Instruction/ maintenance manual of the product 15RTC Toa
Go to page of 26
15 INCH PREMIUM TFT-LCD CCTV MONITOR 15RTC INSTRUCTION MANUAL Please read this manual thoro ugh ly before us e, and keep it han dy for future reference.
SAFETY INSTRUCTION……………………………… …………………………………….2 – 3 1. Important Safety Instructions ………………………………… …………………………2 – 3 2. Safety Precautions ………………………… …………………………………… ……….
Important Safety Instructions 1). Read these instructions 2). Keep these instructions.. 3). Heed all warnings. 4). Follow all instructions. 5). Do not use this apparatus near water. 6). Clean only with dry cloth. 7). Do not block any ventilation opening s.
- The apparatus shall not be exposed to dri pping or spl ashing and that no objects filled with liquids, such as vases, shall be placed on the app aratus. - Minimum distances(e.g. 10cm)around the apparatu s for sufficient ventilation. “ WARNING - To reduce the risk of fire o r electric shock, do not expose the apparatus to rain or moisture.
CAUTION k The power supply cord is used a s the m a in disconne ct device, ensure that the socket-outlet is located/installed near the equipme nt and is ea sily accessible. ATTENTION N Le cordon d`alimentation est utillsé co mme interrupteur général.
NOTE This equipment has been tested and fou nd to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide rea sonable protection against harmful interference i n a residential installation.
A. SIDE PANEL CONTROL 1. DC 12V IN 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4. VIDEO 1(AV1) OUT Video looping output for AV1 5. VIDEO 2(AV2) IN Composite signal Input for AV2 6. VIDEO 2(AV2) OUT Video looping output for AV2 7.
B. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or O FF. There will be a few seconds delay before the d isplay appears. 2. SOURCE Select pc or video( AV1 / AV2 / S-Video / PC ) sources. 3. APC (Auto Picture Control) Select picture mode. 4. ACC (Auto Colour Control) Select Colour mode.
1 / 2. VOL ◀▶ Adjust the volume / Adjust menu settings. 3 / 4. ▲ / ▼ This button allows user to enter t he sub-menu of the activated function 5. SOURCE/SELECT Select PC or video source. Select On Screen Display menu 6. MENU / EXIT Activates and exits the On Screen Display.
OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Cu stom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Cu stom sub menu. Press the left(◀) / right( ▶ ) button to adjust picture setting.
A: CUSTOM MENU (Only PC mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Cu stom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Cu stom sub menu. Press (◀) / right( ▶ ) button to adjust pict ure setting.
B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Picture / Sound. Press the right( ▶ ) or ENTER button. 1. Picture Mode Press the up( ▲ ) / down( ▼ ) button to sel ect the Picture Mode.
2. Color Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the Col or Tone. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button to select the d esired color tone.
3. Mute Press the up( ▲ ) / down( ▼ ) button to select the Mute. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Mute.
4. Volume Press the up( ▲ ) / down( ▼ ) button to select the Volume. Press (◀) / right( ▶ ) button to adjust Volume. Press the MENU button to save.
Press the up( ▲ ) / down( ▼ ) button to sel ect PC sub m enu Press the right( ▶ ) or ENTER button and then left (◀ ) / right( ▶ ) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elem e nts.
1.Reset Press ENTER button to select the reset Reset : Select to reset all setting to the factory default values. INSTRUCTION MANUAL ……………………………………… ………………….
2. Language Press the up( ▲ ) / down( ▼ ) button to sel ect the Lan gu age menu. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to sel ect lang uag e.
3. OSD Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the OSD t one menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to sel ect the de sire OSD Tone.
4. Blue Screen Press the up( ▲ ) / down( ▼ ) button to sel ect the blue screen. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to select on or off.
5. Key Lock Press the up( ▲ ) / down( ▼ ) button to sel ect the key lo ck m enu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button select on or off Press the MENU button to save.
Us e the VESA standard mount design and the 100m m hole pattern on the back panel to install the L CD monitor to the mounting bracket using the (optional) mount ing bracket sold separately . Wall-mount Installation 1. Remove the monitor stand bracket assembled with monitor.
▶ PIN ASSIGNMENTS ▶ ACCESSORY INSTRUCTION MANUAL ……………………………………… …………………………………… 22 2. Power Cord 1.
This monitor features a power m anagement sy stem to “power do wn” upon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs th is signaling system through not sending horizontal, vertical, or sync signal.
LCD- Type 15 ˝ Diagonal A M-TFT(Active-Matrix) Pixel pitch(mm) : 0.297(H) X 0.297(V) BRIGHTNESS: 250cd/ ㎡ (Typical) CONTRAST RATIO: 700:1(Typical) RESPONSE TIME: 8 msec(Typical) RESOLUTION (H x V) 1024X768 @60Hz FREQUENCY HORIZONTAL: 31- 48KHz VERTICAL: 56-75Hz INPUT SIGNAL VIDEO(2ch input 1.
WEEE Symbols 25 ………………………………… ………………………………………… INSTRUCTION MANUAL “ Going to Sleep” message on screen Correct Disposal of This Product (Wa.
An important point after buying a device Toa 15RTC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toa 15RTC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toa 15RTC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toa 15RTC you will learn all the available features of the product, as well as information on its operation. The information that you get Toa 15RTC will certainly help you make a decision on the purchase.
If you already are a holder of Toa 15RTC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toa 15RTC.
However, one of the most important roles played by the user manual is to help in solving problems with Toa 15RTC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toa 15RTC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
