Instruction/ maintenance manual of the product I6 AW TOA Electronics
Go to page of 12
i6 AW & i6T AW USER MANUAL.
CONTENTS 1. Introduction 2. Unpacking 3. Connectors/Cabling 4. Polarity Checking 5. Amplification & Power Handling 6. Power Selection 7. Equalisation 8. Dimensions 9. Hardware 10. Performance Data 11. Technical Specifications 12. Troubleshooting Guide 13.
1. Introduction Designed for a wide variety of sound reinforcement applications the Tannoy i6 A W (All Weather) is an ultra compact loudspeaker system capable of delivering high sound pressure levels with extremely low distortion, resulting in outstanding clarity, definition and detail.
CABLE RUN (m) C.S.A. OF EACH CONDUCTOR (mm) CABLE RESISTANCE Ω Ω % POWER LOSS INTO 8 Ω Ω LOAD % POWER LOSS INTO 4 Ω Ω LOAD 10 2.5 4.0 6.0 0.14 0.09 0.06 1.7 1.1 0.73 3.5 2.2 1.5 25 2.5 4.0 6.0 0.35 0.22 0.14 4.3 2.7 1.8 8.6 5.4 3.6 50 2.5 4.
6. Power Selection (i6T AW) Determine the maximum power in watts needed at each speaker location. The i6 A W transformer can be tapped at 30w, 15w, 7.5w, & 3.
9. Hardware The i6A W can be wall or ceiling mounted using the MB6 (optional) bracket ( fig 1. ) which is designed to offer the maximum flexibility in selecting the desired angles. The MB6 is supplied with M8 bolts for fixing to the loudspeaker ( fig1.
10. Performance Data Anechoic Frequency Response, 1watt @ 1m Impedance.
---- Hororizontal ___ Vertical 500Hz 1k 2k 4k 8k 16k.
11. Technical Specifications Frequency response (1) +/- 3dB 70Hz - 20kHz Recommended Amplifier Power up to 180 watt / 8 ohm Power Handling Average(2) Programme Peak (10ms) 90 watt 180 watt 360 watt Sensitivity (1) 2.
12. Troubleshooting Guide Symptom Possible Cause Action No Output From Speakers Broken Speaker Cables(s) Amplifier Check the electrical continuity of the loudspeaker cables, and replace if necessary. Check the gain controls on the amplifier are turned up.
13. I6 AW Service Parts & Accessories Part Number Description 7900 0411 Driver Kit 7900 0412 Recone Kit 7900 0725 HF Diaphragm Kit 7300 0684 Crossover Kit - 12 82 8000 0920 Yoke Bracket 14. Warranty No maintenance of the i6 A W loudspeaker is necessary.
Declaration of Conformity The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment.
An important point after buying a device TOA Electronics I6 AW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics I6 AW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics I6 AW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics I6 AW you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics I6 AW will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics I6 AW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics I6 AW.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics I6 AW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics I6 AW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
