Instruction/ maintenance manual of the product WS 8112 Technoline
Go to page of 14
16 LCD1 display LCD2 display Solar panel Battery cover Wall Mount Location Foldable stands SOLAR WALL CLOCK INSTRUCT ION M A NUAL FEATUR ES: SOLAR WALL C LOCK: • DCF-77 Radio co ntrolled time with m.
17 • Low battery indicator • Wall mount or freesta nding TO INSTAL L / REPLACE BATTERY The solar wall clock can use either the included 1 x AA Alkali ne rechargeable battery (c harged by solar panel) or 1 x AA Alkaline battery (no n-rechargeable; not incl uded).
18 To use a non-rechargeable alkaline battery: 1. Remove the incl uded rechargeable AA battery from t he compartment. 2. Use the switch to sel ect the alkaline battery (see bel ow). 3. Insert 1 x AA, IEC LCR6, 1.5 V Alkaline battery i nto the compartment, observi ng the correct polarity (see marki ng inside battery compartme nt.
19 SETUP AFTER CHAN GING/REPLA CING THE BATTER Y 1. After powering up the solar clock, all LCD segme nts will light up briefly and it w ill show the time (00:00), i ndoor temperature, date, and indoor humidity. 2. Next, the DCF time code rec eption will automati cally start.
20 time code is received, the DCF tower becomes perma nently li t and the time will be displayed. Daily DCF recepti on is done at 03:00. If the recepti on is not successful at 03:00, then the ot her reception occ urs at 05:00. If the reception at 05:00 is stil l not successful , then the next try will take pl ace the next day.
21 Weekday Indoor temperature Low battery icon LCD SCREEN DESCRIPT IONS The radio-controll ed clock's LCD is divi ded into 2 sections and once the batteries are inserted, al l the segments wi ll light up briefly before dis playing the information for ti me, date, indoor temperature and indoor hum idity.
22 TIME ZONE SETTING The time zone can be set betwee n the 0 to -12 hour and then runs from 12 back to 0 i n consecutive 1-hour interval . To do this: 1. After pressing the SET-B utton the current ti me zone value starts flashi ng. 2. Use the + key to set the ti me zone.
23 1. The year digits wi ll start flashing (only last 2 di gits) on LCD2. Select the desi red year by use of the + key. 2. Press and release the SET key to switch to the “Month Setting” . MONTH SETT ING 1. The month digit on LCD2 wi ll start flashing (Defa ult setting 1).
24 1. The characters “° C” or “° F” will start flashing on LCD1. By use of the + key select “° F” for tem perature displ ay in degrees Fahrenheit or “° C ” for degrees Celsius. 2. Press and release the SET key to enter the mode “Solar Mode Setting” .
25 If the solar m ode setting is OF F: • LCD will remain ON constantly. EXIT THE MAN UAL SET TING MOD ES • To return to the normal display mode from anyw here in manual setting mode si mply press the SNZ key a nytime.
26 ALM key in normal mode di splay. The alarm i con will disappear, the alarm is now off. SNOOZE SETT ING The snooze can only be acti vated during al arm time for a snooze duration of 10 minutes by pr essing the SNZ key o n the back of the clock.
27 CARE AND MAINTENANC E: • Avoid placing the unit i n areas prone to vibrati on and shock as these may ca use damage. • Avoid areas where t he unit can be exposed to s udden changes in temperature, i .e. direct sunlight, extreme col d and wet/moist condi tions as these will lead to rapi d changes which reduce the acc uracy of readi ngs.
28 Dimensions (L x W x H) Solar clock : 233.4 x 28.4 x 216.5mm LIABILITY D ISCLAIMER • The electric al and electronic wastes contain hazardo us substances.
29.
An important point after buying a device Technoline WS 8112 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Technoline WS 8112 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Technoline WS 8112 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Technoline WS 8112 you will learn all the available features of the product, as well as information on its operation. The information that you get Technoline WS 8112 will certainly help you make a decision on the purchase.
If you already are a holder of Technoline WS 8112, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Technoline WS 8112.
However, one of the most important roles played by the user manual is to help in solving problems with Technoline WS 8112. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Technoline WS 8112 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
