Instruction/ maintenance manual of the product sc-600 Telex
Go to page of 7
Telex Instruction Sheet General Description The SC-600 Amplified Broadband Split - ter-Combiner makes it possible to operate eight UHF wireless intercom transceivers using only two antennas.
System Configuration Figure 2 illustrates the typical system configura- tion using the SC-600. SPECIAL NOTE: In any system, unused splitter outputs should be terminated with a 50 ohm “dummy load”. See the accessories listing at the end of this manual.
-3- Figure 2 System Configuration TRANSMIT ANTENNA TRANSMIT DC OUTPUT RECEIVE RECEIVE ANTENNA 110/220 V AC INPUT FUSE: F 1.5A 250V RECEIVE ANTENNA TRANSMIT ANTENNA RECEIVE TRANSMIT POWER RECEIVE TRANS.
Antenna Requirements The SC-600 may be used with a variety of an- tennas. For best results, use a pair of ALP-450 directional log periodic antennas (See Figure 3) or, the ALP-600 Bi-directional log periodic an- tenna (See Figure 4).
Antenna Placement for Optimum Range and Rack Mounting For maximum range and when rack mounting, the antennas must be remotely located. The ALP-450 and ALP-600 antennas come com- plete with a variety of mounting hardware and 10 feet (3 meters) of low loss coaxial cable.
SC-600 Accessories and Replacement Parts ALP-600 520-760 MHz Bi-Directional log periodic antenna Includes mounting hardware and 10 feet (3 me- ter) coaxial cable with TNC connectors Order No. 878896 Special low loss antenna cables with TNC connectors TP-2 50 OHM/TNC dummy load (For unused outputs) Part No.
Antenna Mast Four section, clear anodized aluminum mast with extended length of 90 1/4" Order No. 878897-1 (Antenna not included) Antenna Bracket Kit Aluminum Brackets with vertical or horizontal mounting capability Order No. 878898 -7- Tel ex PRINTED IN U.
An important point after buying a device Telex sc-600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telex sc-600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telex sc-600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telex sc-600 you will learn all the available features of the product, as well as information on its operation. The information that you get Telex sc-600 will certainly help you make a decision on the purchase.
If you already are a holder of Telex sc-600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telex sc-600.
However, one of the most important roles played by the user manual is to help in solving problems with Telex sc-600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telex sc-600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
