Instruction/ maintenance manual of the product 100Hz Television sets Colani-TV Classic Line TechniSat
Go to page of 32
Instruction Manual for 100Hz T elevision sets Colani-TV • Classic Line Made in Germany www .technisat.de.
Contents 1 Dear customer , We would like to congratulate you for choosing a T echniSat television set, which has been produced according to the most modern, up-to-date technical stan- dards.
➫ Connect to power supply 230V/50Hz AC ➫ The TV set is designed to receive and reproduce only sound and video signals. ➫ The set is designed to be connected only to audio and video equipment, antenna installations and computers that comply with DIN standards, and carry a CE certification.
3 Operation and Safety ➜ Apply slight pressure to the marked spot in order to open the back cover of the remote control unit. ➜ Insert the batteries supplied with the set, ensuring that their polarity complies with that indicated in the battery compartment.
4 Control elements Remote control Sound selection Channel A/B Stereo/Mono/Dual Parental lock * Format change (at 16:9) Sound Mute (on/off) Standby/on Numeric keypad OK- Multifunction key Programme + V.
Daily Operation 5 ➜ T o switch on, press the Power key on the front panel of the TV set. ➜ Use either the Standby/ on key on the remote control unit. Or ➜ Use the Programme keys on the remote control unit. Or ➜ Use the keys 0 to 9 on the numeric keypad.
Daily Operation 6 ➜ Press the A/B key to select the desired mode of sound reproduction. ➜ If the programme selected has mono sound, the A/B key has no function. Sound reproduction of terrestrial or cable programmes ➜ In the case of stereo broadcasts, use the A/B key to switch between MONO and STEREO.
Daily Operation 7 ➜ Press the T ele text on key to call up video text. If the channel provides tele text, page 100 (main introduction) will be displayed by default. All other pages will be available within a time of 30 seconds maximum. This is the time required by all channels to broadcast their pages.
Settings 8 Numerous settings can be made and adju- sted by means of on-screen menus, and new settings can be stored in memory for perma- nent use. The menus are arranged in such a way that, starting with a main menu one can work through sub-menus to arrive at all possible settings.
Settings 9 This menu provides facilities to adjust the sound reproduction to your individual prefe- rences, and to store these in memory . ➜ Press the MENU key to select the Main Menu. ➜ Use the Programme keys to mark the menu item Sound Settings , then press the OK key to select.
Settings 10 Although the automatic programme scan sets all available channels/programmes, the menu Programmes allows you to make changes in the programme list. The TV set provides for three options: - manual setting of programmes - Repeat automatic (TTS) scan - Change order of channels ➜ Press the MENU key to display the Main Menu.
Settings 11 This menu item allows you to set a name of your choice for each channel, with a maxi- mum of 6 characters. ➜ Use the Programme keys to mark the menu item Name, then press the OK key to confirm. ➜ Use the V olume keys to select the item to be changed.
Settings 12 For satellite channels, the source SA T must be selected. ➜ Use the Programme keys to mark the menu item Source. ➜ Use the V olume keys to set SA T , then press the OK key to store in memory . This menu item allows you to set a name of your choice for each channel, with a maxi- mum of 6 characters.
Settings 13 ➜ Use the Programme keys to mark the menu item Mode. ➜ Use the V olume keys to select STEREO, MONO A or MONO B, then press the OK key to store in memory . Satellite channels broadcast with varying gain (contrast). In order to avoid distortions in the white areas of any picture, the contrast must be adjusted.
Settings 14 The scan will search for programmes, sort them, and store them in memory automatical- ly , beginning with programme slot 1. In this process, any terrestrial or cable channels found will be.
Settings 15 In this function, two programmes exchange their slots in the programme list. ➜ Use the MENU key to display the Main Menu. ➜ Use the Programme keys to mark the menu item Programmes, then press the OK key to select. ➜ Use the Programme keys to mark the menu item Change Order , then press the OK key to select.
Settings 16 No adjustments are necessary for a modern, standardised external unit. If the external unit has specific features, such as multiswitches, mono-cable solutions, or similar , the following procedures must be fol- lowed to make the necessary adjustments.
