Instruction/ maintenance manual of the product HS-1200BT Toa
Go to page of 8
OPERA TING INSTRUCTIONS SPEAKER SYSTEMS 1. SAFETY PRECAUTIONS ........................... 2 2. GENERAL DESCRIPTION ......................... 3 3. FEATURES ................................................. 3 4. DIMENSIONAL DIAGRAM .....................
2 When Installing the Unit • Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface. Doing so may result in the unit falling down and causing personal injury and/or property damage.
3 When the Unit is in Use • Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage. • Make sure that the volume control is set to minimum position before power is switched on.
4 5. INPUT TERMINAL SECTION • As the Speakon connector is internally connected in parallel to the screw terminal as shown below, you can use either of the two. • The usable connector (on the cable end) that matches the NEUTRIK NL4MP Speakon is NEUTRIK NL4FX Speakon.
5 8. INST ALLA TION 8.1. Installing to a Ceiling or W all Install the speaker system to a ceiling or wall using the optional mounting brackets shown below. Note Refer to the instruction manual enclosed with the HY-1200 series or HY-1500 series Mounting Bracket for its mounting details.
6 8.1.4. HY-W0801 and HY-W0801W Wall Mount Brackets (For wall installation, horizontal angle adjustable) Installing the HS series speaker to a wall in conjunction with the HY-1200 series or HY-1500 series Mounting Bracket permits the speaker's horizontal angle to be adjusted.
7 8.3. Using as a Floor Monitor Notes • When installing the speaker system on slippery floor, put a non-slip mat under the speaker. • Do not kick or stand on the speaker system, as this will damage the speaker. The figure shows the HS-1200 series.
533-06-176-1A URL: http://www.toa.jp/ 10. SPECIFICA TIONS Note: The design and specifications are subject to change without notice for improvement. • Accessories Handle ................................................................................
An important point after buying a device Toa HS-1200BT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toa HS-1200BT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toa HS-1200BT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toa HS-1200BT you will learn all the available features of the product, as well as information on its operation. The information that you get Toa HS-1200BT will certainly help you make a decision on the purchase.
If you already are a holder of Toa HS-1200BT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toa HS-1200BT.
However, one of the most important roles played by the user manual is to help in solving problems with Toa HS-1200BT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toa HS-1200BT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
