle r fan. • To loosen the flan ge nut, turn it c lockwise. (Turn it cou nterclockw ise for ti ghtening .) 3) Remove the propeller fan.
141 Toshiba 6 Compresso r Compressor le ad 1. Remove defect ive compres sor 1) Perform refriger ant gas recov ery. 2) Perform the s tep 1-1 and s tep 2 and 3. 3) Remove the piping panel (F ront). Remove scr ews of the piping panel (Fr ont) and bottom board.
142 Toshiba 6 Compresso r Compressor le ad 10) Remove the dischar ge and suc tion pipes connected to the c ompressor by using a burner . WA RNING When removing th e piping by bur ning the sol der, take enough car e for a fire go ing off at th e moment the w ax melts if oil r emains insid e the piping.
143 Toshiba 6 Compresso r Compressor le ad 2. Attach the compress or 1) Attach the compr essor in the rever se order of the removal. Note) • Be sure to repl ace the compr essor le ad after the compress or replac ement. (Compr essor l ead spare parts code: 43160591) At this tim e, w ind the ferrite core wi th the compress or lead for 4 times.
144 Toshiba 6 Compresso r Compressor le ad 3. Vacuuming 1) Connect the vacuu m pump to the charge por t of the gas pipi ng valve t o operate the v acuum pump. 2) Perform vacuumi ng until the vacuum low press ure gauge shows 1(mmHg). Note) Open fully the pulse motor v alve before vacuuming.
145 Toshiba 8 Fan guard 1. How to remove 1) Perform the s tep 1-1 and s tep 2. Note Perform a r eplacement w ork on cardboard or cloth to pr event the product f rom being damaged. 2) Remove the outlet cabi net and put with the fan guard side down. 3) Release the hook s (8 pos itions) of the fan guard.
146 Toshiba 2-2. HWS-1102H-E, 1402H-E No. Exchange parts name Work procedure Re marks 1 Common procedure Note Wear gloves w hen per forming the w ork. Failure to do so may cause an injur y w hen accidental ly contacting the parts. 1. How to remove 1) Stop the operation by remote contr oller and turn off the breake r.
147 Toshiba 2 Outlet cabinet How to remove 1) Perform the s tep 1-1. 2) Remove the screws of the out let cabinet and parting boar d. (ST1T Ø4 × 8, 4 screw s) 3) Remove the screws of the out let cabinet and bottom board. (Hex Ø4 × 10, 2 sc rews) 4) Remove the screws of the out let cabinet and motor base .
148 Toshiba 4 Electri c parts replacement 1. Control board 1) Perform the s tep 1-1. WA RNING For 1 minute after the p ow er is turne d off, do not disassemble t he inverter to prevent an el ectric shock.
149 Toshiba 4 Electri c parts replacement 2. Reactor 1) Perform the s tep 1-1. 2) Remove the react or lead conn ected to the control board. CN05 White, CN06 Whit e 3) Cut the binding t ie that binds the compr essor l eads and fan motor leads . 4) Remove the reactor .
150 Toshiba 5 Fan m otor 1) Perform the step 1-1 and step 2. 2) Remove the fan motor and the flang e nut that fixes the propelle r fan. • To loosen the flan ge nut, turn it c lockwise. (Turn it cou nterclockw ise for ti ghtening .) 3) Remove the propeller fan.
151 Toshiba 6 Compresso r Compressor le ad 1. Remove defect ive compres sor 1) Perform refriger ant gas recov ery. 2) Perform the s tep 1-1 and s tep 3. 3) Remove the pi ping panel (Front ). Remove scr ews of the piping panel (Fr ont) and bottom board.
152 Toshiba 6 Compresso r Compressor le ad 2. Attach the co mpressor 1) Attach the compr essor i n the rever se order of the removal. Note) • Be sure to repl ace the compr essor le ad after the compress or replac ement. (Compr essor l ead spare parts code: 43160591) At this tim e, w ind the ferrite core wi th the compress or lead for 4 times.
153 Toshiba 7 Pulse m otor valve co il 1. How to r emove 1) Perform the s tep 1-1. 2) Remove the coil from t he pulse motor v alve body by pulling upward while rotating the coil. 2. How to atta ch 1) Fix the coil by exactly adjustin g the coil pos itioning project ion to the r ecess of the puls e motor v alve body.
