Instruction/ maintenance manual of the product GFC7000EU Teledyne
Go to page of 9
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 1 MODEL GFC7000EU CO 2 ANALYZER (Addendum to GFC7000E Manual PN 04584) Teledyne Analytical Instruments 16830 Chestnut St. City of Industry, Ca. 91748 TEL: 626-961-9221 FAX: 626-961-2538 TEL: 626-934-1500 E-MAIL: ai-customerservice@teledyne.
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 2 OVERVIEW The model GFC7000EU is a close derivative of the Model GFC7000E CO Analyzer. The optical bench is longer (14 m), making the instrument more sensitive at low CO 2 levels.
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 3 Humidity Range 0-95% RH, Non-Condensing Temp Coefficient < 0.05 % of reading per ° C (5 ppb/ ° C minimum) (6) Voltage Coefficient < 0.05 % of reading per V Dimensions (HxWxD) 7" x 17" x 23.
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 4 There are 4 relay alarm outputs (AL1-AL4) on the rear panel. AL1 is for system okay, AL2 is for concentration limit 1 exceeded and AL3 is for concentration limit 2 exceeded.
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 5 SAMPLE WHEEL TEMP WARNING CO = XX.XX TEST CAL MSG CLR SETUP Make SURE warning messages are NOT due to LEGITIMATE PROBLEMS. . Press CLR to clear the message currently being Displayed.
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 6 Warning Message Fault Condition Possible Causes FRONT PANEL WARN The CPU is unable to Communicate with the Front Panel Display /Keyboard WARNING only appears on Serial I/O COM Port(s) Front Panel Display will be frozen, blank or will not respond.
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 7 Warning Message Fault Condition Possible Causes on wheel rotation.
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 8 #N05ATI 009690000 Filter, TFE, 47 mm 5 um, Qty 100 009690100 Filter, TFE, 47 mm 5 um, Qty 25 009820.
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 9 OR0000001 O-Ring, Flow Control OR0000058 O-Ring, Sample Filter, 47 mm, 2-228V OR0000034 O-Ring, Inp.
An important point after buying a device Teledyne GFC7000EU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teledyne GFC7000EU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teledyne GFC7000EU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teledyne GFC7000EU you will learn all the available features of the product, as well as information on its operation. The information that you get Teledyne GFC7000EU will certainly help you make a decision on the purchase.
If you already are a holder of Teledyne GFC7000EU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teledyne GFC7000EU.
However, one of the most important roles played by the user manual is to help in solving problems with Teledyne GFC7000EU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teledyne GFC7000EU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
