Instruction/ maintenance manual of the product SFX5.1 TOA Electronics
Go to page of 8
The setup guide PO WERED SUBW O OFER SFX 5.1 Sub manual AW.qxd:Layout 1 25/9/07 15:05 Page 1.
Thank you for purchasing this high performance 5.1 home theatre system. The SFX5.1 has been built and tested with care and precision, to provide first class performance and reliable operation. T o ensure maximum benefit from ownership and for reasons of safety , please read the following information before using for the first time.
W arning: T o reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on the apparatus. T o completely isolate this apparatus from the mains, disconnect the power supply plug from the receptacle.
W arning: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage. W arning: T o reduce the risk of fire or electric shock, do not expose this apparatus to rain, liquids, moisture, excessive heat, or naked flame.
Subwoofer Connection - USING LINE LEVEL INPUT TO AMPLIFIER SUB OUTPUT + + - - AMPLIFIER R O AMPLIFIER L OU TO AMPLIFIER SUB OUTPUT + + - - AMPLIFIER L OUTPUT AMPLIFIER R OUTPUT Subwoofer Connection - USING HIGH LEVEL INPUTS SFX 5.
The SFX5.1 system subwoofer may be connected in any one of the following ways: Line levels • Using the subwoofer output on your A/V receiver or decoder connect a single RCA interconnect to either the left or right line input on the subwoofer rear panel.
Setting up Ensure the POWER switch is in the OFF position. Y ou can operate the SFX subwoofer in two modes, AUTO and ON. Set to AUTO, the unit remains switched off until a signal is present (power saving), set to ON the unit runs continuously . Connect the SFX subwoofer to a convenient mains socket using the lead and plug supplied.
Subwoofer PERFORMANCE Power output Frequency response (-6dB) Driver Inputs Power requirements Fuse ratings Additional features Weight Dimensions H x W x D Finish 100 W atts 45Hz - 140Hz 200mm (8.00”) paper cone T win line or speaker level 160V A max AC100-120V / 60Hz - Fuse: T1.
An important point after buying a device TOA Electronics SFX5.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics SFX5.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics SFX5.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics SFX5.1 you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics SFX5.1 will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics SFX5.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics SFX5.1.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics SFX5.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics SFX5.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
