Instruction/ maintenance manual of the product BR105 Baumatic
Go to page of 32
33U d BR105, 142 Litres Built-under larder fridge.
USER MANUAL FOR YOUR BAUMATIC BR105, 142 Litres Built-under larder fridge 2 NOTE : This User Instruction Manu al contains impor tant information, including saf ety & installation points, which will enable you to get the mos t out of your appliance.
3 Contents E n v i r o n m e n t a l n o t e 4 Important safety informa tion 5 – 6 Specifications of your larder fridge 7 – 10 D i m e n s i o n s 7 Description of the appliance 8 Description of t.
Environmental note Note : Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and re nder any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be undertak en by a competent person.
Important safety information Your safety is of the utmo st importance to Baumatic. Please make sure that you re ad this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact Customer Care .
Child safety o Packaging material should be kept away from children. 6 o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket.
Specifications of your larder fridge Dimensions of appliance Dimensions o f aperture* Height: 818 - 870 mm Height: 820 – 870 mm Width: 596 mm Width: 600 mm Depth: 550 mm Depth: 600 mm (min) o Automa.
IMPORTANT: Wh en you install your appliance it is important to bear in mind its climatic rating. I n o r d e r t o f i n d o u t t h e c l i m a t i c r a t i n g o f y o u r a p p l i a n c e , y o u s h o u l d check the rating plate. The rating plat e is located on the front left e dge of the inside of the fridge.
Description of the product features 1) Shelves o The shelves may be placed in an y of the guide sl ots within the interior of the appliance. They are protected from sliding out. o To remove a shelf : Take off all of the item s that are stored on the shelf that you want to remove.
Using your Baumatic larder fridge Before switching on o Make sure that it has been insta lled by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eight hour s before connecting the appliance to your mains supply.
Switching on the appliance and setting the thermostat You switch on your appliance by co nnecting it to your mains supply and setting the thermostat. The thermo stat control knob is located on the right hand side of the fridge.
12 Arranging and storing food in your refrigerator o Warm food or evaporating liquids should not be stored in your refrigerator, as this will increa se the humidity inside of the appliance. o All foods should be wrapped or covered, this is particularly important if the food has a st rong flavour.
13 o Milk bottles should have a cap on them and be stored on the bottle shelf that sits in the door. o Garlic, potatoes, onions an d bananas should only be stored in a refrigerator IF they are stored in airtight containers. Saving energy when using your refrigerator Installing: o Install the appliance in a cool posi tion.
Disposing: o If you're going to throw out yo ur old fridge, see if there's a chlorofluorocarbons (CFCs) re cycler in your area. The government department which l ooks after the environment in your area may be able to help you.
The defrost drain hole o Defrosting occurs automatically in the refrigerator compartment during operation. The defrost water is collected by the evaporating tray and evaporates automatically. o The drain hole should be cleaned periodically with the drain hole cleaner.
Replacing the light bulb WARNING: PLEASE ENSURE THAT YOU R APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO REPLACE THE LIGHT BULB. 16 o Press the rear end of the bulb cover until the sides release and then lift the bulb cover clear of the bulb.
Electrical connection YOUR REFRIGERATOR IS INTENDED FOR FITTED AND PERMANENT INSTALLATION. We recommend that the app liance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.
18 Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is st ated on the rating plate of your appliance. Your appliance may not function correctly if the ambient temperature falls outs ide of the following ranges.
Reversing the door of your appliance 19 Any parts that you remove from the appliance whilst reversing the ARNING- Take care when op ening th e hing es, they are Tools required:- wdriver er Slacken the retaining screws (1) on the appliance and then Place the appliance door on a cush ioned surface, so that it does o Lever off the cover caps (3) .
20 o Insert the retaining screws (1) into the opposite side of the o Remove the door retaining screws (2) and then reverse the o Reattach the appliance door an d then fully re-tighten the o Insert the.
21 perture dimensions The diagram below shows the aperture size that you will need to be o e the djusting the plinth/kickboard hen the appliance has been placed underneath the worktop, you may o Remove the grid on the base of the appliance by unscrewing the A able to install your appliance.
22 Use a spanner to adjust the he ight of the adjustable feet. If your aperture has a height of 820 mm, then the adjustable If your aperture has a height of 870 mm, then the adjustable The appliance should be flush with the underside of the worktop A cut out must be made in the plinth/kickboard for ventilation.
23 itting the furniture door to the appliance you need the appliance d oor to open from the other Tools required:- o Tape measure ed screwdriver IMPORTANT: We recommend that two people install this appliance.
o Place the mounting bracket (1) on the reverse of the furniture door. o The middle of the mounting bracke t should be positioned on the line that you have just drawn. Pl ease note the position of the mounting bracket in the above drawing, to ensure that you have the mounting bracket the correct way up.
c) Hang the furniture door onto th e appliance door, making sure that the brackets on the mounting bracket locate over the adjusting bolts. c) Use a screwdriver to adjust th e gap on the lower section of the adjusting bolts. The gap should be set to approximately 9 mm (as shown in the above drawing).
f) Open the appliance door. o Use a suitably sized drill bit to drill through the holes in the bracket, into the work top. IMPORTANT: The drill bit should be appropriate for the material that your work top is made from. o Secure the bracket to the unde rside of the wo rktop, using the screws provided.
Troubleshooting IMPORTANT: If your refrigerator appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist below. My fridge does not appear to be working/there is no power to my appliance. o Check that the plug is fully in serted into the power socket.
Ice has formed on the inner back wall of my fridge o Check that food has not been pu shed too far back inside the appliance, so that it is in contact with the inner back wall. o IMPORTANT: It is normal to get some ice droplets forming on the back wall of the appliance.
29 Baumatic Consumables o BC001 Degreaser for Dishwashers (200 g) o BC002 Descaler for Washing Machin es and Dishwashers (200 g) o BC003 Ceramic Hob Cleaner (250 ml) o BC004 Oven Cleaner (250 ml) o BC.
30 Technical Data Manufacturer BAUMATIC LTD Model Number BR105 Product Category 1 – Refrigeration Energy Efficiency Class (1) A+ Annual Energy Consumption (2) 117 kWh Storage Volume of Fridge Compar.
United Kingdom Baumat ic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 4372 44 Advice Line Telephone (0118) 933 6933 E-mail: sales@baumatic.
32.
An important point after buying a device Baumatic BR105 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic BR105 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic BR105 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic BR105 you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic BR105 will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic BR105, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic BR105.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic BR105. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic BR105 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
