Instruction/ maintenance manual of the product B-850 Toshiba
Go to page of 116
TEC Label/Tag Printer B-852-TS12-QQ Owner's Manual.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Safety Summary EO1-33029 ( ) i 6DIHW6XPPDU Personal safety in handling or maintaining the equipment is extremely im portant. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipm ent.
Safety Summary EO1-33029 ( ) ii If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorized TOSHIBA TEC representative for assistance.
EO1-33029 TABLE OF CONTENTS Page 1. PRODUCT OVERVIEW ............................................................................................................ 1-1 1.1 Introduction ....................................................................
EO1 - 33029 4. ON LINE MODE ...................................................................................................................... 4 - 1 4.1 Operation Panel ..............................................................................
1. PRODUCT OVERVIEW EO1-33029 1.1 Introduction 1- 1 1. PRODUCT OVERVIEW 1.1 Introduction 1.2 Features 1.3 Unpacking Thank you for choosing the TEC B-852 series label/tag printer.
1. PRODUCT OVERVIEW EO1-33029 1.4 Accessories 1- 2 1.4 Accessories When unpacking the printer, please make sure all accessories are supplied with the printer. Owner’s Manual (1 copy) (Doc./No. EO1-33029) Print Head Cleaner (1 pc.) (P/No. 24089500013) Supply Holder Frame (L) (1 pc.
1. PRODUCT OVERVIEW EO1-33029 1.5 Appearance 1- 3 1.5 Appearance 1.5.1 Dimensions 1.5.2 Front View 1.5.3 Rear View The names of the parts or units introduced in this section are used in the following chapters. NOTE: D epth is 18.5 inches (470 mm) when the optional Cutter M odule is installed on the p rinter.
1. PRODUCT OVERVIEW EO1-33029 1.5 Appearance 1- 4 1.5.4 Operation Panel 1.5.5 Interior Please see Section 4.1 for further information about the Operation Panel.
2. PRINTER SETUP EO1-33029 2.1 Precautions 2- 1 2. PRINTER SETUP 2.1 Precautions This section outlines the procedures to setup your B-852 printer prior to its operation. The section includes precautions, connecting cables, assembling accessories, loading media and ribbon, inserting the optional memory card, and perform ing a test print.
2. PRINTER SETUP EO1-33029 2.2 Procedure before Operation 2- 2 2.2 Procedure before Operation This section describes the outline of the printer setup. 1. Unpack the accessories and printer from the box. 2. Refer to Safety Precautions in this manual and set up the printer at a proper location.
2. PRINTER SETUP EO1-33029 2.3 Assembling the Accessories 2- 3 2.3 Assembling the Accessories 2.3.1 Assembling the Supply Holder Frame The following procedure outlines the steps required to assemble the Supply Holder Frame and attach the frame to the B-852 printer in preparation for loading the media.
2. PRINTER SETUP EO1-33029 2.4 Connecting the Cables to Your Printer 2- 4 2.4 Connecting the Cables to Your Printer The following paragraphs outlines how to connect the cables from the B- 852 printer to your host computer, and will also show how to make cable connections to other devices such as the KB-80-QM keyboard, etc.
2. PRINTER SETUP EO1-33029 2.5 Connecting the Power Cord 2- 5 2.5 Connecting the Power Cord 1 . Make sure that the printer power switch is in the off position. 2. Connect the Power Cord to the printer as shown in the figure below. 3. Plug the other end of the Power Cord into a grounded outlet as shown in the figure below.
2. PRINTER SETUP EO1-33029 2.6 Turning the Printer ON/OFF 2- 6 2.6 Turning the Printer ON/OFF 2.6.1 Turning ON the Printer 2.6.2 Turning OFF the Printer When the printer is connected to your host computer it is good practice to turn the printer ON before turning on your host computer and turn OFF your host computer before turning off the printer.
2. PRINTER SETUP EO1-33029 2.7 Loading the Media 2- 7 2.7 Loading the Media 2.7.1 Installing the Media onto the Supply Holder Unit The following procedure will outline the steps required to install the media onto the Supply Holder Unit and adjust its position in the Supply Holder Frame at the rear of the B-852 printer.
