Instruction/ maintenance manual of the product BG-1030 TOA Electronics
Go to page of 16
OPERA TING INSTR UCTIONS MIXER PO WER AMPLIFIER BG-1015 BG-1030 BG-1060 BG-1120 Please follow the instructions in this manual to obtain the optimum results from this unit.
SAFETY PRECA UTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
3 • Be sure to replace the unit's terminal cover after connection completion. Because high voltage is applied to the speaker terminals, never touch these terminals to avoid electric shock. • Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.
4 T ABLE OF CONTENTS 1. GENERAL DESCRIPTION ............................................................................. 5 2. FEA TURES .......................................................................................................... 5 3. NOMENCLA TURE AND FUNCTIONS Front .
5 1. GENERAL DESCRIPTION TOA's BG-1015, BG-1030, BG-1060, and BG-1120 Mixer Power Amplifiers can mix up to a total of 5 independent input signals. Power output is rated at 15 W for the BG-1015, 30 W for the BG-1030, 60 W for the BG-1060, and 120 W for the BG-1120.
6 1 3 2 4 5 6 7 8 9 INTEGRATED AMPLIFIER BG-1120 PROGRAM 10 0 TEL 01 0 0 MIC 10 10 00 1 0 AUX MODULE SIGNAL OFF POWER PEAK ON This figure represents the BG-1120. 3. NOMENCLA TURE AND FUNCTIONS [Front] 1. Power switch Press to turn ON the power. Press again to turn the power OFF.
7 10. Power cord Connect this cord to an AC outlet of 120 V AC. 11. Ground terminal A functional ground terminal. 12. AC outlet [UNSWITCHED] Continuously supplies up to 500 W of AC power to connected external equipment. 13. Breaker [UNIT] Cuts off the AC power to the unit when its input current exceeds the allowable value.
8 20. 1 W output volume control Adjusts the 1 W OUTPUT level. Rotate clockwise to increase and counterclockwise to decrease. 21. MOH output volume control Adjusts the MOH (Music On-Hold) output signal level. Rotate clockwise to increase and counterclockwise to decrease.
9 5. OUTPUT CONNECTIONS [Output terminals] Each amplifier has 3 speaker outputs: 4 Ω , 25 V and 70 V. Use only one of these outputs for connection. Class 2 wiring may be used. Note: The impedance in the figure below represents the total impedance of the speaker system.
10 6.2. Module Selector Switch Settings Set the rear panel-mounted Module Selector Switch to either the PAGE or BGM position, depending on the output terminal to which the module signal is to be sent. PAGE: Signals from the installed module are only sent to the speaker outputs.
11 [Muted signal settings] Use the unit's internal jumper switch JP301 to select the signal to be muted. Select either the input signal from the TEL, MIC, and MODULE (PAGE) terminals or from the AUX, PROGRAM, and MODULE (BGM) terminals as the signal to be muted.
12 7.5. Changing MIC and PR OGRAM Input T ypes Both MIC and PROGRAM inputs can be changed from electronically-balanced to transformer-balanced types in the procedures as follows. 7.5.1. MIC input • Install an optional IT-450 Line Transformer in the specified location on the printed circuit board.
13 7.5.2. Program input • Install an optional IT-453A Line Transformer in the specified location on the printed circuit board. • Cut off the JP205 and JP206 jumper wires.
14 10. CONTR OL SETTINGS Output levels are adjustable with individual volume controls. For music play or announcement, adjust the corresponding volume control so that the signal indicator lights intermittently. Note that the sound quality is downgraded when the peak indicator remains lit.
15 Mic – 60 dB/600 Ω Balanced Tel – 20 dB/10 k Ω Mute Module AUX – 10 dB/47 k Ω Program – 10 dB/10 k Ω IN OUT Option EBA I.T. Module 10 k Ω JP204 JP208 JP207 JP209 600 Ω ON OFF Phantom Power (DC 24 V) Option EBA I.T. I.T. Mic Vol. Tel Vol.
BG-1015 BG-1030 BG-1060 BG-1120 120 V AC, 60 Hz 15 W 30 W 60 W 120 W 50 W 80 W 160 W 260 W 40 W 60 W 100 W 150 W 50 – 20,000 Hz 0.05% at 1 kHz, rated output Mic: – 60 dB* 1 , 600 Ω , electricall.
An important point after buying a device TOA Electronics BG-1030 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics BG-1030 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics BG-1030 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics BG-1030 you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics BG-1030 will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics BG-1030, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics BG-1030.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics BG-1030. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics BG-1030 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
