Instruction/ maintenance manual of the product MP3400 Tekkeon
Go to page of 16
MP3300/MP3400 User Guide Universal Rechargeable Batter y mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 1.
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 2.
USER GUIDE Contents Overview ................................................................................................2 Getting Started ........................................................................................2 Unpacking myPower ALL .
2 Over view Y ou can use myPower™ ALL —the universal rechargeable battery—to power just about any portable device. Simply connect myPower ALL to your portable DVD player , notebook computer , digital camera, digital camcorder , portable CD player , PDA, mobile phone, or other portable device to extend the battery life.
3 USER GUIDE Getting to Know myPower ALL Charging myPower ALL myPower ALL will charge in four hours when completely empty . The green CHARGE indicator will turn on after the battery is 80% charged. Therefore, you should view the actual batter y capacity before disconnecting the power adapter to stop charging.
4 Using myPower ALL myPower ALL can be used to power and/or charge your portable device. With devices that require higher voltage levels, like notebook computers and portable DVD players, we recommend that you use myPower ALL only to power the device.
5 USER GUIDE 3. Connect the adapter plug to the power output cord (but not the device). If you are using a UA-xxx adapter (rather than P A-xxx), you must insert the L34 adapter that came with your myPower ALL between the adapter cord and UA-xxx adapter as shown.
6 2. With the voltage lock in the unlocked position (switched right to VOL T AGE), set the voltage output to the voltage selection that is equal to or one increment higher than the voltage identified for your device. T o do this, press the voltage selector until the voltage indicator turns on under the appropriate voltage selection (3, 4.
7 USER GUIDE 3. Slide the voltage lock to the locked position (switched left to LOCK). This will prevent you from accidentally selecting a different voltage while your device is connected. 4. T o change the voltage, slide the voltage lock to the unlocked position (VOL T AGE), and select a new voltage.
8 Connect the Portable Device 1. Connect the adapter plug into the power jack on the portable device. 2. T urn on the portable device and use it as you would normally . While connected, myPower ALL will power and charge your device. (As mentioned earlier , myPower ALL will not charge a device if the voltage setting is lower than that required.
9 USER GUIDE Recording Device Information The Device At-A-Glance Card included with myPower ALL enables you to record the information you need to use myPower ALL with each of your portable devices. Simply record the device name, required voltage, and reference letter for the compatible adapter .
10 T roubleshooting If myPower ALL does not power the portable device or charge the device battery , take these steps: 1. V erify that the current consumption of the portable device is not more than 3.
Limited W arranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period T ekkeon, Inc. will replace the defective product when the owner returns all product contents.
12 Customer Support Customer support for myPower ALL is available at: T ekkeon, Inc. c/o myPower ALL 3002 Dow Avenue, #134 T ustin, CA 92780 888-787-5888 / 714-832-1266 www .tekkeon.com T ekkeon, Inc. must issue a Return Merchandise Authorization (RMA) number for all exchanges or refunds.
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 13.
www .tekkeon.com © 2007 T ekkeon, Inc. Rev B All Rights Reserved myPower ™ is a trademark of T ekkeon, Inc. Cut loose. Stay loose. mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 14.
An important point after buying a device Tekkeon MP3400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tekkeon MP3400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tekkeon MP3400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tekkeon MP3400 you will learn all the available features of the product, as well as information on its operation. The information that you get Tekkeon MP3400 will certainly help you make a decision on the purchase.
If you already are a holder of Tekkeon MP3400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tekkeon MP3400.
However, one of the most important roles played by the user manual is to help in solving problems with Tekkeon MP3400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tekkeon MP3400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
