Instruction/ maintenance manual of the product GO Live 1000 TomTom
Go to page of 80
TomTom GO.
What’s in the box 1. 2 What’s in the box •T o m T o m G O • Easy Click mount •U S B c a b l e • USB car charger / RDS-TMC Traf fic Receiver • Installation poster.
Read me first 2. 3 Read me first EasyClick mount Use the EasyClick mount to instal l your TomTom GO inside your car. Make sure that both the EasyClick mount and your windscreen are clean and dry before you attach the mount. Place the EasyClick mount so t hat it does not interfere with your view of the road or of a ny of the controls in your car.
4 Tip : We recommend using a broadband interne t connection whenever you connect your navigation device to MyTomTom. Setting up MyTomTom To set up MyTomTom, do the following: 1.
5 Important : You should plug the USB connector dire ctly into a USB port on your computer and not into a USB hub or USB port on a keyboard or monitor. Take care of your navigation device Never leave your TomTom GO or accessories on view when you leave t he car as they may become an easy target for thieves.
Safety 3. 6 Safety Positioning the EasyClick Mount Consider carefully where to attach the mount in your car. The mount should not bl ock or interfere with any of the following: • Your view of the ro.
Planning a route 4. 7 Plan- ning a route Important : In the interest of safety and to reduce distractions while you are dri ving, you should always plan a route before you start driving. To plan a route on your TomTom GO, do the following: 1. Tap the screen to open the Main menu.
8 5. Enter the streetname. • Streets with similar names are shown in the lis t while you type. • When the correct streetname appears in the list, tap the name to select the destina- tion. 6. Enter the house number, then tap Done . 7. The location is show n on the map.
9 8. Select the type of route you want to plan. 9. When the new route is shown, tap Done . • For more information about the route, tap Details . • To plan a different route, tap Change route . Your TomTom GO starts to guide you to yo ur destination, using s poken instructi ons and onscreen directions.
10 Frequent destinations If you often make trips to the same destinat ions, you can set your TomTom GO to ask if you want to plan a route to one of these loca tions, every time the device st arts. This is faster than planning a route in the normal way.
11 Your arrival time is constantly recalculated during your journey. The status bar shows whether y ou will a rrive on ti me or if yo u are goin g to be la te, as sh own below: Navigation menu options When you tap Navigate to... , you can set your destination in many ways, not just by ente r- ing the address.
12 Planning a route in advance You can use your TomTom GO to plan a route in advance, selecting your starting point and your destination. Here are some more reasons to plan a route in advance: • Find out how long a journey is going to take before you start.
13 7. Your TomTom GO plans the route between the two locations you sel ected. Viewing route information You can access these options for the route you last planned by tapping View route in the Main Menu or the Details button on the route summary screen.
Voice control 5. 14 Voice control About voice control Instead of tapping the screen to control your TomTom GO, you can use your voice to con- trol your GO.
15 If the command is incorrect, say, "No" an d repeat the command after you hear the tone. Your GO plans a route from your current location to your Home address. Tip : To stop your GO from listeni ng out for fu rther commands, say "Back" or "Cancel" or "Quit" or simply tap the screen.
16 Tip : Differe nt locations may have the s ame name, such as a road that spans multiple post- codes. When this happens you need to look at the screen and tap the correct location. If the street name you hear is incorrect, but the correct streetnam e is in the list, say the number next to the correct streetname or tap the st reetname in the list.
17 To enter the destination using your voice, tap one of the following buttons: Tips : • Your GO recognises places and streetnames when they are spoken in the local lan- guage using local pron unciation. • Spoken address entry is not possible for po stcodes which must be entered using the keyboard.
Driving View 6. 18 Driving View About the Driving View When your TomTom GO device starts for the first time , you are shown the Driving View along with detailed information about your current position. Tap the centre of the screen at any time to open the Main Menu.
19 10.Navigation instr uction for the road ahead and the distance to next instructi on. If the sec- ond instruction is less that 150m after the first in struction, you see it shown immediately instead of th e distance. Tap this part of the status bar to repeat th e last voice instruction and to change the vol- ume.
Advanced Lane Guidance 7. 20 Advanc ed Lane Guid- ance About lane guidance Note : Lane guidance is not available for all junctions or in all countries. Your TomTom GO helps you prepare for motorway exits and junctions by showing the correct driving lane for your planned route.
21 Tip : If no lane guidance is shown in the statu s bar and all lanes are highlighte d, you can use any lane..
Making changes to your route 8. 22 Mak- ing change s to your route About route changes After you plan a route, you may want to change the route or even the destination. There are various ways to change your route without the need to completely replan the ent ire journey.
