Instruction/ maintenance manual of the product DK 280 Toshiba
Go to page of 65
Telecommunication Systems Division Digital Business Telephone System Release 3 Liquid Crystal Display Digital Telephone User Guide.
.‘..... Strata General End User Information The Strata Digital Business Telephone System is registered in accordance with the provisions of Part 68 of the Federal Communications Commission’s Rules and Regulations. Important Notice - Music-On-Hold In accordance with U.
. . . Contents Introduction Organization ..................................................................................................................................................... V Conventions ..............................................
._ Chapter 2 - Feature Operation (continued) Voice Mail (VM) .................................................................................................................................... 27 Assign a Voice Mail Message Mailbox ..................
( Figures 1 Sample Page.. ....................................................................................................................................... vii 2 20-button Digital Speakerphone with Liquid Crystal Display.. ......................
: ,:.: . . iv.
Introduction This guide is for users of the 2000-series LCD telephones (models DKT2010- SD, DKT2020-SD, and DKTI 020-SD), and 1 OOO-series LCD telephones. This guide only covers the LCD functions of the digital telephone. Use it with the Strata DK Digital Telephone User Guide.
Conventions Letters in [brackets] represent buttons which have Directory Numbers on them. For example: [DN] = any Directory Number button (also known as an Extension or Intercom Number). [PDN] = Primary Directory Number button (the Extension Number for your telephone).
Chapter Titles - First Level Headings Action Text - Specific instructions on how to perform a procedure are numbered and entered in the left- hand column.
. . . VIII.
The Grand Tour provides a detailed overview of the visual and operational features of your Toshiba phone system. The Strata DK 2000-series Digital Liquid Crystal Display (LCD) telephone provides you with display information and feature prompting to make call handling more efficient.
Handset Red/Green LED Indicators Dial Pad T Message Waiting Button and LED Indicator i&i i Speaker ON/OFF - Button and LED Indicator Last Number Redial Button - LCD Display - LCD Control/Soft Key .
Liquid Crystal Display In its idle state, the 32-character Liquid Crystal Display (LCD) feature on your digital telephone gives you an accurate desk clock and calendar combination. When you have an outside call in progress, an elapsed time display gives a constant reminder of the call duration.
.:- ._ Scroll: n Scrolls through message waiting numbers. n Scrolls through the speed dial digits (if more than 16 digits) when in Mode 8. Note: If your telephone has the Soft Key feature turned on (Mode + 7 I), the Mode, Page, and Scroll functions are not active when the telephone is busy on a CO line or internal call.
Account Codes: [iiYizLz] m*mn [-iiizzy] Urn. [EilOt] CLrn.E [iTiiz?j mx [iiYzxz-] D<_ LCD Function Overview IMPORTANT ! All Liquid Crystal Display (LCD) examples in this user guide are shown with s.
Automatic Number Identification (ANI) and Caller ID calls: ANI Example lF!iFzLl CN:7145876782 ANSWERED LINE 3 I HOLD LINE 3 1 ISEP 9 TUE 18:301 If your telephone has been programmed with ANI capability, you may: n Activate ANI and/or Caller ID display mode by pressing Mode + 6 1.
CN:7145876782 ANSWERED LINE 3 Caller ID Example I MR. JONES LINE 3 RINGING Auto Busy Redial (ABR): I NO. 202 ABR SET I NO. NNN P583 3700 Automatic Callback (ACB): INNN ACB No’ NNNJ Wm.2 /,,,,,,l After the transferring station (station 201) hangs up.
When you receive an automatic callback for a CO Line, the seized line’s number Automatic line Selection: 1. [DN] i r- 2. CO Line USING 3. Dial Access Code /,,,,,I If your station automatically accesses a [PDN] when you go off-hook, the three character designation, “[NT” (Internal Dial Tone), displays to confirm this status.
Call Forward for [DNsl: Call Forward for In the Call Forward examples: LLL = the calling [DN] PPP, TTT, VVV = the “Call-Forward-From” Directory Number. RRR, SSS, UUU = the “Call Forward Destination” Directory Number. NO. NNN CALL FORWARD TO This LCD display appears when you begin to set any type of call forward.
