Instruction/ maintenance manual of the product 80 Telex
Go to page of 11
Application Guide Kenwood Radio Series 80, 90 and 150/180 To IP-223 November 4, 2005 P/N AN-VEGA-1 Rev D.
II IP-223 to Kenwood Radios Table of Contents 1 General ................................................................................... 1 2 Setup ....................................................................................... 1 2.1 TK-x150/180 Model Cable Assembly: .
IP-223 to Kenwood Radios 1 1 General The application note is intended to show how to assemble the cab le and setup the hardware of the IP223 for channel change and FleetS ync applications using Kenwood radio. 2 Setup 2.1 TK-x150/180 Model Cable Assembly: NOTE: There are differences between the TK- x150 and TK-x180 radios DB25 connectors.
2 IP-223 to Kenwood Radios 2.2.1 IP223 Rev F or high er Board Configuration: Set the jumper J35 to B position for line 1 and the jumper J26 to B position for line 2 IP223 DB9 IP223 Serial Signal Line 1 Line 2 KCT-19 Accessory Conn. TXD 9 4 14 RXD 1 6 15 2.
IP-223 to Kenwood Radios 3 2.3.2 IP223 Rev A to Rev E Board Modifications: Lift Pin 12(line 1) or pin 9(line 2) of U45 accord ing to the lin e selected and solder to its PCB Pad.
4 IP-223 to Kenwood Radios 2.4 IP223 Configuration: Setup the desired IP223 line for Kenwood radio control at th e following screen: 2.4.1 Per-line setup screen Choose radio model in the Serial Port Mode box (A) . Change Serial Port Parameter box to 9600.
IP-223 to Kenwood Radios 5 2.5 Radio Configuration 2.5.1 TK-x80 Series Program Com 1 for DATA.
6 IP-223 to Kenwood Radios 2.5.2 TK-x90 Series Program Function Port, Input scr een for Ext PTT in Radio 1 Al1..
IP-223 to Kenwood Radios 7 Program Function Port, Output sc reen for COR in Radio 1 AO1..
8 IP-223 to Kenwood Radios 2.5.3 TK-x150/180 Series Program Function Port, Aux Input for External PTT in AUX I nput4 location and COR in AUX Output1. Program Com 1 for DATA.
IP-223 to Kenwood Radios 9 For the TK-x180, the AUX programming screen is diffe rent. Please note that the same interface cable is used for both the TK-x150 and TK-x180 ra dios.
An important point after buying a device Telex 80 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telex 80 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telex 80 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telex 80 you will learn all the available features of the product, as well as information on its operation. The information that you get Telex 80 will certainly help you make a decision on the purchase.
If you already are a holder of Telex 80, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telex 80.
However, one of the most important roles played by the user manual is to help in solving problems with Telex 80. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telex 80 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
