Instruction/ maintenance manual of the product P-9060DH TOA Electronics
Go to page of 16
OPERA TING INSTRUCTIONS 9000 SERIES AMPLIFIERS P-9060DH P-9120DH Thank you for purchasing TOA's 9000 series Amplifier. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. T ABLE OF CONTENTS ON OFF 0 10 PROTECT PEAK SIGNAL CH 1 0 10 PROTECT PEAK SIGNAL CH 2 POWER 1.
2 1. IMPORT ANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings.
3 2. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety.
4 When Installing the Unit • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock. • When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord itself. Operating the unit with a damaged power supply cord may cause a fire or electric shock.
5 3. GENERAL DESCRIPTION TOA’s P-9060DH Power Amplifier is a 2-channel amplifier providing 60 W per channel at 83 Ω (70 V line output). TOA’s P-9120DH Power Amplifier is also a 2-channel amplifier providing 120 W per channel at 41 Ω (70 V line output).
6 ON OFF 0 10 PROTECT PEAK SIGNAL CH 1 0 10 PROTECT PEAK SIGNAL CH 2 POWER 1 2 3 4 5 3 4 5 6 7. NOMENCLA TURE AND FUNCTIONS [Front] 1. Power switch [ ON, OFF] Power is switched on and off with each depression of this switch. 2. Power indicator [POWER] Lights blue when the Power switch (1) is turned on.
7 SPEAKER OUT CH 2 CH 1 CH 2 INPUT HOT COLD EARTH CH 1 INPUT HOT COLD EARTH OFF CH 1 TO ALL ON –20 dB 0 dB INPUT LEVEL –20 dB 0 dB INPUT LEVEL 7 8 9 10 10 11 11 12 [Rear] 7. AC inlet Connect the supplied power cord to this inlet. 8. Functional earth terminal Hum noise may be generated when external equipment is connected to the unit.
8 8.1. Speaker Output T erminal Connections The speaker output terminal is designed for 70 V line applications. Both CH 1 and CH 2 outputs are provided on the 4-pin screw terminal. Connect the speaker cables to each positive terminal (+) and negative terminal (–) individually.
9 8.2. Input T erminal Connections Electronically-balanced inputs of 3-pin removable terminal block type. When connecting the units’ inputs in parallel, connect each removable terminal plug using a daisy chain wiring. Up to 10 units can be connected to the PRE AMP OUT terminal for each channel of the M-9000, A-9000, or T-001T.
10 8.3. Removable T erminal Plug Connection Be sure to use the supplied removable terminal plugs for connections to the removable terminal blocks. Cautions • Be sure to use shielded cables for audio signal lines.
11 Use the supplied rack mounting bracket when mounting the unit in a standard 19" equipment rack (2 unit size). Step 1. Remove four M4 x 8 screws on the sides. The removed screws are no longer used. Step 2. Attach the rack mounting bracket to the unit using the supplied four M4 x 16 bracket mounting screws.
12 10. OPERA TION After all connections are made, turn power switch ON, and the Power Indicator lights. The amplifier comes into operation about 5 seconds after the power is turned on. 1 1. VOLUME ADJUSTMENT Obtain desired output level by adjusting the individual input volume controls.
13 14. BLOCK DIAGRAM VI Limiter Offset Detector Output Level Sensor Protection Circuit Power Supply for Power Amp. Unit FAN Control Heat Sink Temperature Sensor Mute Control Power Supply for Preamplifier H C CH 1 10 kΩ E GAIN Electronically balanced VOLUME CH 1 Power Amp.
14 15. DIMENSIONAL DIAGRAM Unit: mm (inches) ON OFF 0 10 PROTECT PEAK SIGNAL CH 1 0 10 PROTECT PEAK SIGNAL CH 2 POWER 482 (18.98) 4-7 x 10.5 (4-0.28 x 0.
15 * 0 dB = 1 V Note: The design and specifications are subject to change without notice for improvement. Power cord (2 m or 6.56 ft) .................................................. 1 Rack mounting bracket ..........................................
133-22-168-4A URL: http://www.toa.jp/ * 0 dB = 1 V Note: The design and specifications are subject to change without notice for improvement. Power cord (2 m or 6.56 ft) .................................................. 1 Rack mounting bracket .......
An important point after buying a device TOA Electronics P-9060DH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics P-9060DH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics P-9060DH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics P-9060DH you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics P-9060DH will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics P-9060DH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics P-9060DH.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics P-9060DH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics P-9060DH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
