Instruction/ maintenance manual of the product 85UZ8866 Thomson
Go to page of 24
EN 1 English Important information Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identication sticker located at the back of your set. Where the mains plug or an appliance coupler is used as disconnect device, it shall remain readily operable.
EN 2 English Information for Users on Disposal of Old Equipment and Batteries [European Union] These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at their end- of-life.
EN 3 English Important information ………………………………… 1 Chapter 1 - Connections Connect the power and antenna …………………… 4 DVD player, home theatre system, PC …….
EN 4 English Connect the power and antenna T o switch on TV after connecting power cord, press or POWER/ . Note: Position of power socket varies according to TV model. On certain models, you have to turn on the power switch rst. Cable Notes: - Disconnect the power cord before connecting devices.
EN 5 English Blu-ray Disc player , HD game console & HD camcorder Notes: - USB connectors are for data input from USB drives and for connecting other relevant USB devices where applicable. - All USB devices have to be directly connected to TV set without cable extenders.
EN 6 English Remote control functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to congure all the general settings.
EN 7 English Important : Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Remove batteries when the remote control is not to be used for a long time. Batteries left in equipment may cause damage through deterioration and corrosive leakage, invalidating the guarantee.
EN 8 English Chapter 3 - Installing channels Initial setup Initial setup involves selecting all the settings required to be able to search for and store all the analogue and digital channels you can receive. Make sure that the television is switched on and follow all the steps in turn specied hereafter.
EN 9 English Installing channels • Press OK to skip the country selection and enter the next step. Or use ◄/► to reselect your country, then press OK to enter. - If you select Digital & Analogue , then press OK/► to enter. Select your scan mode if available and congure proper cable information in the same way as in Initial setup.
EN 10 English Chapter 4 - Using your TV Accessing channels Using the numeric buttons: press the corresponding numeric buttons on the remote control to access the channels. Using the P+/- buttons: press the P+/- buttons on the remote control or the corresponding buttons on the TV set to scroll through the channels.
EN 11 English Chapter 5 - Using more of your TV Setting up your favourite channels You can create a list of your favourite TV channels. 1. Press LIST . 2. Press the yellow button to enter Channel list selection . Press ▲/▼ to select the favourite list and press OK to enter.
EN 12 English Using more of your TV You can use this feature if the current broadcast contains audio description. 1. Press MENU on the remote control and select Sound , then press OK to enter. 2. Use ▲/▼ to select Audio Description , then press OK to enter.
EN 13 English Using more of your TV Note: The options you may choose depend on the programme you are watching. If you select PCM and the sound is ahead of the picture, you can select SPDIF delay from the Settings menu and press ◄/► to adjust the delay time to synchronize the sound with the picture.
EN 14 English Using more of your TV • Use ◄/► to select No under Auto download to decline the automatic download. • Use ▲/▼ to select Manual Download and press OK/► if you wish to search manually for the latest software. Follow the on-screen instructions to complete.
EN 15 English Using more of your TV - Audio only: Select and press OK to listen to the music with the screen turned off. Any key press will turn the screen on. 4. Press the related buttons on the remote control to perform the available functions shown on the function bar at the bottom of the TV screen.
EN 16 English Using more of your TV Notes: - Before you connect the USB drive to the TV, make sure you have backed up the data in the drive to avoid the loss of your important data due to unforeseen malfunction. - We recommend you use a USB drive with free capacity above 1GB and disk speed faster than 5.
EN 17 English Using more of your TV 5. To watch the recorded programme, exit PVR mode rst and go to Media > Video . Select the folder PVR, then select the related record le. Press OK to play. (It is the same if you record a digital radio programme).
EN 18 English Chapter 6 - Network High-Gain USB Adapter (USB dongle) delivered with your TV to your TV’s USB 1 port. 1. Press MENU on the remote control and select Network > Network settings > Internet connection . Press ◄/► to select On .
EN 19 English Network 5. To check the Internet connectivity, follow the instructions in steps 3 and 4 of the preceding section Connecting to a wired network . 6. To see the information on current connection, follow the instructions in step 5 of the preceding section Connecting to a wired network .
EN 20 English Chapter 7 - DLNA (Share & See) Note: This manual covers products with either Share & See or DLNA function. Share & See is DLNA-compatible. Connecting to your PC Make sure to set up a wired or wireless connection from your TV to a router rst.
EN 21 English Chapter 8 - HbbTV HbbTV (Hybrid broadcast broadband TV) is a service offered by certain broadcasters and available only on some digital TV channels.
EN 22 English Chapter 9 - Smart TV Allows you to enjoy Internet Applications (Apps), specially adapted Internet websites for your TV. You can control the Apps with the TV remote control. WARNING: • Congure the network settings before using Smart TV .
EN 23 English Chapter 10 - Other information Password in Parental Control - The default password is 1234. You can change it to a new one. - The super password is 0423. If you forget your code, enter the super password to override any existing codes. Troubleshooting Please check the following list before requesting service.
EN 24 English Other information or medium any content or services displayed through this device. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE AND ACCURACY IS WITH YOU.
An important point after buying a device Thomson 85UZ8866 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Thomson 85UZ8866 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Thomson 85UZ8866 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Thomson 85UZ8866 you will learn all the available features of the product, as well as information on its operation. The information that you get Thomson 85UZ8866 will certainly help you make a decision on the purchase.
If you already are a holder of Thomson 85UZ8866, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Thomson 85UZ8866.
However, one of the most important roles played by the user manual is to help in solving problems with Thomson 85UZ8866. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Thomson 85UZ8866 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