23 Minimise del ays T ap this but ton to avoid traf fi c delays on a planned route. It is not always possible to avoid all traffic delays. Y our GO wil l check for traffic delays on y our route an d calculate the best route to avoid all or most of the delays.
View map 9. 24 View map About viewing the map You can view the map in the same way as you might look at a tradit ional paper map. The map shows your current location and many ot her locations such as Favourite s and POIs. To view the map in this way, tap View map or View route in the Main menu.
25 You can also set your own marker. Tap the cursor button, then tap Set marker position to place a g reen mark er at the cu rsor position . To turn markers off, tap Options , then Advanced and clear the Markers checkbox. 4. Options button 5. The cursor with streetname ball oon.
26 Position the cursor on a loca tion on the map, then tap Cursor and then tap one of the fol- lowing buttons: Navigate there T ap this button t o plan a route to the cursor position on the map. View location T ap this button t o view information about the location on the map such as the address.
Map corrections with TomTom Map Share™ 10. 27 Map correc- tions with TomTo m Map Share™ About TomTom Map Share TomTom Map Share helps you correct map errors and share map corrections with the rest of the TomTom Map Share community.
28 These corrections are investigated and ver ified by TomTom and are included when the next map version is released. Map correction settings You can decide which map correcti ons from the Map Share communi ty are used to cor- rect your maps. To select a category, tap Map corrections settings in the Map corrections menu.
29 Important : For safety reasons, do not enter the full details of a map correction while you are driving. Mark the location of the map err or instead an d enter the full detai ls later. Correcting a map error Types of map correction To make a correction to your map, tap Map corrections in the services menu, then tap Correct a map error .
30 (Un)block street T ap this button to block or unblock a street. Y ou can block or unblock the street in one or both directions. F or example, to correct a street near to your current location, do the fol- lowing: 1. Tap (Un)block street . 2. Tap Near you to select a street near your current location.
31 Edit street name T ap this button to change the name of a street on your map. F or example, to rename a street near to your current location: 1. Tap Edit street name. 2. Tap Near you . 3. Select the street or section of a stree t you want to correct by tapping it on the map.
32 Edit POI T ap this button to edit an existing POI. Y ou can use this button to make the followi ng changes to a POI: • Delete the POI. • Rename the POI. • Change the telephone number of the POI. • Change the category that a POI belongs to. • Move the POI on the map.
33 Other T ap this button to report other types of corrections. These corrections are not immediately appli ed to your map. Y our T omT om GO sends a special report to T omT om Map Share. Y ou can report missing streets, errors in motorway entrances and exits and missing roundabouts.
Sounds and voices 11. 34 Sounds and voices About sounds and voice s Your TomTom GO uses sound for the following: • Driving directions and other route instructi ons • Traffic information • Warnin.
35 Tap the central panel on the status bar and move the slider to adjust the volume. The last route instruction is played so you can hear the new volume level. • In the Settings menu. Tap Settings in the Main menu, then tap Volume settings and move the slider to adjust the volume.
Settings 12. 36 Set- tings About settings You can change the way your TomTom GO looks and behaves. Most of the settings on your device can be accessed by tapping Settings in the Mai n Menu.
37 Phone settings Status & Information Manage Favourites Phone settings T ap this button to open the phone settings menu. F or more information on connecting your phone and making hands-free calls, see Hands-Free calling .
38 Make your own menu Voices Volume settings Speaker settings Start-up settings Make your own menu T ap this button to add up to six buttons to your own personalised menu. If there are only one or two buttons in your menu, both buttons are shown in the Driving view .
39 Set clock MyTomTom account Manage POIs Set clock T ap this button to select the time format. As soon as you have a GPS fix, the time will be set automatical ly . If you don ’t have a GPS fix, you can choose to set the time manually . MyTomTom account T ap this button to log in to your T omT om account.
40 Show POI on map Change Home location Switch map Show POI on map T ap this button to select the types of P oint of Interest (POI) you want to see on the map. 1. Tap Show POI on map in the Settings menu. 2. Select the POI categories you want to be shown on the map.
41 Planning settings Safety settings Change car symbol Planning settings T ap this button to set the way your T omT om GO calculates the routes that you plan. Set the type of route you want your GO to calculate. Ta p IQ R outes to set if you want the device to use IQ Routes information to help find the best route.