2. PRINTER SETUP EO1-33029 2.7 Loading the Media 2- 8 2.7.1 Installing the Media onto the Supply Holder Unit (cont.) The diagram below, and the steps that follow, show the procedures for installing the Media onto the Supply Shaft and reassembling the Supply Holder Unit.
2. PRI NTER S ETU P EO1-33029 2.7 Loading the Media 2- 9 2.7.2 Installing the Supply Holder Unit onto the Supply Holder Frame 2.7.3 Loading Media into the Printer 1. Insert the assem bled Supply Holder U nit into the rear notches of the Supply Holder Fram e as shown in the diagram below.
2. PRINTER SETUP EO1-33029 2.7 Loading the Media 2-10 2.7.3 Loading Media into the Printer (Cont.) 2. Release the Print Head Block by pressing down on the Head Block Release Lever c as shown below. 3. Raise the Print Head Block to its fully open position as shown by the arrow d in the diagram below.
2. PRI NTER S ETU P EO1-33029 2.7 Loading the Media 2-11 2.7.3 Loading Media into the Printer (Cont.) 10. After loading the media, don’t forg et to move the Supply Holder Unit to the forward notches of the Supply Roll Frame as shown below.
2. PRINTER SETUP EO1-33029 2.8 Setting Sensor Positions 2-12 2.8 Setting Sensor Positions 2.8.1 Setting the Feed Gap Sensor 2.8.2 Setting the Black Mark Sensor After loading the media, as outlined in the previous paragraphs, it will then be necessary to set the Media Sensors used to detect the print start position for label or tag printing.
2. PRINTER SETUP EO1-33029 2.9 Loading the Ribbon 2-13 2.9 Loading the Ribbon 1. Raise the Top Cover and release and raise the Print Head Block as described in section 2.7.3, steps 1 and 2 . 2. Hold the Ribbon Supply Roll in your left hand and the Ribbon Take up Roll in your right hand.
2. PRINTER SETUP EO1-33029 2.10 Inserting the Optional PCMCIA Cards 2-14 2.10 Inserting the Optional PCMCIA Cards When the optional PCMCIA interface board is installed into the B-852 printer, there will be two PCMCIA slots available as shown in the figure below.
2. PRINTER SETUP EO1-33029 2.11 Test Print 2-15 2.11 Test Print The following test procedure allows you to perform a print test to verify that the printer is operating correctly. During the running of this test, the printer will first issue a blank page of media to allow the sensors to detect the Black Mark or Label Gap.
2. PRINTER SETUP EO1-33029 2.11 Test Print 2-16 2.11 Test Print (cont.) 8. Press the [PAUSE] key again and the printer will now print five labels of sample bar codes lines and the LCD Message Display will continue to display the following message.
2. PRINTER SETUP EO1-33029 2.11 Test Print 2-17 2.11 Test Print (cont.) Example of the slant line test print label Example of the bar code test print label Example of the character test print label NO.
3. PRINT ER OPER ATION EO1-33029 3.1 Overview 3- 1 3. PRINTER OPERA TION 3.1 Overv iew 3.2 Operating M odes This section provides a functional overv iew of how the printer receives print data from y our host computer and how it will operate in the various operating conditions.
3. PRINT ER OPER ATION EO1-33029 3.2 Operating Modes 3- 2 3.2 Operating M odes (Cont.) 2. Continuous ( or batch) mode – In this mode, the labels w ill be continuously printed and fed until the number of labels specified in the label issue com mand has been printed.
3. PRINT ER OPER ATION EO1-33029 3.3 Inst alling t he P rinter Drivers 3- 3 3.3 Installing the Printer Drivers 3.3.1 System R equirements 3.3.2 Driver Download The T EC MONO Printer Dr iver is a fil e.
3. PRINTER OPERATION EO1-33029 3.3 Installing the Printer Drivers 3- 4 3.3.2 Driver Download (Cont.) 2. In the previous screen, click on the Download button. The screen will change to the license agreement screen as shown below. 3. Read the license agreement and if you accept the terms of the agreement then click on the Accept button.
3. PRINTER OPERATION EO1-33029 3.3 Installing the Printer Drivers 3- 5 3.3.2 Driver Dow nload (Cont.) 3.3.3 Driver Installation 7. When you locate the file, such as Bdrv_Vx_x_Buildxx.exe, double click on the file to begin extracting the setup program files.
