Instruction/ maintenance manual of the product N-DR2000 Toro
Go to page of 20
H D D VIDEO NETWORK E R ROR RECORDER P O W E R N-DR2000 TM NETWORK VIDEO RECORDER N-DR2000 INSTRUCTION MANUAL Thank you for purchasing TOA's Network Video Recorder. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
2 T ABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................... 3 2. LIST OF INCLUDED COMPONENTS AND P ARTS ............................... 5 3. GENERAL DESCRIPTION ...........................
3 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
4 Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage. CAUTION When Installing the Unit • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock.
5 2. LIST OF INCLUDED COMPONENTS AND P ARTS Check to be sure that the following components and parts are contained in the package: Power supply cord (2 m) .................................................................................. 1 Network Video Recorder Instruction manual .
6 6. HANDLING PRECAUTIONS • The supplied power supply cord is designed for exclusive use with the Recorder. Never use it with other equipment. • It is recommended that the Recorder be always used in locations where the ambient temperature ranges from 0°C to +40°C and humidity levels of less than 80% to ensure that no condensation is formed.
7 (1) Power switch Press this switch to turn on the power. To turn off the power, press this switch again. After powering up : The system starts after about 1 minute. After powering down: The system shuts down after about 30 seconds (2) Message Indicator (Red) Flashes or illuminates to indicate the action of internal protection circuits.
8 Software Decoder N-SD2000 Network Combination Dome Camera N-CC2564 Network Color Camera N-CC2360 Network Video Receiver N-VR2010 Monitor Network Video T ransmitter Network Video T ransmitter N-VT201.
9 10. FUNCTIONS 10.1. Device Functions The device is equipped with the following functions. • Recording (Normal Recording, Pre-Alarm Recording, Alarm Recording, Scheduled Recording) • Search and p.
10 Recording priority level High Low Alarm Recording Pre-Alarm Recording Scheduled Recording Normal Recording Camera's recording mode Normal recording Alarm recording Normal recording Alarm occurs. Alarm ends. (Example) If an alarm occurs for a camera in Normal Recording mode.
11 HUB N-DR2000 View 1 : 1 – 4 View 2 : 1 View 3 : 1 View 4 : 1 View 5 : 1 PC1 PC2 PC4 PC3 PC5 (Example) PC 1 displays 4-split screen, while PCs 2 through 5 all display single-split screen each, reaching the maximum limit of 8 simultaneous connections.
12 10.4. Making Settings Using a Web Browser The N-DR2000 is equipped with its own Web server function. You can access this server via Web browser software in order to change the N-DR2000's status displays and various settings, and also to conduct maintenance.
13 Setting Manual (Chapter6) Reference Item Description Always record video and audio. Set the Normal recording mode. Make regularly scheduled recordings at pre-set times. By setting Scheduled recording, the recording occurs only at the specified times.
14 Audio recording: None ( * 1 ) Image size Picture quality Frame rate per camera 1 fps 2 fps 3 fps 5 fps High: D1 1 129 64 43 25 High: D1 3 186 93 62 37 High: D1 5 337 168 112 67 Medium: Half-D1 1 19.
15 Audio recording: 32 K Compression: OFF Loopback ( * 1 ) Image size Picture quality Frame rate per camera 1 fps 2 fps 3 fps 5 fps 1 4 63 42 71 9 3 5 24 03 32 4 5 6 05 04 43 5 1 5 24 13 42 5 3 5 74 7.
16 M5 x 12 binding head screw (supplied with the MB-23B) M5 fiber washer (supplied with the MB-23B) M4 x 12 binding head screw (supplied with the MB-23B) MB-23B (optional) N-DR2000 H D D VID E O N E T W O R K E R R O R RE C O R D E R P OW E R N - D R 2 0 0 0 13.
17 Possible Solution Check to make sure the power cord is plugged in to both the unit and the wall socket. The power indicator LED takes about 30 seconds to extinguish after the power switch is pressed. Wait 30 seconds or so to see if the light goes off.
18 Possible Solution Following a restart, an automatic disk check program will run automatically. Wait until this check is completed. If the lamp remains illuminated for more than 15 minutes, leave the power on and contact your nearest TOA dealer. Disconnect and reconnect the main AC power supply.
19 15. SPECIFICA TIONS 110 – 120 V AC, 50/60 Hz 57 W (0.8 A) HDD S-ATA 640 GB (320 GB x 2) 100BASE-TX/1000BASE-T, Auto-Nego: RJ45 connector TCP, UDP, SIP, RTP, HTTP, SMTP, ARP, DNS, NTP Settable 1, .
133-22-049-8A URL: http://www.toa.jp/ 220 – 240 V AC, 50/60 Hz 57 W (0.8 A) HDD S-ATA 640 GB (320 GB x 2) 100BASE-TX/1000BASE-T, Auto-Nego: RJ45 connector TCP, UDP, SIP, RTP, HTTP, SMTP, ARP, DNS, N.
An important point after buying a device Toro N-DR2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toro N-DR2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toro N-DR2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toro N-DR2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Toro N-DR2000 will certainly help you make a decision on the purchase.
If you already are a holder of Toro N-DR2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toro N-DR2000.
However, one of the most important roles played by the user manual is to help in solving problems with Toro N-DR2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toro N-DR2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