Caller ID Calls: See Automa tic Number ldentifica tion on page 6. Call Pickup: [-Y-ZZj [ti] aa, Calling Number-Internal: [ELLL] aws CO Line Identification: “CF-A” denotes Call Forward-All Calls from PPP to RRR. Press Scroll. “CF-8” denotes Call Forward-Busy from PPP to SSS.
CO line Number: 1. 2. 3. 4. 5. 6. Incoming Call I NO. NNN LINE 10 RINGING 1 I NO. NNN CAMP-ON 4 1 When Call Is Answered Hold [::I;“,:‘::,‘:,:,,] m> Hold Recall Outgoing [,,,,,I -- CO Line Queuing (Callback) [LINE 3 AC!‘.
J : Date/Time: Dialed Number: 1. CO Line 2. Internal [DN] Dialed Number identification Service (DNIS) Calls: 1. Press Page to display date/time when talking on a Central Office (CO) line (Soft Keys must be off before the call is started). 2. The date/time is adjusted on a system-wide basis by the station located in port 00 (usually station 200).
TOSHIBA TSD LINE 3 CALLING For DNIS calls. I TOSHIBA TSD LN 3 CALL 201 1 When the call was forwarded to your station. When the call is transferred. I TOSHIBA TSD ANSWERED LINE 3 I When the call is answered. For calls that recall the transferring station Held call automatically recalls your station after a programmed period of time.
Elapsed Time: LCD Name/Number Display: 1. Idle Station 2. Called Station least Cost Routing (LCR): While you are making an outgoing Central Office (CO) line call, the call’s elapsed time is displayed. Elapsed time automatically replaces the dialed number on the display after a programmed period of time.
Message Waiting: Message Waiting/Voice Mail: Off-hook Call Announce: [,,,,::I:::] nssl [,,,,::;:::I OKMOJ Overrides: 1. Busy Override [,.,,::;:::I mobw When you set message waiting at another station, the number of that station is displayed.
: 2. Executive Override I NO. NNN MMM EXEC OVRD I NO. MMM NNN EXEC OVRD 3. Do Not Disturb (DND) Override NO. NNN MMM DND OVR 4. Privacy Override Recalling Station: [mj au-a Your LCD telephone displays the number of a station (MMM) initiating executive override when you are on the telephone.
Speed Dial Memo: *ll TOSHIBA 7145833700 Toll Restriction and Traveling Class Override Codes: G] El,,* Two-CO Line Calls: 1. Tandem [JA;“:;‘~:,“:lr:,j EljlY 2. Conference NO. NNN CONF LINE N1 N2 1 When using Speed Dial Memo (Mode + 8 + the speed dial number), the name and number are displayed.
18.
Feature Operation . To Set the Date: 1. Place handset on-hook. 2. Press a [DN] + # 6 5 1. 3. Enter the date. 4. Press Redial. 5. Press Spkr. To Set the Time: 1. Place handset on-hook. 2. Press a [DN] + # 6 5 2. 3. Enter the time. 4. Press Redial. 5. Press Spkr.
To Set the Day: 1. Place handset on-hook. 2. Press a [DN] + #653. 3. Enter the day (see codes on the right). 4. Press Redial. 5. Press Spkr. In the following examples, NNN = Directory Number which is being forwarded. MMM = the forward-to number. Call Forward Displays: 1.
3. Call Forward-No Answer 4. Call Forward-Busy/No Answer CF-BN:NNN-MMM JAN 26 TUE 01:43 5. Call Forward-Fixed 6. Call Forward-External [::iE:: TUE Bl:43] :‘*,,I Call Forward-No Answer All calls to your station when set with this feature will forward to a selected station if you fail to answer within a time that you designate.
Call Forwarding a Primary or Phantom Directory Number: 1. Press the [PDN] or [PhDN] that you want to Call Forward. [iii5ZF-] 1,;,,, 2. Enter a Call Forward Access Code (# 6 0 I- # 6 0 4). [pTTGGGE] mm.* 3. Dial the number to which calls will forward. 4.
To Cancel a Call Forward: 1. Press the [PDN] or [PhDN] you want to cancel Call Forwarding on. 2. Dial # 6 0 1. 3. Press Spkr. You will hear a steady dial tone and see a steady LED light. The dial tone will go silent, and the LED will flash intermittently.