3. PRINT ER OPER ATION EO1-33029 3.3 Inst alling t he P rinter Drivers 3- 6 3.3.3 Driv er Installation (Cont.) 3. After the Install S hield temporary files have been loaded, the display will change to the Welcom e screen as shown below. 4. Click on the Next button to continue the installation.
3. PRINT ER OPER ATION EO1-33029 3.3 Inst alling t he P rinter Drivers 3- 7 3.3.3 Driver Installation (Cont.) 3.3.4 Add Print ers 7. Click on the Next button to accept the default Destination Folder (TEC_DRV MONO), or clic k on the Brow se button to select a different folder.
3. PRINT ER OPER ATION EO1-33029 3.3 Inst alling t he P rinter Drivers 3- 8 3.3.4 Add Print ers (Cont.) 3.3.5 Uninstalling the TEC B-852 Printer D river 4. After the TEC Printer Driver has been successfully loaded, the Printers screen should appear as shown below, showing the TEC B- 852 as being successfully installed.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3- 9 3.4 Using the B-852 Printer Properties Me nus This section will outline how to use the B- 852 Printer Properties menus to control the printing perform ance of the printer.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-10 3.4.1 Summary of Properties The B-852 Properties setting page has eleven tabs to select the different property setting m enus. Clicking on a tab will display the menu associated with that property allowing y ou to mak e changes to the operation of the printer.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-11 3.4.2 General Properties Tab This property will allow you to set up a comm ent, design ate a separator page, or print a test pag e.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-12 3.4.3 Details Tab This property will allow the necessary functions needed to select, add or delete a printer port,.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-13 3.4.3 Details Tab (Cont.) Select a Different P rinter Driver - Th e Print using the fol low ing driver: scrolling text box works w ith the New Dr iver.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-14 3.4.3 Details Tab (Cont.) Capture Additional Printer Ports - When clicking on the Capture Print er Port . button it will allow the capturing of a port (LP T1~LPT9) and mapping it to a network driv e.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-15 3.4.3 Details Tab (Cont.) 3.4.4 Regional Settings Tab Changing Port Settings - When clicking on the Port Set t i n.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-16 3.4.4 Regional Settings Tab (Cont.) Language Selection - By clicking on the arrow in the Language: scrolling text box, the following screen will appear to allow selection of the desired language to be used in the printer driver property screens.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-17 3.4.5 Page Setup Tab The Page Setup properties m anagem ent screen is the area in which to specify the label stock.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-18 3.4.5 Page Setup Tab (Cont.) By clicking on either the New button or the Edit button, the following screen display will appear.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-19 3.4.5 Page Setup Tab (Cont.) When the Negative check box has been checked, the print will be white on black. When this check box is unchecked, the print will be black on white.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-20 3.4.5 Page Setup Tab (Cont.) 3.4.6 Graphics Tab Enable Device Line Subst ituti on - Most applications draw lines as a graphic, rather than using line com m ands built-in to the printer.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-21 3.4.6 Graphics Tab (Cont.) 3.4.7 Bar Fonts Tab Dithering - Creating the illusion of different shades of gray by v arying the pattern of dots. Close observation rev eals that varying the patterns of black and white dots produces different shades of g ray.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-22 3.4.7 Bar Fonts Tab (Cont.) The above window has the following functions: • Bar Fonts View List . This window will display a list of all bar code fonts currently set up and their resolution they were created at in dots per inch (dpi).
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-23 3.4.7 Bar Fonts Tab (Cont.) Bar Code Options: • Symbology . Used to specify the sy mbolog y (bar code lang uage) for bar codes. • X dimensi on . Used to specify bar code density using the narrow bar "X-dim ension.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-24 3.4.7 Bar Fonts Tab (Cont.) 3.4.8 Stock Tab • Symbol Type . Used to specify the ty pe and lev el of error correction to use. (Used with Data Matrix only.) • Character Set .