42 2D/3D settings Status bar settings Change map colours 2D/3D settings T ap this button to set the default vi ew of the map. T o switch between 2D and 3D views while driving , tap the centre part of the status bar in Driving View .
43 Brightness settings Keyboard settings Change language Set units Operate left-handed / Operate right handed Battery saving settings Brightness settings T ap this button to set the brightness of the screen. Move the sliders to adjust the brightness level.
44 Advanced setting s Reset factory settings Advanced settings T ap this button to select the following advanced settings: • Show house number before street name - when this setting is selected, addresses are shown with the hous e number followed by the streetname, such as 10 Downing street .
Points of Interest 13. 45 Points of Inter- est About Points of Interest Points of Interest or POIs are useful places on the map. Here are some examples: • Restaurants •H o t e l s •M u s e u m s.
46 Home T ap this button to set your Home location as a POI. This is useful if you decide to change your Home locati on, but first want to create a POI using the current Home address.
47 The POI is created and saved in the selected category. Using POIs to plan a route When you plan a route, you can use a POI for the destination. The following example shows how to plan a route to a car park in a city: 1. Tap Navigate to... in the Main menu.
48 Calling a POI Many of the POIs on your TomTom GO include phone numbers. This means you can use your GO to call the POI and plan a route to the location of the POI. For example, you can search for a restaurant that serves South-East Asian cuisine, call to reserve a table and plan a route to the restaur ant, and all using your GO.
49 You can set your GO to let you know when you are near to selected POI locations. In this way, you could for example, set the device to let you know you when you are approaching a petrol station. You can create your own POI categories and add your own POI locations to these catego- ries.
Help 14. 50 Help About getting help Tap Help in the Main Menu to navigate to emergency services centres and other specialist services and contact them by phone. For example, if you are invol ved in a car acci dent, you c ould use the He lp menu to call the nearest hospital and tell them your exact locati on.
51 Drive to help T ap this button to navigate your way by car to a service centre. Walk to help T ap this button to navigate your way on foot to a service centre.
Hands-free calling 15. 52 Hands- free calling About hands-free calls Important : Not all phones are supported or compatible with all features. For more infor- mation, go to tomtom.com/phones/compatibility . If you have a mobile phone with Bluetoot h®, you can use your TomTom GO to make phone calls and se nd and recei ve messages.
53 •T a p Phonebook entry to select a contact from your phonebook. Note : Your phonebook is automatically copied to your GO when you first establish a con- nection with your mobile phone. Not all phones can transfer the phonebook to your GO. For more information, go to www.
54 Auto-answer settings T ap this button to change the auto -answer settings. Change Home number T ap this button to change your Home phone number . Disable Bluetooth T ap this b utton to disable Bluetooth on your T omT om GO. Delete T ap this button to select information you want to delete.
Favourites 16. 55 Favour- ites About Favourites Favourites provide an easy way to select a location without the need to enter the address. They do not need to be favourite places, they can simply be seen as a collection of useful addresses. Creating a Favourite To create a Favourite, do the following: 1.
56 6. Your GO suggests a name for your new Favo urite. To enter a new name, there is no need to delete the suggested name, you just start typing. Tip: It is a good idea to give your Favo urite a name that is easy to remember. 7. Tap OK . Your new favourite appears in the list.
57 Tip: Use the left and right arrows to choose another Favourite from your li st. Your GO calcul ates the route for you. 6. When the ro ute is calculat ed, tap Done . Your GO will immediately start guiding you to your desti nation with spoken instructions and visual instructions on the screen.
Traffic information 17. 58 Traffic infor- mation Introducing traffic information You can receive traffic information in two ways: • TomTom Traffic • Traffic M essage Cha nnel (RDS -TMC) Using traffic information, your TomTom GO ca n automatically adjust your route to mini- mise any delays.
59 Important : The RDS-TMC receiver does not wor k if the Car Charger is not connected. The traffic sidebar is shown on the right side of the Drivi ng view. The sidebar informs you about traffic delays while you drive, using glowing dots to show you where each traffic incident is located on your route.
60 Setting the radio frequenc y for RDS-TMC information Note : Not all devices support se tting the radio frequency. If you know the frequency of a particular radi o station you want to use for RDS-TMC traffic information, you can set the frequency manually.
61 The first time you use Home to work , you must set your traffic home and work locations. You can now use the Home to work and Work to home buttons. Note: The home location you set here is not th e same as the home location you can set in the Settings Menu .
62 Tap the left and right arrow buttons to move through each inciden t in turn, viewing the details of each one. This include s the type of incident, for example road works, and the length of delay caused by this incident.
