Instruction/ maintenance manual of the product SkyFunk 3 2 TechniSat
Go to page of 8
Operating manual SkyFunk 3 2,4 GHz wireless transmission system bed_anl_SkyFunk3_engl.qxd 25.09.03 09:07 Seite 1.
Contents Chapter T opic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1 Safety advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 General .
Before operating your unit for the fir st time, please chec k that you hav e received all the components!!! The follo wing components ar e supplied as standar d: 1 SkyFunk 3 transmitter 1 SkyFunk 3 re.
4 3 Connecting the SkyFunk 3 system > Connect the mini DIN connector (green) of the adapter cable supplied, carring the inscription Transmitter to the SkyFunk 3 T ransmitter . > The IR-extension should be placed in such a way that there is a line of sight to the IR window (usually located on the display of a unit) of the video source.
> Connect the Mini DIN connector (violet) of the adapter cable supplied, labelled Receiv er with the SkyFunk 3 receiver . > The SkyFunk receiver should be positioned in such a way that the red IR window has an unobstructed line of sight to the remote control unit.
4 Setting up the units 4.1 General Please note the following when setting up the units: > If possible, the units should be positioned 1-2 metres above the ground/floor > T o avoid the units being damaged in a fall to the floor , they should always be positio- ned on a level surface.
5 Operation When you have worked through all the points, your SkyFunk 3 is ready for operation. > Switch on both units by means of the mains power switc hes . 5.1 Setting the transmitter and receiver channels T o change the transmitter resp. receiver channel, select the desired channel on both units (transmitter and receiver).
6 T rouble-shooting guide 7 T echnical data 8 1 10903 Problem Possible cause No picture, no sound > Mains switch or receiver and/or transmitter not switched on > Cable connections faulty > Re.
An important point after buying a device TechniSat SkyFunk 3 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TechniSat SkyFunk 3 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TechniSat SkyFunk 3 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TechniSat SkyFunk 3 2 you will learn all the available features of the product, as well as information on its operation. The information that you get TechniSat SkyFunk 3 2 will certainly help you make a decision on the purchase.
If you already are a holder of TechniSat SkyFunk 3 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TechniSat SkyFunk 3 2.
However, one of the most important roles played by the user manual is to help in solving problems with TechniSat SkyFunk 3 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TechniSat SkyFunk 3 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
