Instruction/ maintenance manual of the product D-R410KU Toshiba
Go to page of 101
D-R410KU Printed in China 1VMN24696 / E7K7AUD TOSHIBA DVD VIDEO RECORDER D R410KU TOSHIBA DVD VIDEO RECORDER DVD VIDEO RECORDER D-R410 © 2008 T oshiba Corporation Owner’s Record The model number and serial number are on the back of your DVD Recorder.
2E N 2E N PRECA UTIONS This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
3 EN 3 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others PRECA UTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water.
4E N 4E N PRECA UTIONS The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the copyright laws of the United States and other countries, and may subject you to civil and/or criminal liability.
5 EN 5 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others PRECA UTIONS Servicing • Please refer to relevant topics on “TROUBLESHOOTING” on pages 92-95 before returning the product.
6E N 6E N C ONTENT S Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this Owner’s Manual . . . .
7 EN 7 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others CONTENTS Playback INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 47 Structure of Disc Contents . . . . . . . . . . . . . . .
8E N 8E N FEA TURES This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit.
9 EN 9 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others FEA TURES Discs for Recording, Playing back Disc type DVD-RW DVD-R DVD+RW DVD+R Logo For.
10 EN 10 EN Discs for playing back Disc Type DVD-VIDEO CD-DA CD-RW CD-R Logo Icon Files for playing back Type of title MP3 JPEG Icon Media CD-RW/-R CD-RW/-R is a trademark of DVD Format/L ogo Licensing Corporation. DVD is recorded in different color systems throughout the world.
11 EN 11 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others FUNCTIONAL OVERVIEW Front Panel ( * ) The unit can also be turned on by pressing these buttons. 1. I / y ON/STANDBY button Press to turn the unit on and off.
12 EN 12 EN FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
13 EN 13 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others FUNCTIONAL OVERVIEW ( * ) The unit can also be turned on by pressing these buttons. 1. INPUT SELECT button • Press to select the appropriate input.
14 EN 14 EN L1 1/ 5 1/ 5 - RW VR ORG 0:01:00 / 1:23:45 SP 1:53 2 5 61 3 7 4 4 * This is an example screen only for explanation. 1. Indicates a disc type and format mode. 2. Indicates a type of titles for VR mode DVD-RW . 3. Indicates a selected external input mode.
15 EN 15 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others 1. Format (DVD-RW, DVD+RW only) : Allows you to format the disc. 2. Finalize: Allows you to finalize a disc containing recorded titles. 3.
16 EN 16 EN FRONT P ANEL DISPLA Y GUIDE PM 1 4 2 3 1. : Appears in the afternoon with the clock display. 2. Title/Track and chapter mark : Appears when indicating a title/track number. : Appears when indicating a chapter number. 3. Current status of the unit : Appears when playback is paused.
17 EN 17 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below.
18 EN 18 EN Make one of the following connections, depending on the capabilities of your display device. S-VIDEO IN OUT S-VIDEO Y P R /C R P B /C B COMPONENT VIDEO OUT COMPONENT VIDEO IN Y P B /C B P .
19 EN 19 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others CONNECTION TO A TV WITH AN HDMI ™ COMPATIBLE PORT A simple 1-cable connection with a.
20 EN 20 EN *HDMI: High Definition Multimedia Interface Copyright protection system To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system).
21 EN 21 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others C ONNECTION T O AN A UDIO SY STEM • When you change the connections, all devices should be turned off. • Refer to the owner’s manual accompanying external devices for more information.
22 EN 22 EN INITIAL SET TING Turn on this unit for the first time, you need to follow these steps. 1 Press [I/ y y ON/STANDBY]. Before: Turn the TV on. Select the input to which the unit is connected. 2 Use [ K / L ] to select your desired language, then press [ENTER] to set language.
23 EN 23 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others SET TING THE CL OCK Set the clock before you try the timer programming. Clock Setting 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER].
24 EN 24 EN FORMA T TING A DISC Choosing the Recording Format of a Brand-New DVD-RW When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the unit.
25 EN 25 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others FORMA T TING A DISC Reformatting a Disc Manually If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”.
26 EN 26 EN SET TING A DISC T O PRO TEC T 1 Press [SETUP]. 2 Use [ K / L ] to select “DVD Menu”, then press [ENTER]. 3 Use [ K / L ] to select “Disc Protect OFF ON”, then press [ENTER]. e.g.) VR mode DVD-RW DVD Menu Format Finalize Disc Protect OFF ON Delete All Playlists 4 Use [ K / L ] to select “ Yes”, then press [ENTER].
27 EN 27 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others PLA Y ING THE DISCS IN O THER DVD PLA Y ERS 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER]. “General Setting” menu will appear.