Table 1 Paging Group and Zone Codes Paging Group Codes Paging Zone Codes # 3 1 l-Group A # 3 15-Group E # 3 5-Zone A # 3 12-Group B # 3 1 6-Group F # 3 6-Zone B # 3 I E-Group C # 3 17-Group G # 3 7-Zone C # 3 14-Group D # 3 1 &-Group H # 3 &-Zone D Enter code # 3 0 to page stations assigned to the All Call Page group.
TO Display Parked Calls: 1. Press Mode. [MOOE NO. ] r. .i 2. Press 6 4. ILN NN ORBIT XXX 1 3. Press Scroll to monitor the next parked call. 4. Press Scroll to monitor the next parked call. [LN 8 ORBIT 901t DID723 Park Orbit list Display This feature enables you to monitor (view) the calls that are parked at your station.
2. Press Scroll to view the saved information on the LCD display. n Press # to delete information on the LCD display. n Press * to go back to previous LCD screen.
4. To answer the Msg LED indication from the called station, press the flashing Msg button. 5. To clear the Msg LED that you set on some other telephone’s [DN] from the [DN] that sent the Message Waiting signal, press the [DN] button, dial the Directory Number that you set the MW signal on and press Msg twice (or 7 7).
:- Assigning a mailbox to store messages: 1. Press a [DN]. 2. Press # 6 5 6. I 656 ID CODE SET . 1 Assign a Voice Mail Message Mailbox Press the [DN] that you want to assign a mailbox number. When you assign a mailbox for a [DN], calls to that [DN] will be able to forward directly to the [DN]‘s voice mailbox on the Toshiba voice mail system.
To Clear All Digits: 1. Press a [DN]. 2. Dial # 6 5 6 or #657. 3. Press Redial. To Display Busy Field Status: 1. Press Mode. [no] m111 Press 1. 2. 3. Enter the first 1 or 2 digits of a [DN]. Press #. I 4. Press Page to rotate Busy Field groups. To Exit Any Mode: 1.
.: .~ .:.. . . . . 30.
Soft Key Operation 3, ro .’ The Soft Key feature provides a quick and easy way to access frequently-used features. If the Soft Key feature is activated at your station, abbreviated feature prompts will appear on the LCD above the Mode, Page, and Scroll keys while you are on a call (or you are ringing another station or outside telephone number).
Using Soft Keys to Make a Conference Call 1. While on an outside call with CO line (line 3 for this example) your LCD will display the following prompts: TALK ON LINE 3 TRNS CONF PGE Mode Page SCKJII .
. . “.- -. 3. To transfer to a station, press the STA. Soft Key. LINE OR STATION? LINE STA. RTRN n Whenever the RTRN Soft Key appears, you can terminate the operation and return to the outside call by pressing the RTRN Soft Key. 4. Dial a station number when the following LCD appears: DIAL STATION NO.
6. After three seconds the user’s name (or number) is replaced with the following display and you can voice announce to station 203: ANNOUNCE TO 203 TRNS RING RTRN or, when in TONE mode the following is displayed: RINGING 203 MESG TALK RTRN W You could stop the called station voice announce and make station 203 ring by pressing the RING Soft Key.
8. The LCD will appear as follows after you press the JOIN Soft Key in Step 5 and all parties will be conferenced. I LN3t203 EXIT CONF H “LN 3 + 203” indicates that you are in a Conference with CO line 3 and Station 203. n You can exit the Conference and the other parties will remain connected if you press the EXIT Soft Key.
EXEC-(Executive Override) Press to break into the conversation of a busy called station. ACB-Press to activate Automatic Callback after reaching a busy station, CO line, or CO Line group. ABR-Press to activate Automatic Busy Redial after dialing a busy outside telephone number.
Soft Key Deactivation To deactivate Soft Keys at your station: 1. Make sure your telephone is idle. Do not lift the handset. Your telephone must be idle before you follow the steps on the left to activate or deactivate the Soft Key feature at your station.
: : . ..
Messages and Memos To Store a Message in Memory: 1. Press LCD Msg Select - or - a rPDN1 + # 6 8. The LCD on your telephone can be used to send or receive messages to or from other LCD telephone users. It can also display the names/numbers of the person calling your telephone or the name of the person you are calling.
:- To Record a Message: 1. Press the # button to access alpha characters. Refer to Figure 4 for an explanation of the dial pad buttons. 2. Press * or 1 to move the cursor (-) to the desired position (the left edge of the display for a new message, or two spaces to the right of the preprogrammed message to add information).
