Instruction/ maintenance manual of the product WM-4210 TOA Electronics
Go to page of 4
Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference.
2. GENERAL DESCRIPTION The WM-4210 Wireless Microphone employs a dynamic microphone element and is suitable for vocal applications. The WM-4220 Wireless Microphone employs an electret condenser microphone element and is suitable for speech applications.
6. B A TTER Y INSERTION Step 1. Hold the microphone body and rotate the microphone grip counterclockwise to remove it. Step 2. Insert the battery 6LR61 (Alkaline 9 V) according to the instructions attached to the inside of the battery compartment. Pay attention to the correct polarity when inserting the battery.
Model No. WM-4210 WM-4220 Microphone Element Dynamic type Electret condenser type Cardioid pattern Cardioid pattern Emission F3E Frequency Range 690 – 865 MHz, UHF Selectable Channel 16 channels RF Carrier Power Less than 50 mW Tone Frequency 32.
An important point after buying a device TOA Electronics WM-4210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics WM-4210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics WM-4210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics WM-4210 you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics WM-4210 will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics WM-4210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics WM-4210.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics WM-4210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics WM-4210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
