Instruction/ maintenance manual of the product 1202kit Toshiba
Go to page of 14
D VD-RAM DRIVE SD-W2002 Installation Instructions with V OB InstantWrite and CyberLink P owerD VD TM Software VERSION 3.0 J ANU AR Y 2002 TOSHIBA Storage Device Division.
i Limited W arranty T oshiba America Information Systems, Inc. Storage Device Division 9740 Irvine Boulevard, Irvine, California 92618 1-949-457-0777 What does my limited warranty cover? T oshiba America Information Systems, Inc.
Disclaimer and limitation of remedy ALL OTHER EXPRESS AND IMPLIED W ARRANTIES FOR THIS PRODUCT , INCLUDING THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P AR TICULAR PURPOSE AND/OR NONINFRINGEMENT OF THIRD P AR TY RIGHTS, ARE HEREBY DISCLAIMED.
T able of Contents Kit Packaging .............................................................................................. 1 System Requirement s .................................................................................. 1 Setting Jumpers .
Congratulations on your purchase of a T oshiba D VD-RAM dri ve and Kit. The following information will help you in the simple installation of your ne w D VD- RAM drive.
2 The following steps must be performed to pr operly install your D VD-RAM. ● Set dri ve’ s jumpers ● Connect audio cable ● Attach IDE BUS cable ● Connect power cable ● Mount D VD-RAM ● .
3 1. Remove computer cover and faceplate if required (refer to your computer system’ s man ual for remov al information). 2. If the D VD-RAM is replacing a CD-R OM, disconnect all connectors and re- mov e the CD-R OM presently installed in your system.
4 cable (side with red stripe) is connected to pin 1 on the drive. • If the D VD-RAM is the only drive connected on the secondary IDE BUS cable: connect drive to the last set of pins on IDE BUS cable. • If ther e is a device (i.e. CD-R OM) connected to the secondary IDE B US cable: connect D VD-RAM to the open middle connector .
5 COMPLETING INS T ALL A TION After you have connected all the necessary cables, push the D VD-RAM com- pletely into the computer’ s driv e slot. Mount the driv e per your computer’ s in- structions using the screws included in your kit. If you are using other screws, assure that the screw length does not exceed 3±0.
6 DVD-RAM FRONT PANEL The photo below illustr ates the following f eatures of the SD-W2002 DVD-RAM’ s front panel: Emer g enc y Eject Hole : The emergenc y eject hole is to be used only when the DV D tray will not open when the Load/Unload button is pressed.
7 OPER A TING THE DVD LOADING TR A Y T o open the D VD loading tray , just press the Load/Unload button. After inserting or removing a disc or recording cartridge, press the Load/Unload button again. Y ou must use a DVD-RAM recording cartridge when recor ding D VD-RAM media.
8 DVD CD D A T A CAP ACITY 2,048bytes/block mode 1: 2,048bytes/block mode 2: 2,336bytes/block R O T A TIONAL DVD-RAM (2.0): 1,380 - 3,300 CD-ROM, CD-R: 5,100 SPEED (RPM) 2, 100 - 3,300 CD-R W : 3,400 DVD-RAM (1.
9.
460020-C0 P/N 460020-C0.
An important point after buying a device Toshiba 1202kit (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba 1202kit yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba 1202kit - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba 1202kit you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba 1202kit will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba 1202kit, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba 1202kit.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba 1202kit. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba 1202kit along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