.:- 5. The following special characters are set by pressing 1 and then pressing 0 to step through the available characters: Q, Z, :, -, +, /. Preprogramming System Messages /. . . ,,. : : 1: .,.. System messages can only be programmed or permanently changed at port 000, station number (usually 200).
. . .~. ::: . . To Create an LCD Message for Phones that Call Yours: 1. Press the LCD Msg Select - or - press a [PDN] + # 6 8). [iLiZ--] W>.‘> 2. Dial the number of the message you want. 3. Press LCD Msg Select - or - Spkr. To Cancel a Message that Has Been Set at Your Station: l Press LCD Msg Select.
Setting/Changing Calling Station Messages You can set a completely new, personalized message by overwriting any of the existing preprogrammed messages.
:I 3. Press Spkr. To Clear Name/Number Display: 1. Press a [DN] + #620. 2. Press Spkr. During clear: After clear: To Erase Name/Number Information: 1. Press a [DN] + #621. 2. Press 1 in the alpha mode to enter blanks. 3. Press Spkr. The new information is stored and will appear on the top line of the display.
To Enter Name/Number Information for Other Stations/Devices 1. Turn off Soft Keys by pressing Mode + 7 0, when your telephone is idle. 2. Press a [DN] + #6Zl. r”““““l EIOlj 3. Press Page. G] EmI- 4. Dial the [PDN] of the station for which the name/number information is to be recorded.
8. Repeat Steps 2 m 7 to enter more names/numbers. 9. To turn Soft Keys on again, press Mode + 7 1 when your telephone is idle. Notes: 1. To erase the name/number information of another station from station 200, repeat Steps I - 6 above and enter blanks in Step 5.
:- : 4. Enter the name or memo (refer to Recording a Message for method). 5. Press Mode. 6. Enter the desired telephone number (16 digits maximum). 7. Press Redial to record data in memory. To Dial a Speed Dial Number: 1. 2. 3. 4. 5. Press Mode when telephone is idle.
. . . . . -.- ‘_ :: :. To Check a Speed Dial Number: 1. Press Mode + 8 when telephone is idle. 2. Dial a two-digit speed dial number. 3. Press Page to scan the directory for the appropriate number/memo.
To Set a Called Station Message: 1. Press MODE + 7 0 to ensure that Soft Keys are off. 2. Dial the station Directory Number (station does not answer or is busy). 3. Press Mode. 4. Press 4. 5. Enter the desired message number. 6. Press Msg. 7. Press Spkr or hang up to release.
To Receive a Called Station Message: ) Press the Msg button. To Set a “Called Station” Message for Another Station or Group of Stations: 1. Press Mode. 2. Press 9 4. 3. Dial the “destination” Directory Number (or enter # 3 Ofor all stations, or # 3 1 - # 3 8 for groups).
: :. . To Set a Calling Station Message for Another Station: I. Press Mode when your telephone is idle. 2. Press 9 5. 3. Dial the destination [PDN]. 4. Press Page. 5. Enter the desired message number. 6. Press Page. 7. Press Mode. 8. Press 0. To Send a Message to a Busy Station: 1.
5. Press Page. To Return a Busy Station Message: 1. Press Mode. 2. Press 2. 3. Enter the desired message number. 4. Press Page. The LCD displays “MSG SEND”. The destination station beeps four times and the message is displayed for 30 seconds, or until the originating station hangs up.
Index 20-button digital speakerphone with liquid crystal display, 2 A account codes, 5 alphanumeric messages, 8 ANI, 4, 6, 12,25-26 auto dial lost calls, 25 auto busy redial, 7 automatic callback, 7-8.
called station messaging, 4, 49-50 group called station messaging, 50 remote calling station messaging, 4, 51 return a busy station message, 52 message waiting, 4, 15, 22, 26-27,35 messages and memos,.
TOSHIBA C. Toshiba America Information Systems, In-. Telecommunication Systems Division 9740 Irvine Boulevard, Irvine, CA 92718 Item Number: 4 0 1 6 1 10 D26-UG-DKTLCDR,a.
An important point after buying a device Toshiba DK 280 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba DK 280 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba DK 280 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba DK 280 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba DK 280 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba DK 280, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba DK 280.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba DK 280. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba DK 280 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