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-25 3.4.8 Stock Tab (Cont.) Print Method - The following screen display shows what appears when the arrow of the Print Method: scrolling text box has been clicked on.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-26 3.4.8 Stock Tab (Cont.) Sensor Select • None . Used to specify that either continuous forms (labels without gaps) are being used or that, if there are g aps or mark s, they should be ignored.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-27 3.4.8 Stock Tab (Cont.) When a cutter is installed on the printer, the Cut option is used to enable the cutter operation and specify how often labels should be cut. The following setting s are available for the Cut option.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-28 3.4.9 Options Tab This page will allow selecting a g raphics transfer mode and to m ake adjustments to the print tone (lighter or dark er print). When selecting the Options tab, the following display screen will appear.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-29 3.4.9 Options Tab (Cont.) 3.4.10 Testing Tab Print Den sity Adjustment - Click ing on the Set: check box is necessary to enable the print density adjustment from this property page.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-30 3.4.10 Testing Tab (Cont.) Print Test Label button - Click ing on this button will print a test label to assist in troubleshooting printing problems. This should help v erify that the computer being used is communicating with the printer.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-31 3.4.10 Testing Tab (Cont.) Logging Opti ons - When the Logging Options button is clicked, the following display screen will appear. Logging - Supports log ging print jobs and recording printer code to files for debugg ing purposes.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-32 3.4.10 Testing Tab (Cont.) 3.4.11 A bout Tab • View Fil e button - View the currently selected print code file in a text editor • Send To Printer button - Sends the currently selected print code file to the printer, effectively printing the job again.
3. PRINT ER OPER ATION EO1-33029 3.4 Using t he B -852 Printer P roperties Menus 3-33 3.4.11 A bout Tab (Cont.) Clicking on the Version button in the initial screen will cause the following screen to appear. The screen will show the v ersion number of the driv er currently installed into the computer.
4. ON LINE MODE EO1-33029 4.1 Operation Panel 4- 1 4. ON LINE MODE 4.1 Operation Panel This chapter describes usage and purpose of the keys on the Operation Panel in On Line Mode. When the printer is in On Line Mode and connected to a host computer, normal operation of printing images on labels or tags can be accomplished.
4. ON LINE MODE EO1-33029 4.2 Operation 4- 2 4.2 Operation 4.3 Reset 4.4 Dump Mode When the printer is turned on, the “ ON LINE ” message appears on the LCD message display. It is shown during standby or normal printing. 1. The printer is turned on, standing by, or printing.
5. MAINTENANCE EO1-33029 5.1 Cleaning 5- 1 5. MAINTENANCE 5.1 Cleaning 5.1.1 Print Head/Platen/ Sensors This chapter describes how to perform normal m aintenance. To maintain the printer performance and quality print, please clean the printer regularly, or whenever media or ribbon is replaced.
5. MAINTENANCE EO1-33029 5.2 Care/Handling of the Media and Ribbon 5- 2 5.1.2 Covers and Panels 5.1.3 Optional Cutter Module 5.2 Care/Handling of the Media and Ribbon Wipe the Cover and Front Panel with a dry soft cloth. Wipe off dirt with a soft cloth slightly moistened with water.
6. TROUBLESHOOTI NG EO1-33029 6.1 Error Messages 6- 1 6. TROUBLESHOOTING This chapter lists the error messages, possible problems, and their solutions. 6.1 Error Messages Error Messages Problems/Causes Solutions HEAD OPEN The print head block is opened in Online Mode.
6. TROUBLESHOOTI NG EO1-33029 6.2 Possible Problems 6- 2 6.1 Error Messages (Cont.) Error Messages Problems/Cause Solutions NO PAPER **** 1. The m edia has run out. 2. The media is not loaded properly. 3. The media is slack. 1. Load new media. Then press the [RESTART] key.
6. TROUBLESHOOTI NG EO1-33029 6.3 Removing Jammed Media 6- 3 6.3 Removing Jammed Media This section describes in detail how to remove jamm ed media from the printer. Remove the jamm ed media from under the Upper Sensor Ass’y as follows: 1. Open the Top Cover.
6. TROUBLESHOOTING EO1-33029 6.4 Threshold Setting 6- 4 6.4 Threshold Setting To maintain a constant print position the printer uses the Transmissive Sensor to detect the gap between labels by measuring the amount of light passing through the media.
APPENDIX 1 SPECIFICATIONS EO1-33029 A1.1 Printer A1- 1 APPENDIX 1 SPECIFICATIONS Appendix 1 describes the printer specifications and supplies for use on the B-852 printer.