63 3. To hear a beep sound when a new traffic incident occurs on your route, select Report if traffic on route changes and then tap Done . 4. Tune manually by entering a freq uency - if you select this option, t he button Tune man- ually is shown in the Traffic menu.
64 Traffic menu To open the Traffic menu, tap the Traffic sidebar in the Driving View or tap Traffic in the Services menu. The following buttons ar e availabl e: Minimise traffic delays Tap this button to re-plan your route ba sed on the latest traffic information.
Speed Cameras 18. 65 Speed Cam- eras About Speed Cameras The Speed Cameras service warns you a bout the following roadside camera locations: • Speed camera locations. • Accident blackspot locatio ns. • Mobile speed camera locations. • Average speed camera locations.
66 Tip: To change the number of seconds or warning sound, tap Alert settings in the Sp eed Cameras menu. Changing the way you are warned Speed Camera Symbols Speed cameras are shown as symbols on the Driving View. When you approach an area where an alert is located, you se e a symbol and a warning sound is played.
67 Report butto n To show the report button in the Driving View, do the following: 1. Tap Services in the Main Menu. 2. Tap Speed Cameras . 3. Tap Enable report button .
68 Note: If the type of camera you choose has a speed restriction, you can also enter the speed. A message confirms that your camera has been reported to the Speed Came ra team at TomTom. Reporting a new speed camera while at home You do not need to be at the location of a speed camera to report the new location.
69 Average speed check camera warnings There are several types of visual and audibl e warnings that you may see and hear when you meet an average speed check camera. You always receive a start and e nd zone warn in g regardless of the spe ed you are travelling at.
70 Speed Cameras menu To open the Speed Cameras menu, tap Services in the Main Menu and then tap Speed Cameras . Intermediate warning - type 3 Once in the speed check zone, if you are driving at over .
MyTomTom 19. 71 MyTo mTom About MyTomTom MyTomTom helps you manage the contents and services of your TomTom GO navigation device, as well as giving y ou access to th e TomTom community.
72 Tip: When you connect your navigation device to you r computer, MyTomTom tells you if there are any updates for yo ur device. MyTomTom account To download content and services from To mTom, you need a MyTomTom account. You can create an account when you start using MyTomTom.
Customer support 20. 73 Cus- tomer sup- port Getting help to use your navigation device To find out even more about your navigati on device, use MyTomTom to read the Refer- ence Guide or download it from tomtom.com/downloads . You can also find online help at tomtom.
Addendum 21. 74 Adden- dum Important Safety Notices and Warnings Global Positioning System The Global Positioning System (GPS) is a satelli te-based system that provides location and timing information around the globe.
75 or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fl uids, rinse thoroughly with water and seek medical attentio n immediately.
76 Connected networks Devices that contain a GSM module are intende d for connection to the following net- works: GSM/GPRS 900/1800/1900 Exposure limits This device complies with radiation exposure limits set forth for an uncontrolled environ- ment.
Copyright notices 22. 77 Copy- right notices © 2010 TomTom N.V., The Netherlands. TomTom ®, and the "two hands" logo, among oth- ers, are Trademarks owned by TomTom N.V. or one of its subsidiaries. Please see www.tomtom.com/legal for warranties and end user licence agreements applying to this product.
78 a www.tomtom.com/legal para consultar as garantias e o contratos de licença do utili- zador final aplicáveis a este produto. © 2010 TomTom NV, Holland. TomTom™ og logoet med "de to hæ nder" er blandt de var- emærker, produkter og registrerede varemærk er, der tilhører TomTom International B.
79 produktui taikomas garantijas ir licencijavimo galutiniam vartotojui sutartis skaitykite internete adresu www.tomtom.com/legal . © 2010 TomTom N.V., N ī derlande. TomTom® un “divu roci ņ u” logotips ir pre č z ī mes, kas pieder TomTom N.V.
80 Supply of this product does no t convey a license nor imply an y right to distribute cont ent created with this product in revenue-generat ing broadcast systems (terrestrial, satellite, cable and/o.
An important point after buying a device TomTom GO Live 1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TomTom GO Live 1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TomTom GO Live 1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TomTom GO Live 1000 you will learn all the available features of the product, as well as information on its operation. The information that you get TomTom GO Live 1000 will certainly help you make a decision on the purchase.
If you already are a holder of TomTom GO Live 1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TomTom GO Live 1000.
However, one of the most important roles played by the user manual is to help in solving problems with TomTom GO Live 1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TomTom GO Live 1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
