Instruction/ maintenance manual of the product IWSA500-D TOA Electronics
Go to page of 10
OWNER’S MANUAL iwsa500-D Amplifier iwsa500-D 0 180 C R O S S OV E R F R E Q U E N C Y 5 0 1 5 0 CROSSOVER FREQUENCY PHASE BYP ASS CROSSOVER ON AUTO.
2 T ANNOY iwsa500-D 2.0 W ARNINGS Before using your amplifier , be sure to carefully read the applicable items of these operating instructions and the safety suggestions. • Read these instructions. • Keep these instructions. • Heed all warnings.
3 Thank you for selecting T annoy developed by our dedicated team of design engineers, they are the choice of discriminating music and movie lovers the world over .
4 3.0 APPROV ALS This equipment is tested and approved according to the Canadian Standards Association (CSA/C/US) and Federal Communications Commission (FCC). 2.4 USER RESPONSIBILITY 2.4.1 Speaker Damage Y our amplifier is very powerful and can be potentially dangerous to both, loudspeakers and humans alike.
5 T ANNOY iwsa500-D iwsa500-D 4.0 INTRODUCTION 4.1 Unpacking Thank you for purchasing a T annoy power amplifier . This manual contains important information on operating your amplifier correctly and safely . Please take some time and read this manual to familiarize yourself with the advanced features of this amplifier .
6 T ANNOY iwsa500-D 4.3 Rear Panel Figure 2: Rear Panel OUTPUT 1 LINE IN LINE OUT OFF ON 5A 120V~60HZ T5AL 250V CAUTION: FOR CONTINUED PR O TECTION AG AINST RISK OF FIRE, REP LACE ONL Y WITH SAME TYPE FUSE AND RATING . ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE ET CALIBRE.
7 T ANNOY iwsa500-D 6.3 Cable Choice Always use the best quality of cable available within your budget. High quality audio signals passing from the amplifier to the loudspeaker are unusual in their demands on the cable.
8 T ANNOY iwsa500-D 8.0 PROTECTION FEA TURES The limiter function is included to prevent dangerous clipped signals reaching the speaker and damaging it. If an amplifier is severely overdriven, its output waveform is clipped (its peaks are squared off) - reducing the crest factor .
9 12.0 TECHNICAL SPECIFICA TIONS AND DRA WINGS PERFORMANCE Maximum Output Power (1) (2) Minimum Nominal Load Impedance Distortion Minimum Frequency Bandwidth Input Impedance Current Draw at 4 Ω FRON.
T annoy United Kingdom T : +44 (0) 1236 420199 F: +44 (0) 1236 428230 E: enquiries@tannoy .com T annoy North America T : (519) 745 1 158 F: (519) 745 2364 E: inquiries@tannoyna.
An important point after buying a device TOA Electronics IWSA500-D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics IWSA500-D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics IWSA500-D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics IWSA500-D you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics IWSA500-D will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics IWSA500-D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics IWSA500-D.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics IWSA500-D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics IWSA500-D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