APPENDIX 1 SPECIFICATIONS EO1-33029 A1.2 Options A1- 2 A1.2 Options Option Name Type Description Source Cutter module B-7208-QM A stop and cut swing cutter. See NOTE. PCL5 interface board B-7708-PCL-QM This board enables the B-852 printer to support the HP-PCL5.
APPE NDIX 1 SP ECIFI CATIONS EO1-33029 A1.3 M edia A1- 3 A 1.3.1 Media Ty pe (Cont.) [Unit: mm] Label dispensing m ode It em Batch mode Cut mode Label: 38.0 Minimum media pitch 15.0 Tag: 25.4 Label length Min. 12.5 Min. 32.0 Width including back ing paper 100.
APPE NDIX 1 SP ECIFI CATIONS EO1-33029 A1.3 Media A1- 4 A 1.3.3 Detection A rea of the Reflect ive Sensor The reflective sensor is m ovable from the center to the left edge of m edia. The reflection factor of the black m ark m ust be 10% or lower with a waveform length of 950 nm.
APPE NDIX 1 SP ECIFI CATIONS EO1-33029 A1.4 Ribbon A1- 5 A 1 .4 Ri bbon Please mak e sure that the ribbon being used is approved by T OSHIBA TEC. The warranty does not apply to any problem caused by using non- approved ribbons. For information reg arding TOSHIB A TEC approved ribbon, please contact a sales representativ e.
APPENDIX 2 MESSAGES AND LEDS EO1-33029 APPENDIX 2 MESSAGES AND LEDS A2- 1 APPENDIX 2 MESSAGES AND LEDS Appendix 4 describes the LCD messages displayed on the operation panel. Symbols in the message 1: : The LED is illuminated. ~ : The LED is flashing.
APPENDIX 2 MESSAGES AND LEDS EO1-33029 APPENDIX 2 MESSAGES AND LEDS A2- 2 N OTES: • If a command error is found in the command received, 16 bytes of the command error, starting from the command code, will be displayed. (However, [L F] and [NUL] will not be displayed.
APPENDIX 3 INTERFACE EO1-33029 APPENDIX 3 INTERFACE A3-1 APPENDIX 3 INTERFACE Interface Cables To prevent radiation and reception of electrical noise, the interface cables must m eet the following requirements: • Fully shielded and fitted with metal or metallized connector housings.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.1 Operation Panel A4- 1 APPENDIX 4 SYSTEM MODE A4.1 Operation Panel Appendix 4 describes usage and purpose of the keys on the Operation Panel in System Mode.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.2 Overview A4- 2 A4.2 Overview System Mode consists of four main m enus: Self-Diagnostic Test, Printer Parameter Fine Adjustment, Test Print and PCL Em ulation Setting. While pressing the [FEED] and [PAUSE] keys at the same time, turn onon the printer.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.3 Self-Diagnostic Test A4- 3 A4.3 Self-Diagnostic Test The Self-Diagnostic Test contains the following sub menus: While pressing the [FEED] and [PAUSE] keys at the same time, turn on the printer. Hold both keys until the “<1>DIAG.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.3 Self-Diagnostic Test A4- 4 A4.3 Self-Diagnostic Test (Cont.) Self-Diagnostic Test and the result print out When the Maintenance Counter/Parameter Settings is printed, the message returns to “<1>DIAG. Vx.x”.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.4 Printer Parameter Fine Adjustment A4- 5 A4.4 Printer Parameter Fine Adjustment The Printer Parameter Fine Adjustment menu contains the following. !$'-8676(7 )(('$'-PP %$&.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.4 Printer Parameter Fine Adjustment A4- 6 A4.4 Printer Parameter Fine Adjustment (Cont.) While pressing the [FEED] and [PAUSE] keys at the same time, turn on the printer. Holder both key s until the “<1>DIAG.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.4 Printer Parameter Fine Adjustment A4- 7 A4.4 Printer Parameter Fine Adjustment (Cont.) Cut Position Fine Adjustment With this parameter you can fine adjust the cut position. When “<3>ADJUST SET” appears, press the [PAUSE] key twice.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.4 Printer Parameter Fine Adjustment A4- 8 A4.4 Printer Parameter Fine Adjustment (Cont.) Back Feed Length Fine Adjustment With this parameter you can fine adjust the Back Feed Length. When “<3>ADJUST SET” appears, press the [PAUSE] key 3 times.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.4 Printer Parameter Fine Adjustment A4- 9 A4.4 Printer Parameter Fine Adjustment (Cont.) X Axis Fine Adjustment With this parameter you can fine adjust the print position on X Axis. When “<3>ADJUST SET” appears, press the [PAUSE] key 4 times.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.4 Printer Parameter Fine Adjustment A4-10 A4.4 Printer Parameter Fine Adjustment (Cont.) Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct Print) With this parameter you can fine adjust the Print Tone.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.4 Printer Parameter Fine Adjustment A4-11 A4.4 Printer Parameter Fine Adjustment (Cont.) Ribbon Motor Voltage Fine Adjustment (Feed/Rewind Motor) With this parameter you can fine adjust the Ribbon Motor Voltage (Torque).
