Instruction/ maintenance manual of the product ezTalker mini ET2000 Tekkeon
Go to page of 20
ET2000 v1.2 User Guide Bluetooth ® Headset for Mobile Phones UG_et2000_v1.2_r1 10/21/05 11:05 AM Page 1.
UG_et2000_v1.2_r1 10/21/05 11:05 AM Page 2.
USER GUIDE Contents Over view ............................................................................................................................ 2 Unpacking ezT alker mini .....................................................................
2 Over view ezT alker mini TM by T ekkeon is a miniature cord-free headset that enables comfortable, handsfree communication with your Bluetooth ® mobile phone. ezT alker mini works with your Bluetooth mobile phone to provide clear , high-quality communication.
3 USER GUIDE Getting to Know ezT alker mini Getting Started Before using ezT alker mini, you must: • Charge ezT alker mini • Pair ezT alker mini to your mobile phone • Fit ezT alker mini to your ear Directions for each of these activities are provided in the following three sections.
4 Charging ezT alker mini Before using ezT alker mini, you must charge the headset for approximately two hours. When fully charged, the battery provides up to five hours of talk time and up to 120 hours of standby time. T o Charge the Headset 1. Remove the rubber plug that covers the charging jack on the upper left side of the headset.
5 USER GUIDE T o Pair the Devices 1. T urn on the mobile phone and place it next to the headset. 2. Initiate the Bluetooth device-pairing (discover y) feature on the mobile phone. Refer to the mobile phone user guide for instructions on initiating this feature.
6 Fitting ezT alker mini On Y our Ear ezT alker mini is designed to fit comfortably in your ear . For added comfort, you can change the ezFit Earpiece. For added stability , you can add the ezEarhook. T o Place the Headset On Y our Ear 1. Place the ezT alker mini speaker in your ear with the microphone angled toward your mouth.
7 USER GUIDE T o Remove the ezEarhook 1. Gently pull the ezEarhook away from the headset stem until it separates from the headset. Powering ezT alker mini T o T urn On the Headset 1. Press and hold the T ALK button until the blue LED flashes or until you hear the On tone (approximately four seconds).
8 T o Make Calls Using Voice Dialing (if supported by your mobile phone) 1. Press the T ALK button on your headset. Y ou will hear two beeps. 2. When prompted by the mobile phone (usually about five seconds), speak the name of the person you wish to call.
9 USER GUIDE T o Answer a Call Waiting Call (if supported by your mobile phone) 1. When you hear two beeps while connected on a call, press and hold the V olume - button until you hear a short beep followed by a long tone (approximately 3 seconds). The original call will be placed on hold and the new call be will be connected.
10 Adjusting the V olume The volume can be adjusted using the volume controls on ezT alker mini or your mobile phone. T o Increase the Volume 1. Press and release the top VOLUME button + . T o Decrease the Volume 1. Press and release the bottom VOLUME button - .
11 USER GUIDE Visual and Audible Indicators T wo LEDs (blue and amber) indicate the status of the headset, while tones heard through the headset provide an audible indication of a requested action. Following are descriptions of visual and audible indicators provided by your ezT alker mini headset.
12 T roubleshooting Issue When you initiate the Bluetooth device pairing feature on your mobile phone, your phone cannot find ezT alker mini. Y our ezT alker mini headset is not communicating with your mobile phone. Y ou are encountering poor reception via the ezT alker mini headset.
13 USER GUIDE T roubleshooting (continued) Issue Even though your headset is turned on, the call is not automatically connected to ezT alker mini when you dial a number on your mobile phone. Y ou hear a crackling noise when connected on a call through the headset.
14 Disclaimer of W arranties Any user of this product does so at the user’ s own risk. T o the maximum extent permitted by applicable law , T ekkeon, Inc.
15 USER GUIDE FCC Statement for Class B Digital Devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation.
16 NOTES: UG_et2000_v1.2_r1 10/21/05 11:05 AM Page 16.
UG_et2000_v1.2_r1 10/21/05 11:05 AM Page 17.
www .tekkeon.com © 2004, 2005 T ekkeon, Inc. All Rights Reserved Rev . A4 10/05 UG_et2000_v1.2_r1 10/21/05 11:05 AM Page 18.
An important point after buying a device Tekkeon ezTalker mini ET2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tekkeon ezTalker mini ET2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tekkeon ezTalker mini ET2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tekkeon ezTalker mini ET2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Tekkeon ezTalker mini ET2000 will certainly help you make a decision on the purchase.
If you already are a holder of Tekkeon ezTalker mini ET2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tekkeon ezTalker mini ET2000.
However, one of the most important roles played by the user manual is to help in solving problems with Tekkeon ezTalker mini ET2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tekkeon ezTalker mini ET2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
