Instruction/ maintenance manual of the product Max 309-355 Thunder Max
Go to page of 8
www.Thunder-Max.com 309-360 Installation / Se tup Guide V2009.04.23 ProductSupport@ ZippersPerformance.com 1 Part # 309-360 for Big Twin Models Thank you for purch asing a ThunderMax ECM! Please read through the following in structions before beginning the installation pro cedure.
www.Thunder-Max.com 309-360 Installation / Se tup Guide V2009.04.23 ProductSupport@ ZippersPerformance.com 2 Softail® Models ST-A: Remove the seat, locate and remove the ECM fuse. Remove the stock EC M from the motorcycle and the wiring harness plug from the ECM.
www.Thunder-Max.com 309-360 Installation / Se tup Guide V2009.04.23 ProductSupport@ ZippersPerformance.com 3 FXD-B: Remove the stock ECM from the electrical caddy. The caddy must be slig htly modified for additional main harness connecto r cleara nce.
www.Thunder-Max.com 309-360 Installation / Se tup Guide V2009.04.23 ProductSupport@ ZippersPerformance.com 4 Step 3 Load a Base Map to your SmartLink softwa re. Selecting a base map for your Thu nderMax is easy thanks to the filtering system in th e SmartLink soft ware.
www.Thunder-Max.com 309-360 Installation / Se tup Guide V2009.04.23 ProductSupport@ ZippersPerformance.com 5 Configuration] , then double-click ‘ Basic Settings’ . The basic pa settings ge opens. Check to see if the [Speedo Cal] calibra tches ear and model; if not, click th c alue as shown, then click [Close] .
www.Thunder-Max.com 309-360 Installation / Se tup Guide V2009.04.23 ProductSupport@ ZippersPerformance.com 6 When the Diagnostic Co des window appears, select [Clear Diagnostic Codes]. After completing this step, select Basic Settings from the Modu le Configuration click ed Loop Configuration] .
www.Thunder-Max.com 309-360 Installation / Se tup Guide V2009.04.23 ProductSupport@ ZippersPerformance.com 7 CLOSED LOOP PROCESSING When equipped with AutoTune, your SmartLink soft ware will allow you to set Air/Fuel tuning parameters for your ThunderMax and its inst alled base map.
www.Thunder-Max.com Installation / Setup Gui de V2009.04.23 ProductSupport@ ZippersPerformance.com 8 AL TIPS AND GENER • INFORMATION Several support features are located under the [Help] menu; some require an intern et connectio n. • A comprehensive Tuning Manu al in PDF format is included on the CD for viewing and printing from your desktop.
An important point after buying a device Thunder Max Max 309-355 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Thunder Max Max 309-355 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Thunder Max Max 309-355 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Thunder Max Max 309-355 you will learn all the available features of the product, as well as information on its operation. The information that you get Thunder Max Max 309-355 will certainly help you make a decision on the purchase.
If you already are a holder of Thunder Max Max 309-355, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Thunder Max Max 309-355.
However, one of the most important roles played by the user manual is to help in solving problems with Thunder Max Max 309-355. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Thunder Max Max 309-355 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center