28 EN 28 EN PLA YING THE DISCS IN OTHER D VD PLA YERS Finalizing a Disc 1 Press [SETUP]. 2 Use [ K / L ] to select “DVD Menu”, then press [ENTER]. “DVD Menu“ menu will appear. 3 Use [ K / L ] to select “Finalize”, then press [ENTER]. 4 Use [ K / L ] to select “ Yes”, then press [ENTER].
29 EN 29 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others PLA YING THE DISCS IN OTHER D VD PLA YERS To cancel finalizing... (DVD-RW only) Press [STOP C ] during the finalizing is in progress. Use [ K / L ] to select “Yes”, then press [ENTER] .
30 EN 30 EN INFORMA TION ON DVD REC ORDING You can select a recording mode among 5 options, and the recording time will depend on the recording mode you select as follows.
31 EN 31 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others SET TINGS FOR THE VIDEO INPUT You must let the unit know which video input jack you are using before making a recording. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER].
32 EN 32 EN SET TINGS FOR A REC ORDING Use this feature to make the discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title list is automatically converted to our style.
33 EN 33 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others SET TINGS FOR A REC ORDING You can enjoy high quality sound recording. This function works only when the recording mode is set at XP. 1) Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER].
34 EN 34 EN BASIC RECORDING & ONE-TOUCH TIMER RECORDING 1 Press [I/ y y ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. 2 Press [OPEN/CLOSE A ] to open the disc tray and insert your disc with its label facing up.
35 EN 35 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others BASIC REC ORDING & ONE- TOUCH TIMER REC ORDING 7 Press [STOP C ] to stop recording. The recorded title will be included in the title list.
36 EN 36 EN TIMER REC ORDING 1 Press [TIMER PROG.]. 2 Use [ K / L ] to select “New Program”, then press [ENTER]. Timer Programming 1/1 TUE JAN/01 10:00AM Date Start End L1/L2 New Program • If there are 6 or more programs, use [SKIP j / i ] to change pages.
37 EN 37 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others 3 Use [ K / L ] to enter the date, then press [ B ].
38 EN 38 EN Checking, canceling, or correcting the timer programming information If the timer program did not complete correctly, the error number appears in the timer pro- gramming list. 1) Press [I/ y ON/STANDBY]. 2) Press [TIMER PROG.]. 3) Check the information on the list you want to edit.
39 EN 39 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others TIMER REC ORDING Hints for Timer Recording PROG. A PROG. B actual recording PROG. A PROG. B When the starting time is the same: A program set previously (PROG.
40 EN 40 EN SA TELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Preparing for the satellite link timer recording: Preparation on the tuner • The external tuner should be equipped with some kind of timer function.
41 EN 41 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others SA TELLITE LINK Note • If the signal of external input breaks up over 5 seconds, satellite link function will be canceled. • If you have not set the clock, “Clock Setting” menu will appear at step 1.
42 EN 42 EN SET TINGS FOR AN EXTERNAL DEVICE IN OUT Y P R /C R P B /C B L R L R VIDEO IN VIDEO OUT S-VIDEO AUDIO IN (L1) S-VIDEO AUDIO OUT HDMI OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUTPUT PCM / BITST.
43 EN 43 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others 1080p REC PLAY STOP SKIP 1080i 720p 480p S-VIDEO VIDEO L R DV IN L2 DVD -RW/R +R W/R R.
44 EN 44 EN DV DUBBING Guide to DV and On-Screen Display This function helps you to easily dub the contents of the DVC (digital video camcorder) to DVD. You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DVC is in video mode.
45 EN 45 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others DV DUBBING DVC to DVD Dubbing Insert a recordable DVD-RW/-R or DVD+RW/+R and make sure your DVC is in video mode. 1 Use [INPUT SELECT ] to select “DV”.
46 EN 46 EN DV DUBBING 5 Press [PLAY B ] to find the point where you wish to start dubbing. Then, press [STOP C ] where you wish to start dubbing. 6 Use [ K / L ] to select “Start Rec”, then press [ENTER]. The dubbing will start. 7 To stop dubbing; Use [ K / L ] to select “Control”, then press [ENTER].
47 EN 47 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others INFORMA TION ON PLA Y BA CK Structure of Disc Contents The contents of DVD are generally divided into titles, and the titles are subdivided into chapters.
48 EN 48 EN BASIC PLA Y BA CK Direct Playback 1 Press [I/ y y ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. 2 Press [OPEN/CLOSE A ] to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide.
49 EN 49 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others BASIC PLA YBA CK 1 Press [I/ y y ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. 2 Press [OPEN/CLOSE A ] to open the disc tray and insert your disc with its label facing up.
50 EN 50 EN BASIC PLA YBA CK Playing Back an Audio CD and a CD-RW/-R with MP3/JPEG Files 1 Follow steps 1 to 2 in “Direct Playback” on page 48. 2 Press [OPEN/CLOSE A ] to close the disc tray. It may take awhile to load the disc completely. File list will appear automatically.