APPENDIX 4 SYSTEM MODE EO1-33029 A4.4 Printer Parameter Fine Adjustment A4-12 A4.4 Printer Parameter Fine Adjustment (Cont.) Threshold Manual Fine Adjustment (Black Mark/Feed Gap Sensor) With this parameter you can fine adjust the Threshold of the Black Mark and Feed Gap Sensors.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.5 Test Print A4-13 A4.5 Test Print The Test Print menu contains the following: [RESTART] [FEED] [RESTART] [FEED] [RESTART] [FEED] [RESTART] [FEED] [RESTART] [FEED] .
APPENDIX 4 SYSTEM MODE EO1-33029 A4.5 Test Print A4-14 A4.5 Test Print (Cont.) While pressing the [FEED] and [PAUSE] keys at the same time, turn on the printer. Hold both keys until the “<1>DIAG. Vx.x” Message appears. Press the [FEED] key 2 times.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.5 Test Print A4-15 A4.5 Test Print (Cont.) Print Speed Setting Select the print speed for the test print from 4 inches/second and 2 inches/second. After selecting the print speed, press the [PAUSE] key to go to Sensor Type Selection.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.5 Test Print A4-16 A4.5 Test Print (Cont.) Issue Mode Selection Select the issue mode for the test print by selecting between “[S]NO CUT” (Batch mode without cut) and “[C] WITH CUT” (Cut mode). After selecting the Issue Mode, press the [PAUSE] key to go to Label Length Setting.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.5 Test Print A4-17 A4.5 Test Print (Cont.) Test Print Pattern Selection When “<4>TEST PRINT” appears after paper feed selection, press the [PAUSE] key. Select a test print pattern from the following options.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.5 Test Print A4-18 A4.5 Test Print (Cont.) Characters While selecting the Characters, press the [PAUSE] key to start printing the characters. After printing is completed, the display returns to “<4>TEST PRINT”.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.6 PCL Emulation Setting A4-19 A4.5 Test Print (Cont.) A4.6 PCL Emulation Setting Auto Print While selecting the Auto Print, press the [PAUSE] key to feed one media and print slant lines (3 dots) on 5 pieces of media.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.6 PCL Emulation Setting A4-20 A4.6 PCL Emulation Setting (Cont.) Emulation ON/OFF Selection When “EMULATION OFF” is selected, press the [PAUSE] key to return to “<8>PCL EMULATION”. When “EMULATION ON” is selected, press the [PAUSE] key to proceed to the detailed setting menus.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.6 PCL Emulation Setting A4-21 A4.6 PCL Emulation Setting (Cont.) Issue Mode Selection With this parameter select the Issue Mode for the PCL Emulation. After selecting the issue mode, press the [PAUSE] key to show the Media Size Selection menu.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.6 PCL Emulation Setting A4-22 A4.6 PCL Emulation Setting (Cont.) Media Length Setting [FEED] key: Pressing the [FEED] key one time causes a –1 change, up to 110. [RESTART] key: Pressing the [RESTART] key one time causes a +1 change, up to 6400.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.7 Additional Information A4-23 A4.7 Additional Information A4.7.1 Self-Diagnostic Test Result Sample and Descriptions • Print Sample • Descriptions (1) Program ROM Check (Model Nam e, Date, Version, Part number, Checksum) PROGRAM B-850 01NOV2000 V1.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.7 Additional Information A4-24 A4.7.1 Self-Diagnostic Test Result Sample and Descriptions (Cont.) (3) Alphanumeric Font ROM Check FONT 5600 (4) Kanji ROM Check KANJ.