Settings 17 ➜ Use the Programme keys to mark the menu item Position. ➜ Use the V olume keys to select Position A or B, then press the OK key to store in memory . The Satellite menu will display the menu item Matrix instead of Position, providing the subsidiary options Position and Option.
Settings 18 A V equipment such as camcorders, video recorders, DVD players, decoders, or satellite receivers, can be connected to the TV set using either the SCART sockets provided at the back of the set, or via the sockets (cinch, Hosiden) provided under the front flap of the set.
Settings 19 Using the front input sockets behind the front panel, playback of videos in VHS or Video 8 (Video) or in SVHS or Hi8 (S-Video) formats is possible.
Settings 20 The TV set has an internal clock, as well as several timers. Y ou will generally not have to set the date and time, as the internal clock is set automa- tically each time the set is switched on. The correct time is downloaded from the tele text information of whichever programme has been stored in programme slot 1.
Settings 21 ➜ Use the Programme keys to mark the menu item Programm. ➜ Use the V olume keys to select the programme in single steps, then press the OK key to store in memory . ➜ Use the Programme keys to mark the menu item Start T ime , then press the OK key to confirm.
VGA/ Computer Connection 22 As the TV set is equipped with a VGA interfa- ce, a computer image in VGA mode (640x480 dots/ 60 Hz) can be shown as a full-screen image. T o do this, you will require a monitor cable with 2 x Sub-D 15-pin plugs, in order to connect the monitor output of the graphics card with the VGA input of the TV set.
VGA Computer Connection - ADR 23 Horizontal Shift ➜ Set the image to be in the centre of the screen on the horizontal plane, then press OK key to store in memory . Horizontal Size ➜ Set the width of the image so that all parts of the PC image are visible on the left and right borders of the image, then press the OK key to store in memory .
ADR (ASTRA DIGIT AL RADIO) 24 Storing new ADR programmes in memory T wo possibilities exist for this: A complete scan of all ADR programmes, which will automatically find any new pro- grammes. Or Storing individual programmes in memory , for which you will need the information pertaining to the programmes (see list station program- ming).
T echnical T erms (Glossary) 25 AFC - Automatic Frequency Control - tunes the programme automatically ADR- A STRA D IGIT AL R ADIO - high quality radio reception via satellite Antenna cable - Cable co.
Index of keywords T rouble-shooting guide 26 Page 16: 9 format 8 22 kHz signal 16 ADR module 3 ADR - store programmes 23ff ADR - programme list 14 ADR - operation 23 AFC 12 Audio type (setting) 12 Aud.
27 Use the following tables to record your individual programme allocations Programme Allocation T ables 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35.
T echnical Data 28 TV set Classic Line Classic Line Classic Line Classic Line Colani Colani 72-5004C 70-5001C 63-5001C 55-5002C 72-5000C 55-5003C T ube T ube type rectangular-invar Blackline S Blackline S Black Matrix Superflat Black Matrix Screen size (diag.
Brief operating instructions T o switch the set on or of f ➜ Press the Power key at the front of the TV set T o switch on from standby mode ➜ Press the Standby/on key on the remote control or ➜ .
Brief operating instructions ➜ Press the yellow ? key to display or hide a help table ➜ Press the blue INFO key to display the time and other information ➜ Press the EXT key to switch trough the.
Instruction Manual for 100Hz T elevision sets Colani-TV • Classic Line Made in Germany www .technisat.de.
An important point after buying a device TechniSat 100Hz Television sets Colani-TV Classic Line (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TechniSat 100Hz Television sets Colani-TV Classic Line yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TechniSat 100Hz Television sets Colani-TV Classic Line - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TechniSat 100Hz Television sets Colani-TV Classic Line you will learn all the available features of the product, as well as information on its operation. The information that you get TechniSat 100Hz Television sets Colani-TV Classic Line will certainly help you make a decision on the purchase.
If you already are a holder of TechniSat 100Hz Television sets Colani-TV Classic Line, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TechniSat 100Hz Television sets Colani-TV Classic Line.
However, one of the most important roles played by the user manual is to help in solving problems with TechniSat 100Hz Television sets Colani-TV Classic Line. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TechniSat 100Hz Television sets Colani-TV Classic Line along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