51 EN 51 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others BASIC PLA YBA CK Using the Title/Disc Menu DVD may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc.
52 EN 52 EN SPECIAL PLA Y BA CK You can skip TV commercials to enjoy the recorded programs without interrupting. During playback, press [INSTANT SKIP]. Normal playback will start at 30 seconds ahead from where you press [INSTANT SKIP] . Every time you press [INSTANT SKIP] , the searching point will be extended by 30 seconds ahead.
53 EN 53 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others SPECIAL PLA YBA CK Rapid playback function is available only during playback.
54 EN 54 EN SPECIAL PLA YBA CK Zoom Note • When selecting a smaller factor than the current one, the zoom area will not be displayed. • To exit the zoom menu, press [DISPLAY] repeatedly. • To cancel the zoom function, select “x1.0” using [ K / L ] , then press [ENTER] at step 3.
55 EN 55 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others SPECIAL PLA YBA CK Chasing Playback during Recording Note • Playback image may freeze momentarily using this function. However, this does not affect the recording.
56 EN 56 EN You can also play back a recorded title during current recording or the timer recording on the same disc. 1) During recording, press [DISPLAY]. Screen for the current recording: L1 31 1:23:45 - RW VR ORG 2) Select icon using [ { / B ], then press [ENTER].
57 EN 57 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others SEARCH Using [SKIP j ] / [SKIP i ] 1) During playback, press [SKIP i ] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time.
58 EN 58 EN • For audio CD, skip to step 2. 1) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [ENTER]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 CD 0:00:15 / 0:05:00 The number next to will be highlighted.
59 EN 59 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Repeat Playback Random Playback Available repeat function may vary depending the discs. • For audio CD or MP3, skip to step 2, or press [REPEAT] and skip to step 3.
60 EN 60 EN Program Playback Note • To erase tracks you selected, press [CLEAR] at step 4. • You can make program settings up to 50 tracks. • To cancel program playback, press [STOP C ] twice during program playback. “OFF” appears on the TV screen.
61 EN 61 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others DVD-video may have subtitles in one or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages during playback.
62 EN 62 EN You can enjoy stereophonic virtual space through your existing 2 channel stereo system. • For audio CD or MP3, skip to step 2. 1 ) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [ENTER] within 1 second, or wait for 1 second to display the selection menu.
63 EN 63 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others You can adjust the black level to control the brightness of the picture in order to get a better picture. 1)During playback, press [DISPLAY].
64 EN 64 EN INFORMA TION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TOP MENU].
65 EN 65 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others DELETING TITLES Note • If you delete the title in DVD+RW, deleted title will be displayed as “Empty”.
66 EN 66 EN DELETING TITLES You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. Be sure to read “Notes for deleting titles” on page 65 before you delete the title.
67 EN 67 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others Adding Titles to a Playlist Playlist For VR mode DVD-RW, you can create the playlist as you wish. You can add up to 99 titles to a playlist (as long as the total number of the playlist does not exceed 999 chapters).
68 EN 68 EN CREA TING/DELETING PLA Y LIST Erasing All Playlist Playlist A playlist can be deleted if it is no longer needed. 1 Press [SETUP]. Main menu will appear. 2 Use [ K / L ] to select “DVD Menu”, then press [ENTER]. 3 Use [ K / L ] to select “Delete All Playlists”, then press [ENTER].
69 EN 69 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others Putting Names on Titles 4 Use [ K / L ] to select “Edit Title Name”, then press [ENTER].
70 EN 70 EN 1) Use [ K / L ] to select a desired character set, then press [ENTER]. 2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears. ABC DEF GHI JKL MNO PQRS TUV WXYZ abc def ghi jkl mno pqrs tuv wxyz ! ” # $ % & ’ ( ) * + , - .
71 EN 71 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others EDITING DISCS Setting Chapter Marks 1 Follow steps 1 to 3 in “Putting Names on Titles” on page 69 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [ENTER].
72 EN 72 EN EDITING DISCS Hiding Chapters Note • ”Hidden” will be displayed in the preview window while previewing the hidden chapter. • When you make all chapters in the title “Hidden”, “Hidden” is displayed in a thumbnail of the title list.
73 EN 73 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others Deleting a Part of a Title 1 Follow the steps 1 to 3 in “Putting Names on Titles” on page 69 to display “Edit” menu. 2 Use [ K / L ] to select “Scene Delete”, then press [ENTER].
74 EN 74 EN EDITING DISCS Deleting a Part of a Title (cont’d) 4 Use [ K / L ] to select “Delete” then press [ENTER]. Edit - Scene Delete Start End Preview Delete JAN/ 1/08 12:00AM L1 LP 1 PL 1 : 47 : 00 5 Use [ K / L ] to select “Yes” then press [ENTER].