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.7 Additional Information A4-25 A4.7.1 Self-Diagnostic Test Result Sample and Descriptions (Cont.) (8) Sensor 1 Check The status of the Cutter Home Position Sensor, Ribbon Feed Motor Sensor, and Ribbon Rewind Motor Sensor are printed.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.7 Additional Information A4-26 A4.7.1 Self-Diagnostic Test Result Sample and Descriptions (Cont.) (10) Expansion I/O Interface Check EXP.I/O OK (11) DIN Connector for the Key board (KB-80) Check KEY BRD OK Loopback test OK: The circuit has no problem.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.7 Additional Information A4-27 A4.7.2 Maintenance Counter/Parameter Check Print Sample and Descriptions • Print Sample TOTAL FEED 1.1Km FEED 1.1Km PRINT 0.5Km CUT 96 RIBBON 3H 232C ERR 255 SYSTEM ERR 0 POWER FAIL 0 [PC] [KEY] FEED +2.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.7 Additional Information A4-28 A4.7.2 Maintenance Counter/Parameter Check Print Sample and Descriptions (Cont.) • Descriptions of the Maintenance Counter No. Item Count Condition Range (1) Total media distance covered 0.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.7 Additional Information A4-29 A4.7.2 Maintenance Counter/Parameter Check Print Sample and Descriptions (Cont.) No. Item Contents Character PC-850 PC-851 PC-1252 LATIN9 PC-852 PC-855 PC-1253 Arabic PC-857 PC-1250 PC-1254 PC-8 PC-1251 PC-1257 (19) Font zero 0: No slash used.
APPENDIX 4 SYSTEM MODE EO1-33029 A4.7 Additional Information A4-30 A4.7.2 Maintenance Counter/Parameter Check Print Sample and Descriptions (Cont.) No. Item Contents (34) Printer IP address ***.***.***.*** (35) Gateway IP address ***.***.***.*** (36) Subnet mask ***.
APPENDIX 5 PRINT SAMPLES EO1-33029 APPENDIX 5 PRINT SAMPLES A5- 1 APPENDIX 5 PRINT SAMPLES Font.
APPENDIX 5 PRINT SAMPLES EO1-33029 APPENDIX 5 PRINT SAMPLES A5- 2 APPENDIX 5 PRINT SAMPLES (Cont.) Bar codes 0: JAN8, EAN8 1: MSI 2: Interleaved 2 of 5 3: CODE39 (Standard) 4: NW7 5: JAN13, EAN.
APPENDIX 5 PRINT SAMPLES EO1-33029 APPENDIX 5 PRINT SAMPLES A5- 3 APPENDIX 5 PRINT SAMPLES (Cont.) K: UPC-A L: UPC-A+2 digits M: UPC-A+5 digits N: UCC/EAN128 O: Industrial 2 of 5 P: PDF417 Q: Data Mat.
GLOSSARIES EO1-33029 GLOSSARIES GLOSSARIES Bar code A code which represents alphanumeric characters by using a series of black and white stripes in different widths. Bar codes are used in various industrial fields: Manufacturing, Hospitals, Libraries, Retail, Transportation, Warehousing, etc.
GLOSSARIES EO1-33029 GLOSSARIES Printer driver A software program that will convert the application program’s printing request into the language that the printer understands.
INDEX EO1-33029 INDEX INDEX B Backing paper A1-3 Bar code A1-1 Batch mode 3-2 Black mark A1-2 Black mark length A1-3 Black mark sensor 1-4, 2-12 ,5-1 C Centronics 1-3, 2-2 Cut mode 3-2 Cutter module 5.
INDEX EO1-33029 INDEX R Reflective sensor A1-4 Resolution A1-1 RESTART key 1-4, 4-1 Ribbon 2-13, 5-2, A1-5 Ribbon holder 1-4 Ribbon supply roll 2-13 Ribbon take up roll 2-13 Ribbon width A1-5 Rotation.
.
.
E PRINTED IN JAPAN EO1-33029C.
An important point after buying a device Toshiba B-850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba B-850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba B-850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba B-850 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba B-850 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba B-850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba B-850.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba B-850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba B-850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