154 Toshiba 12 Periodic Inspection Items For a long-te rm safe operat ion of this equipment, pe rform perio dic inspec tion and part s replaceme nt. <Inspection items> Hydr o unit (HWS-802**-E, 1402**-E) Frequency Periodic inspection details 1.
155 Toshiba 13 Part Exploded View, Part List Hydro Unit 201 203 208 202 219 236 218 209 210 211 213 203 214 215 206 216 207 212 204 205 217 +00A09-002_01EN_SVM_ALL_ Air_to_Water.
156 Toshiba 220 223 235 234 222 225 226 231 232 229 228 235 233 230 221 224 227 +00A09-002_01EN_SVM_ALL_ Air_to_Water.book Page 156 Monday , October 5, 2009 2:09 PM.
157 Toshiba Safety Locatio n No. Part No. D escription Number of pieces per un it HWS- 1402XW HM3-E HWS- 1402XW HT6-E HWS- 1402XW HT9-E HWS- 802XWH M3-E HWS- 802XWH T6-E 201 37500802 CABINET, FRONT 11.
158 Toshiba Outdoor Unit (HWS-802H-E) 021 016 015 023 022 029 020 024 013 019 005 030 028 031 032 026 017 004 003 006 027 025 034 008 007 035 010 009 011 033 002 001 014 018 012 +00A09-002_01EN_SVM_ALL_ Air_to_Water.
159 Toshiba Safety Locatio n No. Part No. D escription Number of pieces per un it HWS-802H-E 001 43019904 HOLDER, SENSOR 1 002 43032441 NIPPLE, DRAIN 1 003 43041798 COMPRESSOR, DA220A2F-22L 1 004 4304.
160 Toshiba Inverter Assembly (HWS-802H-E ) 1 1 2 2 3 3 R R S S T T 703 Sensor assembly (F4) TD, TL sensor TS, TE, TD sensor 705 707 T erminal (3P) Fuse 706 T erminal 3P 708 Sensor holder (TO) 702 Sen.
161 Toshiba Safety Locatio n No. Part No. D escription Number of pie ces per unit HWS-802H-E 701 43050425 SENSOR ASSY, SERVICE 3 702 43063325 HOLDER, SENSOR 1 703 43150319 SENSOR ASSY, SERVICE 2 704 4.
162 Toshiba Outdoor Unit (HWS-1102H-E, 1402H-E) 020 015 021 022 029 030 017 013 018 028 026 032 019 014 011 031 024 034 035 001 002 033 027 037 004 003 016 025 006 009 008 005 010 012 007 036 023 +00A09-002_01EN_SVM_ALL_ Air_to_Water.
163 Toshiba Safety Locatio n No. Part No. D escription Number of pieces per un it HWS-1102H-E HWS-1402H-E 001 43019904 HOLDER, SENSOR 3 3 002 43032441 NIPPLE, DRAIN 1 1 003 43041794 COMPRESSOR, DA422A.
164 Toshiba Inverter Assembly (HWS-1102H-E, 1402H-E) 1 1 2 2 3 3 R R S S T T 703 Sensor assembly (F4) 705 707 T erminal (3P) Fuse 706 T erminal 3P 708 Sensor holder (TO) 702 Sensor holder (TE) 711 Control board assembly Reactor 710 Collar 709 Bushing 701 Sensor assembly (F6) TD, TL sensor TS, TE, TO sensor 704 +00A09-002_01EN_SVM_ALL_ Air_to_Water.
165 Toshiba Safety Locatio n No. Part No. D escription Number of pieces per un it HWS-1102H-E HWS-1402H-E 701 43050425 SENSOR ASSY, SERVICE 3 3 702 43063325 HOLDER, SENSOR 1 1 703 43150319 SENSOR ASSY.
166 Toshiba +00A09-002_01EN_SVM_ALL_ Air_to_Water.book Page 166 Monday , October 5, 2009 2:09 PM.
Toshiba +00A09-002_01EN_SVM_ALL_ Air_to_Water.book Page 167 Monday , October 5, 2009 2:09 PM.
An important point after buying a device Toshiba HWS-1402XWHM3-E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba HWS-1402XWHM3-E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba HWS-1402XWHM3-E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba HWS-1402XWHM3-E you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba HWS-1402XWHM3-E will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba HWS-1402XWHM3-E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba HWS-1402XWHM3-E.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba HWS-1402XWHM3-E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba HWS-1402XWHM3-E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