75 EN 75 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others EDITING DISCS Dividing a Title Playlist You can divide one title into two new titles.
76 EN 76 EN EDITING DISCS Combining Titles 1 Follow the steps 1 to 3 in “Dividing a Title” on page 75 to display “Edit” menu. 2 Use [ K / L ] to select “Title Combining”, then press [ENTER].
77 EN 77 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others EDITING DISCS Setting or Releasing the Title Protection 1 Follow the steps 1 to 3 in “Putting Names on Titles” on page 69 to display “Edit” menu.
78 EN 78 EN EDITING DISCS Setting or Clearing All Chapter Marks at Once 1 Follow the steps 1 to 3 in “Putting Names on Titles” on page 69 to display “Edit” menu.
79 EN 79 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others LIST OF THE DEF A UL T SET TINGS The following table is the contents which you can set and the default settings. Refer to the following table for useful operation.
80 EN 80 EN Setup Items (highlight is the default) Contents General Setting Display V-Chip Canadian English Rating → page 87 18+ 14+ PG G C8+ C E Set the viewing limitation according to Canadian English Rating. Change Password → page 87 Change the password.
81 EN 81 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others GENERAL SE T TING Press [STOP C ] if you are playing back a disc. 1 Press [SETUP] and use [ K / L ] to select “General Setting“, then press [ENTER].
82 EN 82 EN GENERAL SET TING 1 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.
83 EN 83 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others GENERAL SET TING 2 Audio Out Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [ K / L ] to select a desired item, then press [ENTER] .
84 EN 84 EN GENERAL SET TING 3 Disc Menu Language (Default : English) Set the language for disc menu. Use [ K / L ] to select a language, then press [ENTER].
85 EN 85 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others 1 OSD Language (Default : English) Set the language for the on-screen display.
86 EN 86 EN 4 V-Chip With the v-chip system in this unit, you can set the viewing limitation for the analog/digital TV programs received from the external tuner or recorded on DVDs to prevent your children from watching inappropriate programs.
87 EN 87 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others GENERAL SET TING [Canadian English Rating] Rating Category 18+ Adult audience only hig.
88 EN 88 EN GENERAL SET TING 1 Progressive (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.
89 EN 89 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others 1 Press [SETUP] in stop mode and use [ K / L ] to select “General Setting”, then press [ENTER]. 2 Use [ K / L ] to select “HDMI”, then press [ENTER].
90 EN 90 EN 2 HDMI Audio (Default : ON) If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUTPUT jack to your audio system, etc.), you can set the HDMI audio output off. Use [ K / L ] to select a setting, then press [ENTER].
91 EN 91 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others Reset the setting to default. 1 Press [SETUP] in stop mode and use [ K / L ] to select “General Setting”, then press [ENTER]. 2 Use [ K / L ] to select “Reset All”, then press [ENTER].
92 EN 92 EN TROUBLESHOO TING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
93 EN 93 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others TROUBLESHOO TING Symptom Remedy Playback The disc does not play back. • No disc is inserted. • A blank disc is inserted. • The disc is upside down.
94 EN 94 EN TROUBLESHOO TING Symptom Remedy DV DV signal cannot be input. • Before connection, turn on the power supplies for both this unit and the DVC, and make sure that these units are in stop mode. • Only a “DVC-SD” signal can be input from the DVC to this unit.
95 EN 95 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others TROUBLESHOO TING Error message Cause Solution Disc Error — Please eject the disc. — Playback feature may not be available on this disc.
96 EN 96 EN LANGU A GE C ODE Language Code Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5.
97 EN 97 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound.
98 EN 98 EN SPECIFICA TIONS General System DVD-RW/-R, DVD+RW/+R, DVD-video, CD-DA, CD-RW/-R Power requirements AC120 V, 60 Hz Power consumption 18 W (standby: 2.
99 EN 99 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others LIMITED W ARR ANTY Limited United S tates Warranty Digital Audio Video (“DA V”) Product - Exchange W arranty T oshiba America Consumer Products, L.
100 EN 100 EN LIMITED W ARR ANTY /LPLWHG&DQDGLDQ:DUUDQW )RU7RVKLED%UDQG'LJLWDO$XGLR9LGHR3URGXFWV 7R V KLEDRI&DQDGD/LPLWHG7&/PDNH V .
101 EN 101 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup Others LIMITED W ARR ANTY ,)7+('$93 5 2'8&7) $,/ 6 72:2 5 .
An important point after buying a device Toshiba D-R410KU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba D-R410KU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba D-R410KU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba D-R410KU you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba D-R410KU will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba D-R410KU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba D-R410KU.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba D-R410KU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba D-R410KU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
