Instruction/ maintenance manual of the product BW300SS Baumatic
Go to page of 28
BW300SS 30 cm 12 Bottle built- in electronic wine cooler.
USER MANUAL FOR YOUR BAUMATIC BW300SS 30 cm 12 Bottle built-in electronic wine cooler NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance.
3 Contents E n v i r o n m e n t a l n o t e 4 Important safety informa tion 5 – 6 Specifications of your wine cooler 7 – 8 Description of the appliance 8 - 1 0 C o n t r o l p a n e l 8 Descripti.
Environmental note Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be undertake n by a competent person.
Important safety information Y o u r s a f e t y i s o f t h e u t m o s t i m p o r t a n c e t o B a u m a t i c . Please make sure that you re ad this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line.
Child safety 6 o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket.
Specifications of your wine cooler Congratulations on purchasing a Baumatic wine cooler Dimensions of appliance Dimensions of aperture* Height: 820 - 890 mm Height: 820 - 890 mm Width: 300 mm (min) Width: 295 mm Depth: 553 mm (min) Depth: 550 mm o Gross capacity: 55 litres o Net capacity: 52 litres o Bottle capacity: 12 x 0.
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. I n o r d e r t o f i n d o u t t h e c l i m a t i c r a t i n g o f y o u r a p p l i a n c e , y o u s h o u l d check the rating plate. The rating plat e is located on the rear or inside of the appliance.
9 Description of the product features 1) Control panel o The control panel is located at th e top of the app liance, behi nd the glass door. This means it is easy to set the temperature of the appliance and see what temperature the appliance is set to.
7) Error codes o If the appliance senses a proble m, then an audible alarm will sound and an alarm code will show on the LCD display (5) . See the error codes section of this manual for more detailed information.
11 Switching on the appliance and setting the temperature o After following the installation instructions contained in this booklet, connect the applia nce to your mains supply. o The appliance will be preset to a temperature of 13 °C. o To adjust the operating temper ature, press the temperature setting button (2) .
Loading the wine cooler o IMPORTANT: You r appliance is ideally suited to store 0.75 litre wine bottles. o T o f i t 3 w i n e b o t t l e s o n a s h e l f , y o u s h o u l d l o a d i t i n t h e w a y shown in the above drawing. o Always check that you can close the door without it fouling on a wine bottle, before shutting it.
13 ** Chardonnay is often served too cold . You should chill it at a warmer temperature inside of your wine cool er. Or leave it to warm slightly when you remove it from your wine cooler. o Temperature stability is the most important factor when it comes to storing wine.
14 o To make the most of the bouque t and taste of your wine, never fill more than half a glass at a time. It will also help if the shape of your wine glass is appropri ate for your wine. The size and shape of your wine glass’s bowl will determine the intensity and complexity of the bouquet.
A g o o d w a y t o g e t a r o u n d s e d i m e n t ( i f i t i s a p r o b l e m ) i s t o s t a n d t h e bottle upright, the day before openin g, so that the sediment can settle to the bottom of the bottle. You can also decant your wine; deca nting will “open up” the flavour of both young and old wines, but younge r wines in particular.
Defrosting o Defrosting occurs automatically inside of the wine cooler during operation. The defrost water is collected by the evaporating tray and evaporates automatically. o The evaporating tray and defrost water drain hole should be cleaned periodically.
17 o The wiring in the mains lead is coloured as follows: Brown Live Blue Neutral Green and yellow Earth o As the colours of the wires in th e appliance’s mains lead may not correspond with the colo.
o Place the appliance flatly and firmly on a solid base. The appliance is fitted with adjustable feet, which should be used to level the appliance. o B e s u r e t o l e a v e e n o u g h s p a c e for the opening of the door, to avoid damage to the appliance or personal injury.
Reversing the door of your wine cooler This appliance has the capability of the door opening from either the left or right hand side. The unit is delivered to you with the door opening from the left side.
1) Remove the hinge screws (1) , upper left hand hinge (2) and upper right hand hinge (3) from the appliance, using a Phillips head screw driver (S1) . 2) Remove the wine cooler door (8) from the appliance and place it onto a cushioned surface so that damage does not occur to it.
9) Place the upper door pin (4) into the hole on the left ha nd side of the wine cooler door (8) . Tighten the upper door pin fully, using a flat head screwdriver (S2) . 10) Fix the upper left hand hinge (2) to the opposite side of the cabinet using the hinge screws (1) , ensuring that the screws are fully tightened.
Troubleshooting IMPORTANT: If your wine cooler appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist below. PROBLEM POSSIBLE CAUSE Appliance does not operate Not plugged in. The circuit breaker has tripped or the fuse has blown.
23 Error codes If your appliance senses that it is not operating co rrectly, then an error code may appear on the LCD display. The following error codes can possibl y be remedied by the customer and the steps outlined below should be followed.
IMPORTANT: If your app liance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Customer Care Department on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
Czech Republic United Kingdom Baumatic CR spol s.r.o. Baumatic Ltd., Pr ů myslová zóna Sever 696 Baumatic Buildings, 460 11 Libe rec 11 6 Bennet Road, Czech Republic Reading, Berkshire RG2 0QX +420 483 577 200 United Kingdom www.baumatic.cz Sales Telephone (0118) 933 6900 Slovakia Sales Fax Baumatic Slovakia, s.
.
27.
28.
An important point after buying a device Baumatic BW300SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic BW300SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic BW300SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic BW300SS you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic BW300SS will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic BW300SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic BW300SS.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic BW300SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic BW300SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
