Instruction/ maintenance manual of the product RR420CD THOMSON
Go to page of 11
EN.
EN Main Connections (For UK only) CAUTION: For UK Only CONNECT THE MAIN LEAD INTO AC MAINS POWER SOCKET POWER SUPPL Y 230V . It must not be connected to D.C. mains. Note: The mains lead of the set is fitted with a moulded plug. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below .
EN 1 W ARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD , DO NO T EXPOSE THIS PR ODUCT TO RAIN OR MOISTURE. SEE MARKING ON BO TT OM / B A CK OF PRODUCT CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN THE EXCLAMA TION POINT WITHIN THE TRIANGLE IS A W ARNING SIGN ALERTING Y OU OF IMPORT ANT INSTRUCTIONS A CCOMP ANYING THE PRODUCT .
EN 2 Safety Information Do not place the system near wet areas such as bathrooms and pool side. Do not expose this appliance to rain or moisture A void storing the system at humid places or near abnormally heated areas. Power is continuously supplied to the system.
EN Befor e you begin This clock radio is equipped with a memory holding system that can be powered with 9V battery (not included). The power failure protection circuit will not operate unless battery is installed.
EN 4 Operating the Clock Setting time: 1. Press the SET button, the “ : “ will flash on the display . 2. Press REV or FWD to set the time. Tip Tip Tip Tip Tip : No icon will be flashing if all selectors are set, if you see any icon flashing on display, press the SET button repeatedly to confirm everything is set correctly .
EN Operating the Radio T uning the Stations 1. Press ON to turn on the radio. 2. Slide the MW/FM switch to the desired broadcast band. 3. T urn the TUNING knob to select a station. 4. Press OFF to turn of f the radio. Built-In AFC The Built In Automatic Frequency Control (AFC) works only on FM.
EN 6 Operating the CD player Listening to compact disc 1. Lift to open the CD compartment door . 2. Insert a disc and close the door . 3. Press PLA Y/P AUSE . 4. Adjust volume to your desired level. 5. Press REV or FWD to skip back- ward and forward. 6.
EN Operating the Alarm Setting the W AKE Time Y our digital clock operates on a 24 hour standard mechanism. 1. Press the SET button until ALARM 1 / ALARM 2 icon is blinking. 2. Press REV or FWD to set the wake time. The time decrements or increments will follow by a faster rate when you press and hold either REV or FWD .
EN 8 Operating the Clock Radio Sleep Mode In sleep mode, the radio or CD will turn of f automatically . Simply: 1. Listen to CD or radio. 2. While holding SLEEP , press REV or FWD to set the sleep time. The time range is from 1 minute to 2 hours. 3. Release SLEEP and the current time will be shown again.
EN Operating the Clock Radio Snooze Alarm Operation This operation allows extra sleep time after the alarm is on. The alarm will turn of f by pressing SNOOZE until the snooze period is over . Snooze function can be used repeatedly up to 2 hours. After this, the alarm will turn of f until the next alarm conditions are met.
An important point after buying a device THOMSON RR420CD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought THOMSON RR420CD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data THOMSON RR420CD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, THOMSON RR420CD you will learn all the available features of the product, as well as information on its operation. The information that you get THOMSON RR420CD will certainly help you make a decision on the purchase.
If you already are a holder of THOMSON RR420CD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime THOMSON RR420CD.
However, one of the most important roles played by the user manual is to help in solving problems with THOMSON RR420CD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device THOMSON RR420CD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
