Instruction/ maintenance manual of the product RETRO1 Baumatic
Go to page of 20
RETRO1 FRIDGE-FREEZER.
1 User Manual for your RETRO FRIDGE-FREEZER NOTE : This User Instruction Man ual contains imp ortant information, including safety & installation points, w hich will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available fo r future reference.
2 YOUR FRIDGE-FREEZER’S SPECIFICATIONS …….…….3 SAFETY INFORMATION / ENVIRONMENTAL NOTE …. 4 USING YOUR FRIDGE -FREEZER…………………………5-18 YOUR RETRO FRIDGE -FREEZER………………………….5 BEFORE USING YOUR FRIDGE-FREEZER………………6 USING YOUR FRIDGE-F REEZER…………………….
3 Congratulations on purchasing a Baumatic RETRO Fridge! Your Fridge has:  Gross capacity: 195 litres  Net capacity (fridge / freezer): 175/20 litres  Energy efficiency class: A  Star rating: .
4 ELECTRICAL SAFETY • NOTE - This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shoc k by providing a path of least resistance of electrical current. You will be able to tell if it is because a non-grounded appliance will give off an electrical discharge.
5 Your RETRO Refrigerator Usin g y our Baumatic RETRO Refri g erator: KEY 1. Dairy Section – For storing dair y products such as butter and cheese. 2. Small Pocket – For storing small, packaged foods. 3. Small Bottle Rack – For storing smaller bottles & containers.
6 UPON DELIVERY: When your refrigerator has be en delivered, you will need to wait approximately 8 hours before turning it on. The fluid of the compressor installed in the appliance will need time to settle. PL EASE DO NOT PLUG IN ANY EARLIER THAN THIS! NOTE : THERE CAN BE AN ODOUR WHEN YOU FIRST SWITCH ON THE APPLIANCE.
7 PLEASE FAMILIARISE YOURSELF WITH THE DISPLAY PANEL AT THE TOP OF THE UNIT (ILLUSTRATED BELOW). THERMOSTAT • The thermostat automatically settles the temperature inside the appliance. Turn the knob from setting ‘0’ to setting ‘5’ to obtain increasingly colder temperatures.
8 NOTE : When you first switch on the appliance, allow 24 hours for it to cool down to the desired temperature. During this time, DO NOT open the door often or place a lot of food inside the unit.
9 Reminder : Allow the unit time to settle after delivery. If your plug and power socket are now behind the fridge and you still need to move the unit into place, be especi ally careful: Remember to leave a safe distance between the back of the fridge and the wall.
10 • To reduce humidity and the consequent increase of frost, NEVER place liquids in unsealed containers in the refrigerator. Frost tends to concentrate in the coldest parts of the evaporator. In time, the unit will need more frequent defrosting if too much humidity develops inside it.
11 DEFROSTING YOUR REFRIGERATOR WILL NOT REQUIRE DEFROSTING AS DEFROSTING OCCURS AUTOMAIALLY. HOWEVER, YOU WILL HAVE TO DEFROST THE ICE BOX (FREEZER COMPARTMENT) WHEN THE FROST IS 3-5 MM THICK OTHERWISE YOUR APPLIANCE WILL NOT WORK EFFICIENTLY.
12 NOTE: Before attempting to clean your Fridge-Freezer, UNPLUG IT and make sure you do the following: 9 Remove the baskets and the ice-cube tray. 9 Leave the door open. 9 In order to collect water deposits, take out the bottom drawer and soak up the water using a sponge.
13 1) Allow for adequate space and install your fridge on a firm, level floor. This is very important as the appliance must be level so that there will be no unnatural noises or poor cooling. 2) Ensure that you are going to be placing your fridge- freezer away from heat sources and in a well-ventilated position.
17.
14 YOU MUST install this appliance in well ventilated, dry room. Energy use is affected by the ambient temperature. You are therefore advised to: Not expose the appliance to direct sunlight; N.
15 Trace a problem using the table below i nstead of having to call for help. PROBLEM WHAT TO DO CHECK THAT THE PLUG IS WELL-INSERTED INTO T HE POWER SOCKET THAT THERE IS POWER FROM THE MAINS – THERE MAY BE A BLACKOUT OR YOUR FUSES MAY HAVE BLOWN.
16 BAUMATIC LTD. -CONDITIONS OF GUARANTEE. Dear Customer, The conditions of guarantee which apply to your Baum atic appliance are as follows: This product is guaranteed for 12 months from the date of original purchase. Baumatic Ltd will repair any defect that arises due to faulty materials or wo rkmanship free of charge during this period.
17 Baumatic Ltd Make-up for your kit chen Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephon e +44 118 933 6900 Sales Fax +44 118 9.
18.
An important point after buying a device Baumatic RETRO1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic RETRO1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic RETRO1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic RETRO1 you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic RETRO1 will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic RETRO1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic RETRO1.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic RETRO1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic RETRO1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
