Instruction/ maintenance manual of the product SBK-30R BEA
Go to page of 2
3 Installation SBK-30 USER’S GUIDE 1 Description 75.5179.05 20080415 Page 1 of 2 The SBK-30 (10.1029) is a self-contained infrared beam set that may be used for various applications, most commonly automatic pedestrian doors. The beams fi t easily into a pre-drilled ½” hole and are a snap fi t.
6 T roubleshooting 5 Power ON Page 2 of 2 75.5179.05 20080415 Upon powering, observe the back of the beams for LED indications. There should be a green LED illuminated at the back-side of the Emitter and the Receiver to indicate power ON. The Receiver should also have an orange LED illuminated when the beam is aligned and unobstructed.
An important point after buying a device BEA SBK-30R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BEA SBK-30R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BEA SBK-30R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BEA SBK-30R you will learn all the available features of the product, as well as information on its operation. The information that you get BEA SBK-30R will certainly help you make a decision on the purchase.
If you already are a holder of BEA SBK-30R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BEA SBK-30R.
However, one of the most important roles played by the user manual is to help in solving problems with BEA SBK-30R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BEA SBK-30R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
