Instruction/ maintenance manual of the product SF-450 Top Innovations
Go to page of 12
S team Fast Built for years of care - free use, Read These Ins tructions complete before use. MODEL SF - 450.
Steam. Model SF - 450 Fast Professional Style Steamer Thank yo u f o r purchasing th e Ste amFast Professional Style steamer. If tap water is being used, in order t o prolong t he life of your steamer, w e recommend that th e unit b e drained after each use.
INTRODUCTION Congratulations! Y o u are about t o use the simplest and most Versatile steamer brought to you, SteamFast, a trusted name in clothing care. Your n e w steamer provides clean, professional results every time! 1. Holds over 1/2 gallon of water - enough f o r approximately 30 minutes o f continuous operation.
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, always follow basic safety precautions, including t he following: 1. Read all instructions. 2. T o protect against risk of electrical shock, do not put appliance in water or other liquid.
LEARNING ABOUT YOUR STEAMER Please refer to the picture for each point (1) T h e control HANDLE on t h e end of the hos e sits just before the nozzle. The HANDLE is designed to b e heat free and is safe to grasp.
STEAMER ASSEMBLY STEP 1 - ATTACHING T H E METAL RO D Se t th e appliance o n a steady surface. The bottom metal rod is threaded on on e end. Screw the tw o larger metal rods together. Insert the bottom of the metal r od into t he holder o n the unit base and screw th e setscrew until tight.
STEAMER OPERATION STEP I - PREPARATION FOR U S E Se t the unit on the floor an d remove t h e water container. Check the inside of the container for sediment. Turn th e container upside down and push the valve open an d allow t o close two or three times to insure it is functioning smoothly.
PRESSING WITH STEAM 1. Grasp t h e control handle with t he nozzle facing upward. Beginning at the bottom o f the fabric will allow the steam to rise inside and outside removing wrinkles. Slowly move the nozzle from the bottom t o the top of th e fabric.
Accessories Fabric Brush Your steamer i s supplied with an accessory fabric brush which c an be used to gently brush the knap o f fabric such as corduroy. T o install simply snap into the appropriate slot in the nozzle when the steamer is of f and cool.
CLEANING AND STORING a . Turn th e ON / OFF switch to th e OFF position and unplug from t he power source. b. Wait for th e steamer to cool completel y for at least 30 minutes. c. Remove a nd drain the water container. Drain the unit b y removing the drain plug and allowing th e contents of the, reservoir t o drain.
TROUBL ES HOOTING T HE STEAMER PROBLEM CAUSE SOLUTION Steamer fails to heat Steamer no t plugged in Plug in to electrical outlet Auto shut of f engaged check water container is not empty.
Removi ng Mineral Buildup O ne common problem with steamers is mineral buildup caused by the high mineral c ontent i n many municipal water supplies. Mineral residue inside of the internal pipes an d heater can cause intermittent steaming or i n severe cases no steaming at all.
An important point after buying a device Top Innovations SF-450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Top Innovations SF-450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Top Innovations SF-450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Top Innovations SF-450 you will learn all the available features of the product, as well as information on its operation. The information that you get Top Innovations SF-450 will certainly help you make a decision on the purchase.
If you already are a holder of Top Innovations SF-450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Top Innovations SF-450.
However, one of the most important roles played by the user manual is to help in solving problems with Top Innovations SF-450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Top Innovations SF-450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
