Instruction/ maintenance manual of the product LCD46-920 Technika
Go to page of 37
COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767 LCD46-920.
English - 1 - Contents Features ................................................................. 2 Accessories ............................................................ 2 Introduction ............................................................. 2 Preparation .
English - 2 - Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition signals. • USB input. • 200 programmes from VHF , UHF(analogue).
English - 3 - Safety Precautions Please read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience.
English - 4 - Installation T o prevent injury , this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available). LCD Screen The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details.
English - 5 - Overview of the Remote Control SUBTITLE SLEEP F IN O/ PE ST RE R E T U R N V P 1 4 7 2 5 8 3 6 9 JKL STU DEF MNO VWX PQR YZ M OK GHI S O U R C E ABC EPG 0 SCREEN LANG FAV TV DTV SA P W Standby 1. Y ellow / Feature menu / Current language 2.
English - 6 - LCD TV and Operating Buttons Standby button 1. TV/A V button 2. Programme Up/Down buttons 3. V olume Up/Down buttons 4. Note: Press “ ” / “ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors 12 13 1.
English - 7 - 5. SCART 1 inputs or outputs for external devices. Connect the SCART cable between SCART sockets on TV and SCART socket on your external device (such as a decoder , a VCR or a DVD player). Note : If an external device is connected via the SCART sockets, the TV will automatically switch to A V mode.
English - 8 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to 1. view all the channels that you subscribe to. For more information, see “Conditional Access” section. Side USB input . 2. Note : Codec update cannot be performed.
English - 9 - Power Connection IMPORT ANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet.
English - 10 - When the connection is made, switch to YPbPr source. See, “Input selection” section. • Y ou may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown below . Note : These three methods of connection perform the same function but in different levels of quality .
English - 1 1 - Inserting Batteries in the Remote Control Handset • Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part. • Insert two AAA/R3 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover .
English - 12 - Operation with the Remote Control • The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV . • Functions of the menu system are described in the following sections.
English - 13 - Select your Country , Language and T ext language by using “ ” or “ ” and “ ” or “ ” buttons. Press OK or RED button to continue. T o cancel, press the BLUE button. For more information on this process, see “Install Menu” section.
English - 14 - following warning message display on the screen (* for UK only): Digital T eletext (** for UK only) • Press the TELETEXT ( ) button. • The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons and OK button.
English - 15 - Note : If you enter the same programme number of the channel that you want to move, “.... channel services will be replaced. Do you want to continue?” OSD will be displayed.
English - 16 - How to Add a Channel to a Favourites List • By pressing “ ” or “ ” buttons, highlight the channel that you want to add to the favourite list. • By pressing OK button, the highlighted channel is added to the Favourite List. • F icon indicates that a channel is added to Favourite List.
English - 17 - • T o see the viewing contract information: enter IDTV ; press the “ M ” button, then highlight Conditional Access and press the OK button. • When no module is inserted, “No Conditional Access module detected” message appears on the screen.
English - 18 - channels as well. If it is set as OFF manually , encrypted channels will not be located while in automatic search or manual search. Use “ ” or “ ” button to select Scan Encrypted and then press “ ” or “ ” button to set this setting as On or Off.
English - 19 - screen. Current T ime,T ime Zone Setting and Time Zone will be available. Use “ ” or “ ” buttons to highlight the T ime Zone Setting. T ime Zone Setting is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL. When AUTO is selected, Current Time and Time Zone options will not be available to be set.
English - 20 - Notes: • System Language determines the on-screen menu language. • Audio Language is used for selecting the soundtrack of a channels. • Primary settings are the fi rst priority when multiple choices are available on a broadcast. Secondary settings are the alternatives when the fi rst options are not available.
English - 21 - First Time Installation The user can use this item to load default settings, which were loaded to the receiver at the factory . T o install factory settings, highlight “First T ime Installation” menu item and press OK button, then you will be asked whether or not to delete the settings.
English - 22 - Viewing JPG Files Jump (Numeric buttons) : jump to selected fi le using the numeric buttons. OK : views the selected picture in full screen. Play / Slideshow (Green button) : starts the slideshow with all pictures in the folder . Slideshow Options Pause (Y ellow button) : Pause the slideshow .
English - 23 - Press “ ” or “ ” button to select Noise Reduction. Press “ ” or “ ” to choose from one of these options: Low , Medium , High or Off . Film Mode Films are recorded at a different number of frames per second to normal television programmes.
English - 24 - Headphone Press “ ” or “ ” button to select Headphone . Press “ ” button to view the headphone menu. Headphone sub-menu options are described below: V olume Press “ ” or “ ” button to select V olume . Press “ ” button to increase headphone volume level.
English - 25 - Note : This setting will be inactive if the TV is set to Pap mode. PIP Position This setting is used for moving the sub picture. Select PIP Position item by using “ ” or “ ” button. Use “ ” or “ ” button to adjust PIP position.
English - 26 - Install Menu Program Press “ ” or “ ” button to select Program. Use “ ” or “ ” button to select the program number . Y ou can also enter a number using the numeric buttons on the remote control. There are 200 programme storage between 0 and 199.
English - 27 - Name T o change the name of a programme, select the programme and press the RED button. The fi rst letter of the selected name will be highlighted. Press “ ” or “ ” button to change that letter and “ ” or “ ” button to select the other letters.
English - 28 - into correct place automatically . This setting therefore automatically optimizes the display . Select Autoposition item by using “ ” or “ ” buttons. Press OK or “ ”, “ ” button. Warning : Please ensure auto adjustment is performed with a full screen image to ensure best results.
English - 29 - Press “ SCREEN ” button to directly change the zoom mode. Available zoom modes are listed below . Note : In YPbPr and HDMI modes, while in 720p-1080i resolutions, only 16:9 mode is available. In PC mode, only 16:9 mode is available.
English - 30 - “ ” Reveal Shows hidden information (e.g. solutions of games). “OK” Hold Holds a text page when convenient. Press again to resume. “ ” Subcode Pages Selects subcode pages if available when the teletext is activated. P+ / P- and numbers (0-9) Press to select a page.
English - 31 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of some of the typical video display modes. Y our TV may not support dif ferent resolutions. Supported resolution modes are listed below .
English - 32 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.
English - 33 - Appendix E: Supported File Formats for USB Mode Media File Extension Format Remarks Video Audio (Maximum resolution/Bit rate etc.) Movie .mpg/ .dat/ .vob MPEG1 MPEG Layer 1/2/3 60 Hz (frame refresh rate). MPEG2 MPEG2 60 Hz (frame refresh rate).
English - 34 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IE.
English - 35 - CA UT ION TO PREVE NT ELECTRIC SH O CK DISCONNECT FROM THE M A INS BEFORE REMOVING COVER. NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFI ED SERVICE PER SONNEL . SA FETY PRECA UTIO N THI S DE VICE MUST BE DI SCONN ECT ED FROM THE MA INS W HE N NO T IN USE.
5 0 1 5 7 2 5 8.
An important point after buying a device Technika LCD46-920 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Technika LCD46-920 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Technika LCD46-920 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Technika LCD46-920 you will learn all the available features of the product, as well as information on its operation. The information that you get Technika LCD46-920 will certainly help you make a decision on the purchase.
If you already are a holder of Technika LCD46-920, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Technika LCD46-920.
However, one of the most important roles played by the user manual is to help in solving problems with Technika LCD46-920. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Technika LCD46-920 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
