Instruction/ maintenance manual of the product USR-100 Telex
Go to page of 26
T elex Operating Instructions USR-100.
Table of Contents General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 USR-100 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Frequency Agility . . . . . . . . . . . . . .
Table of Contents (continued) SH-100 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Battery Test Button . . . . . . . . . . . .
GENERAL INFORM ATION The Telex Model USR-100 Receiver and associated Transmitters is a 100 Channel, frequency-selectable full diversity system operating within the frequency range of 668.
Posi Phase Diversity The USR-100 receiver utilizes Telex’s patented Posi Phase auto diversity circuit. Unlike other types of diversity which receive with only one antenna at a time, Posi Phase utilizes both antennas at all times. This results in a stronger signal from the microphone for cleaner audio and greater range.
Displays The 7 Segment LED channel display already mentioned (00 to 99). 2. A 5 segment LED light array for AF, that aids in setting micro - phone gains and monitoring receiver microphone and line level outputs. Light numbers 4 and 5 have a Peak Hold feature.
USR-100 Receiver Specifications RF Frequency Range . . . . . . . . . . . . . . . 668.0 to 746.0 MHz Channels . . . . . . 100 (0-99) (within TV Ch. 47/48 & 58/59) R.F. Stability . . . . . . . . . . . . . . . . . . . . . . . . 0.005% or better Modulation Type .
Model SH-100 Transmitter Specifications Frequency of operation . . . . . . . . . 668.000 to 746.000 MHz. (Current models operate in 2 frequency ranges.) 668.000 to 679.500 MHz and 734.100 to 745.500 MHz. Number of Channels . . . . . . . . 100 User Selectable Channels in each range.
Model LT-100 Transmitter Specifications Frequency of operation . . . . . . . . . 668.000 to 746.000 MHz. (Current models operate in 2 frequency ranges.) 668.000 to 679.500 MHz and 734.100 to 745.500 MHz. Number of Channels . . . . . . . . . . . . . . .
Figure 1 Front Panel Power Switch: When turned on, the channel display illuminates and one of the diversity lights will come on. Channel Select Buttons: Push once to increase display by one. Push and hold to increase display more than one. Left button changes “10’s”, Right button changes “1’s”.
Figure 2 Rear Panel Antenna Jacks: Two antenna jacks for posi phase diversity recep - tion. Attach an antenna to each jack. Audio Output: XLR type jack connects to audio sound system (Amplifier/Mixer). Pin 1 ground, Pin 2 +, Pin 3 -. Audio Adjust: Screwdriver adjustable potentiometer, controls audio output.
Receiver Set-up Connect the supplied AC power adapter to an AC outlet supplying 105 to 125 volts AC, 60 Hz. The 230 volt export model should connect to an AC outlet supplying 210-240 VAC, 50-60 Hz.
Figure 4 SH-100 Bottom View -10-.
SH-100 Power Switch: Located on the bottom of the handle. Battery Test Button: Press to check the remaining life of the batteries. Battery Meter: The number of segments that light when the Battery Test Button is pushed indicate the approximate time of battery life remaining.
Figure 5 LT-100 LT-100 Power Switch: Located on the top of the case. Battery Test Button: Press to check the remaining life of the batteries. Battery Meter: The number of segments that light when the Battery Test Button is pushed indicate the approximate time of battery life remaining.
Channel Select Switches: Control the transmit channel. Must be set to match the channel of the receiver. Microphone Gain: Controls the gain of the audio circuit to prevent under or over modulation. Transmit Power Switch: Set to high for maximum range.
System Set-Up NOTE: Whe employing two or more wireless microphones, the transmitters should be a minimum of 10-15 feet away from the receiver(s) to prevent “front-end” overload. Turn on the receiver. Set the Channel to the number desired on both the transmitter and receiver.
Remote mounting antennas will increase the effective reception range when appropriately positioned. The two 1/4 wave antennas supplied are not ground independent and therefore not appropriate for remote mounting. See the accessories section of this manual for remote- mountable antenna options.
Figure 7 Antenna Placement with Accessory Brackets and Cables If possible, do not mount the brackets on a wall. See Figure 7 for bracket and antenna placement. Antenna Connection Attach the two antenna cables to the back of the USR-100. Be sure the connectors are tightened securely.
Installing Rack Mounts The USR-100 is supplied with rack mounts for both double and single mounting in a 19" equipment rack. For single mounting, the long and short rack “ears” are used. For dual mounting, use the short “ears and the mid brackets from two USR-100’s.
Double Mounting: Align the mid brackets (Item No. 2) with the holes on the adjacent sides of each unit. Install the previously removed screws. Insert an additional screw (Item No. 4 provided in the parts pack) into the remaining holes. Tighten all screws securely.
ACCESSORIES AND REPLACEMENT PARTS Model AB-2 Combination Antenna Bracket with hardware and 10 foot (3 meter) coaxial cable TNC Connectors. Use with Model CAL-X Antennas. Order No. 71138000 AC Power Supply 120 V olt, 60 Hz Order No. 730131 1/4 Wave Replacement Antenna Part No.
Model ALP-450 450-900 MHz Directional Log Periodic Antenna includes mounting hardware and 10 foot (3 meter) coaxial cable with TNC Connectors. 9 1/2" long x 11" high. Unique forward coverage pattern increases signal gain up to 5 db. Covers all frequencies and increases range.
FCC INFORM ATION The TELEX Model USR-100 receiver is authorized under Part 15 of the Federal Communication Commission. Licensing of TELEX equip - ment is the user’s responsibility and licensability depends upon the user’s classification, and frequency selected.
CUSTOMER SERVICE INFORMATION If your receiver or transmitter should need servicing under the warranty, please contact: Customer Service Department TELEX COMMUNIC ATIONS, INC. 8601 East Cornhusker Highway, P.O. Box 5579, Lincoln, Nebraska 68505-5579 U.
TELEX COMMUNICATIONS, INC. 8601 East Cor nhusker Highway w P.O. Box 5579 w Lincoln, Nebraska 68505-5579 PN 801585-1 JUNE 1998.
An important point after buying a device Telex USR-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telex USR-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telex USR-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telex USR-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Telex USR-100 will certainly help you make a decision on the purchase.
If you already are a holder of Telex USR-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telex USR-100.
However, one of the most important roles played by the user manual is to help in solving problems with Telex USR-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telex USR-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
